Tag: tactical reviews

Light Review: Surefire E2D Defender and Stiletto

16 February, 2020

With Surefire, your main expectations might be high quality build and performance, so read on to see if these lights keep up with Surefire’s standards. In this review are two quite different models; the latest update of the classic Defender E2D (in this case the two-mode ‘Ultra’) and the EDC-optimised pocket-friendly USB-chargeable multi-mode, programmable Stiletto.

What are we looking at?:

Though this review is all about the two headline lights, as well as primary cells I’ve been able to test the Surefire rechargeable cells for the Defender.

Moving onto the main feature let’s get into the details of these two.

Taking a more detailed look at the Stiletto:

The Stiletto is a new style of light, taking on more of the form of a pocket knife and slipping into your pocket in the same way, and with a clip to hold it in place. To achieve this narrow profile it has a built-in battery and USB charging, allowing the shape to not be compromised by replaceable batteries.

Taking a more detailed look at the Defender E2D Ultra:

The Defender E2D is a classic Surefire model, bit it has moved with the times. Starting life as a incandescent bulb light with lens/reflector, it has grown to use LED and TIR optics. This latest version has raised the output to 1000lm+. It is mainly the head of the light that has changed in appearance compared to the earlier models you might know.

Surefire’s rechargeable CR123 option:

Surefire have been a little behind other manufacturers with regard to taking up rechargeable batteries. In years past, dedicated Surefire owners have had to find their own way, often going to the lengths of getting their battery tubes bored out to take 18650 cells plus a few other methods.
In this case, the cells themselves are not Surefire branded, instead Surefire have chosen K2 Energy’s Lithium Phosphate cells.

The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and my wife won’t have one!

The character of each beam is really very different. Starting with the Defender and it’s mix of smooth hot-spot and spill beam giving a very useful all-round capability. The spill beam is surprisingly wide, so much so you can see the bezel crenellation shaping in the outer edge of the beam.

The Stiletto has a Surefire ‘MaxVision beam’; I’ve come across a few variations of this, but in essence they have all been quite wide and evenly lit to give you ease of vision at close to mid ranges. You will notice in the direct comparison that the Defender’s beam is actually wider than the Stiletto’s. This is even more noticeable in the outdoor beam-shots. The Stiletto however lacks the hot-spot and provides nicely even lighting.

Batteries and output:

To measure actual output, I built an integrating sphere. See here for more detail. The sensor registers visible light only (so Infra-Red and Ultra-Violet will not be measured).

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

This is a table of measured results. PWM frequencies are recorded by an oscilloscope, and in some cases are clear and in others are more like superimposed noise. It only appeared that the Defender’s High beam when using the RCR123 cells showed any PWM. This is possibly due to power supply pulsing with the different voltage of the RCR123 cells which were able to produce a higher maximum output than on CR123.

In the runtime graphs, first check the start of the run and you can see how the RCR123 cells are capable of keeping that peak output from the Defender until the programmed slope-off of the output after 60s. However skip onto the full runtime and you can see the RCR123 cells run out after thirty minutes, but the CR123s go on a lot longer and with much more warning they are getting low. For ‘duty’ use you will still want to use CR123s, but the RCR123s give great guilt-free lumens.

Performance is solid from the Stiletto and output is more than good enough for EDC; 45 minutes of 500lm-plus output is impressive.

The Defender E2D Ultra and Stiletto in use

Though by no means a lesser light, there is perhaps slightly less to say about the Defender E2D, so I shall start with that. For me the ‘Ultra’ version is absolutely the one to have. The output levels are so opposite with a 9lm Low and a 1000lm+ High, these might seem too at odds to work well, but they do. If I could add one thing to the Defender E2D it would be a way to user program the Low to be the first mode, but without this the High-Low mode order ensures it lives up to its name.

Thanks to the beam shape and hot-spot, the 9lm mode does a great job for those daily needs of a bit of light. It hits the right balance of being low enough for complete darkness but not so low it is useless for anything but pitch black.

I have many 1000lm+ lights and many into the 5000lm+ level, yet the Defender seems to manage to appear brighter than similar output lights. I have never been left wanting by the Defender (running on the RCR123) with its solid performance and beam profile.

The slim body allows easy cigar gripping and general operation is what you expect from a tail-switch light.

And the Stiletto, this is a very different concept and is very different to use. It’s flat profile and large pocket clip make it one of the easiest lights I’ve used to pocket carry. Ergonomics are a really strong point with the Stiletto. In general use you will find the main side-switch falls nicely under your thumb. Side-switches are far superior to tail switches for EDC tasks, and make it more comfortable to hold the light for extended periods with a low arm position.

But of course, the Stiletto also has a tactical tail switch so you have the option of the high tactical grip with direct access to High. This leads me to the set of images in the gallery as I personally found the tail switch (which is quite stiff) gave me a few issues with grip and the Stiletto sliding forward. I had to use two methods to keep it stable; one was to hook my little finger just round the front of the aluminium head, and the other was to ensure I had the Stiletto rotated so I was gripping onto its width and not onto the flats. (check the gallery for examples) It has been fatiguing to use the tail-switch for longer periods, but with the streamlined shaping this is unavoidable.

The Stiletto’s main power switch is one of three areas on the rubber side panel; I am mentioning this to describe something else to be aware of. To the left of the main switch is a programming switch, this has not caused any issues in general use. However, the USB charging port cover is something to be aware of as I have often found myself trying to turn it on by pressing this part as it is quite ‘button-like’. It is very easy to do this, especially if wearing gloves, so just needs a little awareness and grip adjustment to correct.

‘Programming switch’ – yes the Stiletto can be programmed, with each switch independently programmed into one of two modes. I definitely prefer the default mode and I’d only change if I were mainly going to use the Stiletto in High. Programming is very easy – you hold the programming switch down until the indicator shows blue and then press either the main-switch or tail-switch to toggle it between modes. This programming switch also activates the emergency strobe.

Having three levels and the ability to swap the order from L-H or H-L is very useful. The most used mode for me was the Low, followed by Medium. High was too powerful for most of my EDC uses, but great to have for quick blasts.

The previous gallery has two in-use photos on a pathway to compare these two lights. In the earlier beam-shot gallery you could see the effect of the even circle of light the Stiletto emits. Once you get outdoors and don’t have light bouncing round to fill in the areas beyond the outer edge of the beam – the tunnel vision effect becomes more pronounced. You can see with both the Defender and Stiletto aimed in the same way, the Defender view is complete where the Stiletto’s beam leaves you blind beyond the narrower circle of the beam. Using the Stiletto in unlit areas required more beam movement and scanning to see where your feet are going.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that covered in the review.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

I’m trying something slightly different and starting with what doesn’t work so well, so I can finish on a more positive note

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Defender E2D Ultra – no direct access to Low.
Stiletto – tail-switch a bit too stiff to hold-on in tactical mode.
Stiletto – beam profile can cause tunnel vision in unlit outdoor areas.

_______________________________________________
Things I like
_______________________________________________
Defender E2D Ultra – Powerful output (that seems more than it is).
Defender E2D Ultra – Great beam profile.
Defender E2D Ultra – Excellent neutral beam colour.
Defender E2D Ultra – High and Low level.
Defender E2D Ultra – Lockout.
Defender E2D Ultra – Slim and easy to carry.
Defender E2D Ultra – Super quality build.
Stiletto – Very ‘pocket friendly’ shape.
Stiletto – Choice of modes.
Stiletto – Two switches, side and tail.
Stiletto – Programmable modes for switches.
Stiletto – USB chargeable.
Stiletto – Fuel gauge indicator.
Backed by Surefire’s guarantee.

 

Discussing the Review:

The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

CandlePowerForums – Flashlight Reviews Section (Largest and Friendliest Flashlight Community Forum)

Knife Review: Fox Suru – Exclusive Heinnie Haynes Edition

8 January, 2019

In this review, the Fox Suru on test is not just any old Suru, it’s the ‘Heinnie Haynes Edition’. As well as having global reach, Heinnie Haynes is the UK’s largest seller of knives and EDC gear. With its roots in the UK market there is particular interest in knives which are UK EDC Legal. There is much confusion over the knife laws in the UK, thanks to plenty of misinformation, despite the law actually being very simple. Sticking to the basics of the law, any non-locking folding knife with cutting edge less than 3″ can be EDCed legally.

The Fox Suru in its standard form is a compact, integral-lock, flipper knife – an almost perfectly unsuitable knife for the UK market, but Bruce from HH had the vision to see great potential in the small robust folder, if only it could be made a flipper-free non-locker. After working out the details with Fox, we now have exactly that, a slip-joint Suru. Though intended for the UK market, the creation of the slip-joint Suru has streamlined the original design and resulted in a knife suitable for users around the world with, or without, similar EDC knife carry restrictions.

A few more details:

We’ll start of with the presentation of the knife, both from Heinnie Haynes and from Fox. The review sample was sent to me exactly as with any other HH customer order.

What’s in the box?:

A Couple of Extras:

With Heinnie Haynes having so many extras to choose from, also included for use during testing was the MAM slip pouch, and Maxpedition’s Micro Pocket Organiser.

A good look round the Fox Suru Heinnie Haynes Edition – Things to look out for here are:

This is one of four different colour options and has a black PVD coated Titanium handle (though this is actually more of a very dark grey) with Bronze coloured hardware. The Heinnie Edition Suru started as the frame-lock flipper Suru, but as you will see, nothing looks out of place, instead appearing as if it had always been designed this way.

Explained by the Maker:

The reasons for certain design choices may not be clear when simply looking at an object, so this section is intended to give an insight into the thinking behind a design by speaking to the designer themselves.

Bruce from Heinnie Haynes took the time to speak with me about the knife.

This particular ‘Heinnie Haynes Edition’ actually came about the very day before the Suru won knife of the year at Blade Show 2018. It happens to be Bruce’s favourite size of knife and he particularly liked the solid feel and thick blade coupled with the strong, precise, feel and operation. After seeing and loving the original Suru, with the UK market in mind, Bruce knew that the flipper was going to make it impossible to sell, so asked Fox if they could do a run without the flipper. Fox said they could do that but would need to cut a new blade shape separately, meaning a minimum of 300 being made. At a starting point of 300, with the knife being a lock-knife it would still limit the market for the flipper-free version. So Bruce took it one step further and asked that if a new blade is being made, can’t the rear be extended and an extra detent added. This would be so that the lock-bar doesn’t close behind the blade instead converting it to be non-locking (with detent holding the blade open). Initially Fox were concerned this would make it seem like the knife was ‘broken’ and the lock not working, so were very reluctant. Bruce stuck to his convictions and persuaded Fox to go ahead with the Heinnie Edition.

After placing the order, Bruce had to wait for the final production run to actually see the knife he had redesigned; it was a bit nerve-racking opening the first box. When they arrived it turned out that not only had the blade been changed, but the lock-side handle had also been changed and it was no longer a frame-lock handle; instead the detent spring has been moved to the centre of the handle. Bruce originally thought he was asking only for the blade to be changed and felt a little guilty the handle needed to be changed as well; however, the result is even better thanks to this extra work by Fox.

Making this knife EDCable broadens its appeal in the UK market considerably with the relatively limited choice of suitable knives. Being a Heinnie customisation HH currently have exclusive rights to the slip-joint version.

If the current run sells well enough Bruce would like to go for a few more variants than the initial four. Always a bit of a guessing game, the split in sales between these four variants is so far not as originally envisioned. The black/bronze one (in this review) is the most popular, followed by the black/blue and the plain level-pegging in second, with the plain/blue being the least popular (at the time of writing). It was the plain/blue one that Bruce most likes and thought would sell out first.

Interestingly, as the number of ‘flipper’ knives is still on the increase, and with this being a genuine problem in the UK, (as it not something that can be sold), Bruce (and I also agree) is starting to see flippers as ugly; the flipper tab sticking out makes the knife ungainly especially when folded. This Heinnie edition of the Suru looks much more streamlined without the flipper tab getting in the way.

The Blade and Handle – Detailed Measurements:

Now even more detailed!

Taking things far beyond most knife specifications, in this section I will be carrying out a detailed examination of geometry, balance, edge bevels, factory sharpness and structural edge testing using the industry leading measuring tools.

These measuring tools include a Vernier protractor, callipers, fixed radius gauges, the unique Arc Master adjustable radius gauge, Edge On Up’s BESS Certified PT50A and SET tester along with CATRA’s Hobbigoni LASER Edge Protractor.
The BESS ‘C’ scale of sharpness (Brubacher Edge Sharpness Scale) will be used to verify the sharpness of the factory edge and allow the knife to be brought to a minimum standard sharpness before testing a blade’s cutting performance.

The measurements have been tabulated and are presented along with a few reference blades. The ‘Balance relative to the front of the handle’ tells you if the knife will feel front heavy, or if the weight is in your hand (a positive value means the weight is forward of the front of the handle). The ‘Balance relative to the centre of the handle’ indicates how close to a ‘neutral balance’ the knife has in the hand.

The blade is made from M390 steel.

What it is like to use?

Having not previously handled the original Fox Suru, I was not familiar with the size of this knife. Certainly on first seeing it I was surprised how compact it actually is. From photos of it on its own, there is a sense it is a larger knife. Considering that this is intended to be an EDC knife, that compact size has proven to be a real benefit and just made it an easy carry.

Frequently, frame-lockers can be reluctant to open with the thumb as it is so easy to accidentally apply pressure to the lock-bar and so engage the blade retention detent more firmly. With Fox changing the lock-side handle as they have done, it make this version of the Suru very good at OHO using the opening hole. The action is crisp, with a good snap into the open position.
As you can see in these photos, the handle is really a three-finger-grip handle due to its compact size. You have two choices for the normal forward grip, firstly and most naturally, you choke up on the blade with your index finger sitting in the finger choil in front of the pivot with you remaining fingers on the handle. This grip will give you the most control and power, but if you want a little more reach for the blade, you can come back on the handle so your index finger is now behind the pivot. Not as safe (though perfectly safe if using the proper cutting style for non-lockers), but it does give a bit more reach.

Before discussing the next gallery, there was just one minor problem I came across during testing; the blade pivot loosened to the point the blade was quite wobbly and way off centre when closed. This was after a few hundred opening and closing cycles, but I had not thought to check the pivot screw before starting testing, so I don’t know if it was already loose when it arrived. A quick and easy adjustment later using a T9 Torx screwdriver bit, and the pivot was back to how it should be, with the blade having no play and opening smoothly. Concerned it had worked loose during normal use, I went about positively trying to get it to loosen up again and have unrelentingly opened and closed it (having to change hands frequently – and yes it works perfectly left or right handed) hundreds of times. I do apply a reasonable amount of sideways pressure to the blade when OHOing the knife and the pivot has loosened again. Once it starts to get loose, it then loosens even more quickly. Actually this doesn’t really impact on its use, giving you enough warning to tighten it up again before it gets too bad. I think a spot of thread-lock is imminent.

People like to carry knives in a few different ways. I’m not a fan of carrying a knife clipped to the edge of a pocket as I don’t like collecting pocket lint, wearing away the edge of the pocket, and those instances where as you move about and sit down, that a knife can be pushed up and off the pocket edge; lots of knives are lost that way. So this leads me to the two other options here. The MAM slip-pouch is a simple leather pouch to keep the knife dust and scratch free while in your pocket. It is a snug fit for the Suru needing a ‘toothpaste tube squeeze’ technique to get it out of the pouch, and has kept the Suru in perfect condition.

I am frequently swapping coats and bags and tend to loose track of my EDC gear if I have it distributed and doubled-up (tripled etc) across all those coats and bags, so prefer a small organiser pouch that gets moved from coat to bag to bag to coat, and means I know exactly what I’ve got.
Though the Suru came in a pouch, and that pouch is very nice quality, it is too big for the size of knife. I have re-used that pouch for a much bigger folder.
The Maxpedition Micro Pocket Organiser is the best size I’ve found so far. I would prefer it even smaller, as unlike many people I don’t like to cram my EDC pouch full of gear that then rubs up against each other. For me this is the essential ‘knife and light’ combination, placed in the pouch so they can’t make contact. The Suru has mostly been living in this pouch with an Armytek light.

Back onto the subject of size. Included in the gallery are a few size comparison photos with some classic slip-joint knives. There is also a direct comparison with the ultra-light Spyderco Dragonfly II, which you can see is equivalent in size. The Suru has a much more substantial build, with Titanium handles and thick blade, so gives you the feel of a heavier folder in a package that is small enough to easily EDC, yet have enough cutting power to be seriously useful.

These comparison photos also show the non-threatening look of the Suru. SAKs are universally accepted even by extremely-non-knife-people, but many of the UK EDC Legal knives look a little bit too ‘pointy’ to be as easily accepted. The Suru with its wide blade and upwardly sweeping cutting edge has a softer look that is much easier for non-knife-people to be relaxed around.

Is a 4mm blade too thick for a folder this size? It certainly could be. The Suru’s blade is however much deeper than your typical folder of this size and with a nearly full flat grind, it means the blade’s primary bevel is a fine enough angle to cut very well. Where you do lose out a little is as you near the blade tip. The primary bevel and thick blade stock combine to give a very strong blade tip, but a relatively thick one.

This brings me onto the factory edge. With the grind geometry, the blade thickness behind the cutting edge increases as you go from the heel to tip. Fox have very neatly executed a factory cutting edge bevel that has a consistent width along the entire edge. Consequently, this factory edge bevel angle changes from 20DPS (degrees per side) at the heel to about 35DPS at the tip. So that is a 40 degree inclusive edge bevel at the heel and a 70 degree inclusive edge bevel at the tip; that is more than I’d put on an axe! Fox did make that edge a good sharpness, but the angle means it is not the most eager cutter. A lot of urban EDC cutting tasks involve the point, and with the factory edge, the Suru comes up feeling lacking. What also doesn’t help is that the point angle is quite wide, and with the upward sweep of the cutting edge to the tip, the cutting edge sits almost parallel to the material being punctured and cut – like this is needs a finer edge to really work.

So, time for a re-profile of the cutting edge, and I’ve take it to 15DPS along the entire cutting edge. The width of the edge bevel at the tip is now four times the width at the heel, but that is the cost of having the consistent edge bevel angle.

With this new edge, the Suru has woken up, and with the point work transformed it has allowed me pay more attention to how well the rest of the blade cuts. With a nicely exposed blade heel (just in front of the finger choil), you can carry out very fine and controlled cuts. Despite the 4mm blade stock, this part of the blade cuts like a thinner blade would.

Having an all metal construction (Titanium handles) the Suru is not a super-light folder. Other knives of a similar size are thinner and lighter, but feel insubstantial in comparison. As a non-locker, it is possible to EDC this knife where other knives cannot go, and even though compact, it has a satisfyingly solid build that gives you the confidence use it for jobs you might otherwise be reaching for a bigger knife to do.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
Things I like
_______________________________________________
Excellent fit and finish.
Titanium handles.
Solid construction.
M390 blade steel.
Ambidextrous OHO.
Compact.
Non-locking.
‘Friendly’ look.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Thick blade tip reduces piercing ability.
The blade pivot seems to work loose after a few hundred openings. (Needs some thread-lock)

 

Discussing the Review:

The ideal place to discuss this reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

The BESS Exchange – A forum discussing technical aspects of sharpness and truly understanding your sharpening process.

CLASSIC Light Review: ArmyTek Predator G2 V2.0 and Predator X V2.0 dual Review

16 November, 2018

This review of the ArmyTek Predator G2 V2.0 and Predator X V2.0 lights is a classic from 2013, and is part of the Classic Series of reviews to be published on Tactical Reviews. The original versions of the Classic Series Reviews used a well known image host who will be cutting off the visiblity of 3rd party hosted images at the end of 2018.

As consumers, and as flashlight enthusiasts, we are spoiled for choice as there many excellent lights on the market. There are a fewer number of outstanding lights, and in my opinion the ArmyTek Predator V2.0 (in whichever version you prefer) is outstanding.

In this review I have two versions of the ArmyTek Predator V2.0 on test, the Predator G2 (fitted with the XP-G2 R5 LED) and the Predator X (fitted with an XM-L U2).

Initial Impressions:

The ArmyTek Predator arrives in simple packaging that belies its incredible versatility.

The V2.0 still sports the matt anodised surface of the original Predator. This feels different to standard smooth anodising and gives the Predator a covert appearance. The finish seems to make the Predator feel less cold to touch and has good grip.

Compared to the Predator V1.2, the V2.0 has a new removable silicon rubber tactical grip ring, updated removable pocket clip, slightly larger diameter head/reflector (about 5mm bigger), is slightly shorter overall (about 6mm shorter) and has an updated selection of emitters. Initially slightly dubious about a rubber grip ring, this is very comfortable and secure to hold.

In designing the Predator, ArmyTek have managed to make what appears to be an incredibly robust and a truly military-grade light.

When you pick up the instruction sheet, your jaw might drop when you see just what the Predator is capable of, but DON’T PANIC, as you can use the Predator in its default configuration. If you are feeling a little more adventurous it doesn’t take too long to get into programming it. (Plus I’ve put together a Predator Programming Crib Sheet which will hopefully help make it simpler to do – more on that in the User Interface section)

What is in the box:

The two versions of the Predator v2.0 on test are the XP-G2 R5 (1C tint) Smooth Reflector with 5º hotspot and 24º spill

And the XM-L U2 (1C tint) Smooth Reflector with 8º hotspot and 55º spill.

Both arrived in identical boxes (just the labels shown above on the end of the box being different).

And both look the same inside.

Each Predator comes with a bezel-down holster, lanyard, pocket clip, two spare o-rings, spare switch boot, and a rubber blanking ring to use if you remove the tactical grip ring. (as both are the same I’ve only shown the Predator X)

This is the Predator X with XM-L U2.

Taking a closer look and looking inside:

When taking a closer look, most aspects of the body design are identical, so will only be shown once. The LEDs and reflectors will be shown for the G2 and X models

The side of the battery tube has two flat areas with the logo and model.

The Predator V2.0 now has a removable silicon rubber tactical grip ring which has a hole for fixing a lanyard through.

The head of the light has anti-roll flats (which combined with the grip ring keep it stable on a flat surface).

Another change from the earlier version is the tail-cap switch, which no longer sports crenulations, making the button easier to press and reducing the length of the tail-cap. The switch boot retaining ring looks like it will be a bit more challenging to remove though, now that it is smooth.

The positive contact is a raised metal pad. The battery tube ring-shaped contact is slightly raised, but has texture that makes it look like a raised part of the PCB rather than a metal contact ring, so this may not be as robust as the positive contact.

At the head end of the battery tube, the threads are bare. Two o-rings are used to seal the battery tube.

The threads are standard and cleanly cut. As supplied they are well lubricated.

At the tail-cap end there are also two o-rings and the threads are anodised. Again as supplied they are well lubricated.

The negative terminal in the tailcap is a strong spring with a metal cap to increase surface contact area and stabilise the end of the spring.

First LED is the Predator X’s XM-L U2.

A closer look.

Looking into the deep well finished reflector of the Predator G2 for a first look at the XP-G2 LED

And straight into the reflector

Looking a little closer the G2’s surface is more even than the XP-G with a lack of visible conductor strips.

Modes and User Interface:

The Predator’s user interface has two inputs. The first is the forward-clicky tail switch, and the second is the head being tightened or loosened.

With the head tightened you are using what ArmyTek refer to as Line 1 modes.

With the head loose, you are using the Line2 modes.

Each ‘Line’ can have multiple output modes. By default Line 1 has three constant output levels (equivalent to say Max, Medium and Low), and Line 2 has one flashing and one constant (strobe and brighter of three ‘firefly’ modes).

To change mode within the ‘Line’ you are using, either loosen then tighten (or tighten then loosen if using Line 2) quickly to move to the next output mode in that ‘Line’.

As supplied, you can just start to use the Predator like this, and you don’t HAVE to do any programming to customise it……..but you can, so why not.

This is where the Predator really is outstanding. No other light I know of gives the user so much control. It can be quite daunting at first when you take a look at the instructions:

(click to open the full size version of each page)

You are able to set the:

Number of output levels for each ‘Line’
What each and every output level (constant and firefly, strobe, SOS or beacon) is within the ‘Line’ (Line 1 only uses constant and firefly outputs)
Line memorisation on or off
The output stabilisation for each ‘Line’ (Full, Semi or Step)
The power source type (2xCR123 or 2xRCR123 or 1x 18650 Li-ion or 1×18650 LiFePO4)
Reset to factory defaults or use custom presets.

Also included is a battery voltage check feature which will indicate the battery voltage with a set of flashes.

Now that is outstanding!

Initially I found consulting the full double sided A3 sheet of instructions a bit overwhelming when trying to make a few changes, so I put together a single side of A4 as a set of condensed programming notes:

(click to open the full size version)

This summarises the three main tasks:

Setting up the Line 1 modes output levels.
Using the main Setup menu to configure the majority of options.
Displaying the battery voltage

You will still need to consult the ArmyTek instructions for the detail and planning what you want to set up, but hopefully this condensed guide will help you actually carry out the programming.

So with all of this choice, the biggest problem is deciding how you want to customise it.

Batteries and output:

The Predator can run on2xCR123 or 2xRCR123 or 1x 18650 Li-ion or 1×18650 LiFePO4.

Although you can get away without bothering to change the power source in the menu, doing so optimises the Predator to work with the chosen power source (effectively changing the lower cut off voltage and therefore the low battery warning voltage). This allows you to safely use unprotected Li-ions as the Predator itself will prevent damage to the cell once the low voltage limit has been reached.

When set to 2xCR123 the Predator will run them down to 2V allowing you to get the most out of them.

Due to the terminal design, the Predator can use button or flat top cells. However I did come across one issue when trying to use AW’s 3100mAh cells.

AW’s 3100mAh cells have three raised dots on the negative terminal. When screwing the tail-cap on, the metal cap on the Predator’s negative terminal spring, catches on these dots and gets dragged sideways. As you can see here, the battery terminal has a groove scored into it when this happened.

Inside the tail-cap there is similar damage where the negative terminal cap dug in. When this happened the tail-cap switch was bypassed and the light came on without the switch being pressed.

This only happened due to the raised dots. The AWs are the only cells I have with this design feature, but unfortunately it means you cannot use them with the Predator.

Due to this, all testing was carried out with Fenix ARB-L2 18650 cells and CR123 primary cells.

To measure actual output, I built an integrating sphere. See here for more detail. The sensor registers visible light only (so Infra-Red and Ultra-Violet will not be measured).

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

Predator G2 using ARB-L2 I.S. measured ANSI output Lumens PWM frequency (Hz)
Military (default) High 497 0
Military (default) Medium 84 0
Military (default) Low 5 0

(High on CR123 was 487lm)

All output modes are free of any sign of PWM.

Predator X using ARB-L2 I.S. measured ANSI output Lumens PWM frequency (Hz)
Military (default) High 593 0
Military (default) Medium 84 0
Military (default) Low 3 0

(High on CR123 was 586lm)

As mentioned previously the Predator uses three different types of output stabilisation (see the instructions for more details), including FULL stabilisation which maintains the specified output level without dropping at all until the battery can no longer maintain that output.

The default configuration is for the Line 1 modes to be run as FULL stabilisation, so this is how I tested the maximum output runtime test.

First up is the G2. At the end of the runtime, the trace becomes noisy – at this point the Predator started to flash to indicate the battery was low. The low battery flash continued for over half an hour giving you light you could find your way about with. Switching off and on in Line 1 resulted in no output. Changing to Line 2 while off did allow further use on firefly modes.

Next is the Predator X. Again at the end of the runtime, the trace becomes noisy – at this point the Predator started to flash to indicate the battery was low. The low battery flash continued for over half an hour giving you light you could find your way about with. Switching off and on in Line 1 resulted in no output. Changing to Line 2 while off did allow further use on firefly modes.

Another aspect of the Predator’s output that must not be looked over are the excellent ‘firefly’ modes. At a specified 0.1lm, 0.5lm and 1.5lm these are too low for my integrating sphere to measure. Bearing in mind that ArmyTek have specified their outputs as at the LED, the real output of these firefly modes is probably even less.

On the lowest mode, looking straight into the G2 shows the emitter’s surface structure.

The Predator X goes even lower

As I can’t measure these low outputs, here are the two Predators next to two other well known low output lights.

Far left is the Quark AA on moon mode, then the Predator G2, Predator X and the Photon Freedom Micro all on their lowest modes.

Interestingly the Predator X’s lowest output appears to be about half that of the G2 version. Both are significantly lower than the Quark Moon mode and the Predator X is not far off the Photon Freedom Micro which is one of the lowest outputs out there (but the Photon achieves this with a terrible PWM whereas the Predator’s output has no PWM).

In The Lab

NEW for Winter 2012 ANSI standards include maximum beam range. This is the distance at which the intensity of light from an emitter falls to 0.25lux (roughly the same as the lux from a full moon). This standard refers only to the peak beam range (a one dimensional quantity), so I am expanding on this and applying the same methodology across the entire width of the beam. From this data it is possible to plot a two-dimensional ‘beam range profile’ diagram which represents the shape of the illuminated area.

In order to accurately capture this information a test rig was constructed which allows a lux meter to be positioned 1m from the lens and a series of readings to be taken at various angles out from the centre line of the beam. As the rig defines a quadrant of a circle with a radius of 1m, all the readings are taken 1m from the lens, so measuring the true spherical light intensity. The rig was designed to minimise its influence on the readings with baffles added to shield the lux meter from possible reflections off the support members.

The distance of 1m was chosen as at this distance 1lux = 1 candela and the maximum beam range is then calculated as the SQRT(Candela/0.25) for each angle of emission.

In this plot, the calculated ANSI beam ranges are plotted as if viewed from above (for some lights there may also be a side view produced) using a CAD package to give the precise ‘shape’ of the beam.

Starting with the 5m range grid, the G2’s beam profile.

And the Predator X’s on the 5m range grid. Although the spill of the G2 is specified as 5º hotspot and 24º spill and the Predator X with 8º hotspot and 55º spill, although the Predator X does have a stronger spill, the difference is not as obvious as it is in the beamshots.

However zooming out to the 50m grid shows a bigger difference with the G2 being a strong thrower.

And the Predator X having a generally wider beam up to 150m (with the broader spill using up the extra output of the Predator X).

The beam

The G2 version’s beam is very smooth with a very even and round hotspot

Underexposing the beam shot shows the very bright and round small hotspot

The outdoor beam shot confirms how good the throw of the Predator G2 is.

The Predator X’s beam has a much brighter spill and much wider hotspot.

The difference between the Predator X and G2 version being even more obvious outdoors (same exposure setting as the G2)

What it is really like to use…

The older Predator V1.2’s tail switch was always a bit stiff to operate. It is nice to see that ArmyTek have addressed this with the new Predator V2.0 as the switch requires much less force to operate.

The holster supplied is designed for bezel down carry, and is a ‘gentle fit’ as the elasticated side panels hold the Predator gently while allowing very easy insertion and removal.

You can use it straight out of the box, but knowing what the Predator is capable of I programmed the G2 version with:

Line 1 – as default Military mode
Line 2 – 0.1lm, 0.5lm, 1.5lm, beacon, strobe (with auto memorisation)

And the Predator X as:

Line 1 – as default Military mode
Line 2 – 0.1lm, 0.5lm, 1.5lm
(in this configuration Line 2 (loose) will always give a firefly mode and Line 1 (tight) a brighter mode, so just make sure it is loose and it will be on a firefly output)

….these are my preferences, at least for now…

The Predator G2 is one of the best throwers I have used, not in absolute range, but in the fantastic beam quality and a very good range. At longer distances where the spill fades away, the Predator G2 projects a perfect disc of light, like a spotlight, allowing you to scan areas a long way away.

The Predator X provides a more even spread of light so has a smaller overall range but lights up a wider area. This is better for closer and indoor use than the G2.

Both beam profiles are excellent, and it is difficult to pick a favourite as the G2 has better throw, but the X has the lower firefly output and higher maximum output. I sense a CPF resolution to the problem of deciding – simply get both.

The new tactical grip ring feels really comfortable, much more so than metal grip rings, and with my XL hands (well that is my glove size) the Predator is a good fit in my hand. The softer touch tail switch with forward clicky action makes for easy, silent momentary use, and coupled with the ultra-low output levels is perfect for night time forays.

I’ve kept the default full stabilisation on Line 1 as the totally consistent output regardless of the state of the battery is excellent. The low battery warning means you are not plunged into darkness even when using full stabilisation, and as the two ‘Lines’ can be set with different stabilisation modes you could easily program the same output levels in each ‘Line’ but with different stabilisation – one for times when maximum performance is needed and one for when extended runtime is preferred.

For an idea of the size of the Predator V2.0 compared to other 1×18650/2xCR123 lights, here they are shown with (from the left to right) the FOURSEVENS Maelstrom X7, Fenix TK15 and Fenix TK22. It is the size of the excellent quality reflector that makes the Predator slightly longer and it is this reflector that gives the Predator such a great beam.

I still feel slightly restless about whether I have the Predator G2 and X set up just as I want them. With so many options it makes you wonder. But of course the joy is that you can change the configuration any time you like. The only slight issue being that you need to plan this as you really need the instructions in front of you for reference if you are going to make a change (it is not something I would do out in the field).

The build quality, beam quality and extensive features and customisation options really do make this an outstanding light, and genuinely one of my all-time favourites. The Predator is a light you’ll make up any excuse to use it ‘just for the sake of using it’, well I do.

Test samples provided by ArmyTek for review.

Light Review: Nextorch TA15, TA30 and Tactical Ring FR-1

22 October, 2018

Nextorch have always seemed happy to be a bit different, which is great for us as we get products that are innovative and unusual. This review is of the Nextorch TA15 and TA30 plus the Nextorch FR-1 Tactical Grip Ring. The TA15 supports several different battery types and sizes, and along with the more powerful TA30, has Nextorch’s dual-function tail-cap with magnetic control ring and two-stage button.

The TA15, TA30 and FR-1 as they arrived.

Taking a more detailed look at the FR-1:

With so much to look at, each model has a gallery of its own. This first one is of the FR-1 Tactical Grip Ring.


 

Taking a more detailed look at the TA15:

Next we take a look at the multi-power option TA15.


 

Taking a more detailed look at the TA30:

The slightly larger and more powerful TA30 is the last of the models we are looking at here.


 

The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and my wife won’t have one!

The main feature to note is that the bezel contours where the nano-ceramic glass-breaker balls are fitted do cut into the outer spill of these lights; most obviously on the indoor beamshots.


 

Modes and User Interface:

In previous reviews I have detailed the actual UI, but with the ease of access to user manuals, this section will now only include observations or differences in the operation.

In the process of tightening the tail-cap you also turn the magnetic control ring to the ‘Tac’ position. ‘Tac’ mode is actually ‘Off’ but you have direct access to maximum output from the tail-cap button switch (and Strobe from the second-stage of this switch).

This also means that to change modes using the control ring you are rotating it as if unscrewing the tail-cap. Being used to twisty interfaces where you tighten the tail-cap to turn on and then go brighter this has been counterintuitive for me, and I still find myself twisting it the wrong way when wanting to turn the lower modes off or down.

Unfortunately I can’t see any way round this, as it is completely right that when tightening the tail-cap (after replacing the battery) you want the control ring to be returned to the ‘off / Tac’ position; you just have to try and get used to this.

It also means that when taking the tail-cap off to replace the battery, you generally end up gripping the control ring and twisting this (especially with the FR-1 fitted), so turn the TA15 and TA30 onto maximum or strobe until the tail-cap is loosened enough to lock it out.

Batteries and output:

The TA15 runs on 14500, 16340, CR123, AA and though not officially, it can run on AAA.
The TA30 runs on 18650 or CR123.

To measure actual output, I built an integrating sphere. See here for more detail. The sensor registers visible light only (so Infra-Red and Ultra-Violet will not be measured).

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

         Nextorch TA..         |   I.S. measured    |  PWM frequency or    
     using specified cell      | ANSI output Lumens | Strobe frequency (Hz)
_______________________________|____________________|______________________
    TA15 - 14500 - Tactical    |        547         |                      
    TA15 - 14500 - III         |        542         |                      
    TA15 - 14500 - II          |        202         |      15600           
    TA15 - 14500 - I           |        32          |      15600           
    TA15 - 14500 - Strobe      |                    |      10.4            
                               |                    |                      
    TA15 - CR123 - Tactical    |        313         |                      
    TA15 - CR123 - III         |        310         |                      
    TA15 - CR123 - II          |        79          |      15600           
    TA15 - CR123 - I           |        11          |      15600           
    TA15 - CR123 - Strobe      |                    |      10.4            
                               |                    |                      
    TA15 - AA    - Tactical    |        120         |                      
    TA15 - AA    - III         |        118         |                      
    TA15 - AA    - II          |        23          |      15600           
    TA15 - AA    - I           |        4           |      15600           
    TA15 - AA    - Strobe      |                    |      10.4            
                               |                    |                      
    TA30 - 18650 - Tactical    |        849         |                      
    TA30 - 18650 - III         |        837         |                      
    TA30 - 18650 - II          |        151         |      15600           
    TA30 - 18650 - I           |        32          |      15600           
    TA30 - 18650 - Strobe      |                    |      10.4            
                               |                    |                      
    TA30 - CR123 - Tactical    |        756         |                      
    TA30 - CR123 - III         |        756         |                      
    TA30 - CR123 - II          |        153         |      15600           
    TA30 - CR123 - I           |        28          |      15600           
    TA30 - CR123 - Strobe      |                    |      10.4

 

* Beacon and Strobe output measurements are only estimates as the brief flashes make it difficult to capture the actual output value.

There is parasitic drain which is different for each cell type used. For the:

TA15 when using 14500, the drain was 11.6uA (8.85 years to drain the cells)
TA15 when using CR123, the drain was 9.2uA (17.36 years to drain the cells)
TA15 when using AA, the drain was 58.6uA (3.7 years to drain the cells)
TA30 when using 18650, the drain was 16uA (18.54 years to drain the cells)
TA15 when using CR123, the drain was 32uA (4.99 years to drain the cells)

The runtime graphs show the full traces, and a zoomed in section of the first few minutes of the run.


 

Troubleshooting

This section is included to mention any minor niggles I come across during testing, in case the information helps anyone else.

No issues were encountered during testing.

As per the description of this section, this information is provided in case anyone else finds a similar ‘issue’ that might be fixed in the same way.

The TA15, TA30 and FR-1 in use

Starting with the FR-1, though described as being suitable for any standard size light (with tail cap of 23.2 mm to 25.5 mm diameter), as yet, I’ve not found any it works with beyond the TA15 and TA30. The tail-cap needs to be bigger than the battery tube, but for most of the lights I have, the tail-cap and battery tube are the same size. It does however work very well with the TA30.

When using the FR-1 and TA30, the FR-1 covers most of the tail-cap, and this means that to loosen or tighten the tail-cap, you have to hold the control ring switch and turn that. It also means that the control ring switch is not as easy to hold as the collar of the FR-1 reduces access to it slightly. Of course it does not reduce access to the tail-cap button switch.

Tactical grip rings do add bulk to a light, but they also give you so many grip options, which is why they are worth their weight in gold. From the simplest concept, that you can hang the light off a finger and actually free up that hand entirely to hold or lift something without putting the light down (think of it like wearing a ring with a very large stone in it). How you now hold it is only limited by your imagination.


 

Having got to grips with these lights, I am very impressed with the interface. Combining the rotary control ring with the two-stage tail-cap button has worked really well. From any mode, or off/Tac, pressing the button gives you direct access to maximum output. The two stage button switch has a good feel, being neither too stiff or easy to press, making the division between the half press for maximum output and full press for strobe well defined. Snatch the button and you will likely get some strobe, so if this is a big issue you’ll need to go for a single mode light.

Changing from pressing the button to rotating the control ring is natural. However, as explained earlier, the direction of rotation to change modes wasn’t intuitive for me, and I need to think about it.


(The TA15 with Nextorch’s new V30 EDC bag)

I like versatility; the TA15 gives you that, and is especially good as a light to have as a backup where you might need to scavenge cells from anywhere. The output does depend on the cells you fit, but this is not only sensible, as it better matches the output to the cells capacity (so not depleting them too fast) but it also lets the user choose their preferred output levels. I prefer lower output levels, so I generally run it on AAs. It really is very useful to be able to feed it such a varied diet, but you can end up with some cell rattle (mainly CR123) due to the mechanism needing to cater for the different cell lengths.

A minor point, which I raised with Nextorch, was that if using NiMh cells, the TA15 will often not switch from off to level 1, but needs to be turned onto level 2 then back to level 1. This behaviour seemed odd and only happened on NiMh AAs, but Nextorch explained that due to the low voltage, the TA15 was automatically going into a sleep mode to reduce drain to a minimum, and would only wake up when turned onto level 2. So this behaviour is designed into the TA15, and is specifically intended to reduce drain.

The TA15 and TA30 use the exact same interface and are in fact almost the same size. They handle very well and are extremely functional.

Still looking for an opportunity to try out the glass breakers…

Review Summary

_______________________________________________
Things I like
_______________________________________________
Two-stage tail-cap button.
Rotary control ring.
Multi-cell-type compatibility.
Ceramic glass breakers.
Very useful tactical grip ring.
Supplied cells are USB rechargeable.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Cell rattle with CR123.
The direction of rotation of the control ring has been counter intuitive.
Outer spill beam broken up by glass breaker bezel.

 

Discussing the Review:

The ideal place to discuss this reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in, or start, a discussion.

CandlePowerForums – Flashlight Reviews Section (Largest and Friendliest Flashlight Community Forum)

EDC Gear Review: Wiley X Sunglasses – Hayden, Kobe, Wave (EN.166 Safety)

29 August, 2018

Wiley X continue to innovate, and this Wiley X sunglasses review includes the new ‘Hayden’ which combines the timeless metal framed aviator style with high ratings of eye protection previously not possible with this style. Along with the more conventional ‘Kobe’ this group review shows the ‘Wave’ with its facial cavity seal system providing goggle like protection with sunglasses style.

A little Background:

For those that have not read one of Tactical Reviews articles on sunglasses, I just wanted to add a little explanation as to why the performance of sunglasses is crucial to me, every day, not just in the summer or on sunny days.

Due to having hyper-sensitivity to light, I wear sunglasses 100% of the time during daylight hours when I’m outside or driving, so get a lot of wearing time. I would never consider having only one pair of sunglasses and have many different types and styles. (I’m also a lens quality perfectionist)

Being a shooter, I also only settle for full protection when it comes to my eyes. This requires a good fit, a choice of lenses and of course the appropriate safety standards.

A few more details:

The three models on test here all offer something a bit different. Each has its own gallery to take you around the design and highlight features. The Wave has a further gallery in the next section to show the facial cavity seal in more detail.

Starting with the metal framed Hayden which has Polarized lenses.

 

Next we have the Kobe which has standard non-polarized lenses.

 

Last of the three is the Wave. In this gallery we focus on the overall look and details, but as it has the facial cavity seal feature, this has been put into a gallery of its own.

What it is like to use?

I’ll start with a word – Safety. Let’s get this out of the way, but not dismiss it. Wiley X glasses easily surpass the safety standards designed to ensure standard safety glasses will protect you. The exact standard surpassed does depend on the model, and some have higher ratings, but all are at least EN.166 rated, so you know if you have a pair of Wiley X glasses on, you are protected.

A crucial factor for comfort and performance is fit, and with Wiley X there are models to suit all face sizes, so you might find you need to choose a different one to the models shown here to get the sizing right for you.

Here are the Hayden, Kobe and Wave being worn.

 
HAYDEN: Having made the switch to wearing protective glasses at all times, I have been missing my metal frames, so the Hayden is a seriously welcome addition. Being highly light sensitive, I am aware that there is less protection from light coming directly from the side as the thinner arm doesn’t block the light like a thicker plastic arm. A minor point, but might dictate which day I choose to use them.

As delivered I found the Hayden’s nose pads excessively close together, more so than any other glasses I’ve ever tried. Having a couple of specialised pliers I was happy to adjust the nose pieces myself, but most people might want to pop into an opticians and get them to help; even though I’ve done it before, it still worries me having to bend the metal nose pad holders.

The spring arms make for a very comfortable fit. You might notice from the photos the precise fit of the parts of these spring hinges. So tight and precise, they have nipped me a few times (hair and skin) when taking them on and off and flexing them both ways.

However, otherwise, once the nose pads have been set correctly, the Hayden is light, comfortable and the polarized lenses are excellent performers. Very impressed with these.

KOBE: These are the quiet but efficient ones in the group. No ‘special features’, but just doing the job. They are very lightweight and have an efficient ergonomic shape, a bit of a ‘fit and forget’ you are wearing them. The arm width is sufficient to block light from the side along with the fact they have a wrap around shape in the first place.

WAVE: A key feature of the Wave is its Facial Cavity Seal which also appears on several other models. This feature provides a very specific function; when you first put on a model with the Facial Cavity Seal they feel more like goggles than glasses and it can take a little while to get used to. However as you get used to it, the feeling becomes more comforting and the benefits can be very obvious. The Facial Cavity Seal is designed to protect you from wind, fine dust and pollen as well as blocking light that normally leaks in around the edges of sunglasses.

A more detailed look at the Wave’s facial cavity seal.

 

I’ve found that in situations where I would want to wear a peaked hat, the Facial Cavity Seal provides sufficient protection from light that would normally leak in around the frame and I didn’t need the hat.
Where the Facial Cavity Seal really shines is in wind and dust protection. Though normal sunglasses provide a degree of protection from wind, once it is coming from the side this is far less effective. Add in dust and your normal sunglasses are not much use. The Facial Cavity Seal immediately shields you from this and stops the blinking and squinting. You could use actual goggles, but Wiley X’s Facial Cavity Seal gives you the protection of goggles in a pair of sunglasses, and the included head strap keeps them firmly in place.
You also have the option of removing the seal and using the sunglasses as normal sunglasses. This is crucial as they do come with some of the issues of goggles.
Although the Facial Cavity Seal has some venting built in, yes, just like goggles you do get fogging. I found that this was particularly bad when driving (due to the lack of airflow), and other situations where I was hot and there was little or no airflow.
When it is windy, the small vents seem to cope with preventing fogging very well, but once conditions are calm, you are at the mercy of the temperature of the sunglasses and your immediate humidity (a nice way of describing the body’s output of moisture).
Knowing that when using the Facial Cavity Seal you can get fogging is just something you need to work with. When the situation demands the extra protection, the Wave delivers exactly that.
Remember though, that unlike goggles, you can remove the seal and they become normal sunglasses.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that already described.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

         Things I like             |        What doesn't work          
                                   |         so well for me            
 __________________________________|___________________________________
 All - EN.166 Safety or above.     |                                   
 All - Comfortable and lightweight |                                   
 All - Case, strap and cloth       |                                   
 included.                         |                                   
 Hayden - Metal Frames.            | Hayden - the hinges can pinch.    
 Kobe - Simple and reliable.       |                                   
 Wave - Removable Facial cavity    | Wave - FCS can cause fogging.     
 seal (FCS).                       |                                   
                                   |

 

CLASSIC Gear Review: 5.11 Tactical RUSH 12 and 24 Backpack (MOLLE/PALS compatible)

15 August, 2018

This review of the 5.11 Tactical RUSH 12 and 24 backpacks is a classic from 2013, and is the first in the Classic Series of reviews to be published on Tactical Reviews. The original versions of the Classic Series Reviews used a well known image host who will be cutting off the visiblity of 3rd party hosted images at the end of 2018.

For this review I am testing and comparing two of 5.11’s tactical MOLLE backpacks (well PALS really – but we’ll come back to that), the RUSH 12 and RUSH 24.

These two sizes cover the requirements of the average every-day-user for day trips, commuting, camping, hunting etc. Of course the expandability afforded by the integrated PALS system makes these backpacks all the more versatile.

The model suffix, 12 or 24, of these RUSH backpacks indicates the number of hours you are carrying provisions for, so the RUSH 12 should carry the items you need for a 12 hour outing, and the RUSH 24 covering your needs for a 24 hours out and about. These are reasonable guidelines, especially considering the expandability of the packs and options to add MOLLE/PALS system pouches and tie on other gear.

I have previously looked at a couple of lights from 5.11 Tactical, the ATAC A1 and A2 (1 AA and 2 AA versions) and
ATAC L2 (2xCR123/RCR123), which proved to be great quality and very reliable, and backpacks look like they will live up to the same standards.

Initial Impressions:

‘Quality’, ‘solid build’ and ‘feature packed’ are the over-riding impressions that come to mind when you first get hold of the RUSH 12 and 24. This is certainly reinforced by the weight of the empty bags, roughly double the weight of an average rucksack. However the reasons for this extra weight are the heavy duty materials and construction used to make these along with the designs being packed with useful functional features.

Side by side:

The more I’ve used these two backpacks, the more I appreciate how much thought has gone into their design. Before I delve deeper into the design features of each of them, I wanted to start with a quick look round the RUSH 12 and 24 side-by-side to give an idea of how they compare.

On the left is the RUSH 12 in Sandstone (328) and on the right is the RUSH 24 in Flat Dark Earth (131). For colour comparison, the photo was taken in daylight with the camera set to daylight white balance.

The size difference is clear with the RUSH 12 having a capacity of 21.2 litres and the RUSH24 32.7 litres, so the RUSH 12 is has about 2/3 the capacity of the RUSH 24. The main compartment of the RUSH 12 is 45.7cm tall with the RUSH 24 being 50.8cm tall, and the RUSH 12 is 27.9cm wide compared to the RUSH 24 at 31.8cm wide.

The side view shows extra depth of the RUSH24 which has about 5cm deeper.

The straps are in proportion to the overall backpack dimensions, so the RUSH 12 will suit the smaller framed individual.

Comparing the schematics:

Each of the RUSH backpacks comes with a tag which has a helpful set of schematics which do not appear to be published on 5.11’s website. The schematics also provide an excellent comparison between the two sizes and their main features.

Weighing the empty bags, the RUSH 12 comes in at 1200g and the RUSH 24 at 1670g. This compares to a typical 30 litre rucksack at around 750g.

Looking closer at the RUSH 12’s schematics. The representation of the PALS/MOLLE webbing on these schematics give a good idea of the relative sizes of the RUSH 12 and 24.

With side view

And back view

Then the RUSH 24 and the schematic making it easy to compare layout and size.

Side view.

And back view.

The RUSH 12 in detail:

As each of these RUSH backpacks is packed with so many features, I need to take a closer look at each one separately. The RUSH 24 will be covered in the next section.

Even something as simple as the sternum strap has several special features.

The strap is attached using C-loops which allow it to be easily removed and repositioned higher or lower on the shoulder straps to suit your requirements.

The free end of the length adjustment strap is held neatly by an elasticated keeper, and the strap itself has an elasticated section to provide some give for extra comfort.

Both RUSH backpacks have Dura-flex side release buckles incorporated into the shoulder straps. This simple design feature provides two major benefits most other packs are missing. Firstly, in general use, this makes removing a heavy pack much easier. Simply unclip one strap (or both), and then swing the pack off the other shoulder without having to struggle to get your arm out of the strap. Secondly, as the pack is covered in lashing points and PALS webbing, it has lots of possible points to get hung-up on obstacles. The side-release clips in the straps allow for an instant release from the pack if you ever get caught up on anything.

5.11 mention the Dura-flex hardware in the straps, but don’t seem to highlight this fantastic feature.

Also visible is a plain buckle that allows a hip belt to be attached.

In the base of the pack there are two drainage holes, and this most recent version of the RUSH 12 includes four lashing points on the bottom.

Folding the shoulder straps over the main pack reveals the hydration pocket zip.

A hydration bladder can be fitted and secured using the two toggles or suspension strap. The drinking tube is then fed through the top of this pocket and into the main compartment.

From the main compartment the drinking tube can be fed out of either port (one each side of the grab handle), before being routed under the webbing on the shoulder straps.

Inside the hydration bladder pocket, the back support padding and reinforcement can be accessed and removed if desired.

The padded back of the pack has two textured grip pads to help prevent the pack moving in use and between these is the drainage hole for the hydration pocket.

Just next to the grab handle is a small fleece lined zip pocket perfect for sunglasses or small electronic devices that you want to find quickly.

The pocket is pulled inside out here to show the lining and depth.

Each side of the pack has a compression strap with elastic keeper to tidy the loose end, and a series of PALS webbing provides mounting options. The RUSH 12 is constructed of durable water-resistant 1050-denier nylon.

As well as more PALS webbing the front of the pack has a Velcro panels for a name patch and flag.

These Velcro panels allow you to personalise your pack.

At the top of the front panel there is a simple single compartment.

Below this is the main admin panel which has a further zip compartment and several organiser pockets.

Also incorporated are a couple of key keepers

Unlike most backpacks, the RUSH backpacks feature full clamshell opening of the main compartment. The back of the front panel has two mesh compartments and the main compartment includes a large pocket with bungee clinch top.

Keeping things secure:

Before moving onto the detailed look at the RUSH 24, there is a feature common to both RUSH 12 and 24 worth noting.

All zips are self-repairing YKK zips which have large glove friendly tags. These type of tags allow you to secure the zips together to prevent the pack opening unexpectedly.

Doing this is simple once you are used to it and well worth doing. Hopefully this series of photos will explain.

First feed one tag (A) through the other (B).

Then feed B though A

Pulling B far enough through that you can…

…then pass A back through it

Finally pulling tight.

Using this method of passing one tag through the other again and again allows you to secure the compartments from accidental opening without any other hardware.

The RUSH 24 in detail:

Having already covered the RUSH 12 in detail, may of the same features can be seen on the RUSH 24, plus a few more.

The sternum strap is attached with C-loops and has an elasticated keeper, and the strap itself having an elasticated section to provide extra comfort.

Dura-flex side release buckles are incorporated into the shoulder straps allowing the shoulder straps to be opened for easy removal of the pack, or an instant release from the pack if you ever get caught up on anything.

Also visible is a plain buckle that allows a hip belt to be attached.

In the base of the pack there are two drainage holes, and this most recent version of the RUSH 24 includes four lashing points on the bottom.

Folding the shoulder straps over the main pack provides easy access to the hydration pocket. The padded back of the pack has two textured grip pads to help prevent the pack moving in use and between these is the drainage hole for the hydration pocket.

A hydration bladder can be fitted and secured using the two toggles or suspension strap. The drinking tube is then fed through the top of this pocket and into the main compartment.

From the main compartment the drinking tube can be fed out of either port (one each side of the grab handle), before being routed under the webbing on the shoulder straps.

The grab handle is very strong and stitched firmly to the top of the bag.

Inside the hydration bladder pocket, the back support padding and reinforcement can be accessed and removed if desired.

Just like the RUSH 12, next to the grab handle is a small fleece lined zip pocket perfect for sunglasses or small electronic devices that you want to find quickly. Here the pocket is pulled inside out here to show the lining and depth.

The shoulder straps have a yolk system to spread the load, and densely padded straps to make carrying even heavy loads comfortable.

Each side of the pack has a compression strap with elastic keeper to tidy the loose end, and a series of PALS webbing provides mounting options. The RUSH 24 is constructed of durable water-resistant 1050-denier nylon.

The RUSH 24 also has a side pocket (which the RUSH 12 does not).

As well as more PALS webbing the front of the pack has a Velcro panels for a name patch and flag allowing you to personalise your pack.

Instead of the simple single compartment of the RUSH 12, the RUSH 24 has a double sided compartment (here one side is shown open) where each side has a fleece lined pocket and a zip up mesh pocket. This gives three separated storage areas on each side of this top section.

The large admin panel includes a further zip closed pocket and multiple sections and two key keepers for organising the contents.

Inside the main compartment (with full clamshell opening), the RUSH 24 has two more compartments than the RUSH12. On the back of the front flap there are two mesh compartments and a further zip pouch below these. The main compartment includes a large stuff-pocket with bungee clinch top and above this another mesh zip closed compartment.

MOLLE/PALS and what this means for the user

Already highly featured backpacks, the RUSH 12 and 24 are expandable thanks to the incorporated PALS webbing.

Most people are familiar with the more commonly known MOLLE (pronounced Molly) system used by armed forces around the world.

MOLLE stands for MOdular Lightweight Load-carrying Equipment, and refers to the entire system made up of many components.

Part of the MOLLE system is PALS which stands for Pouch Attachment Ladder System, and takes the form of the 1” webbing you see on ‘MOLLE compatible’ gear. The webbing straps are fitted with 1” spaces between them and stitched on at 1.5” intervals to provide a flexible attachment framework.

Most of the time I’ve been using the RUSH 12 and 24 in their basic form, tending to use the PALS webbing to attach items using karabiners or lashing them on, but have also tried them out with a variety of pouches attached.

Here the RUSH 12 has a small pouch (British Army issue) fitted to the side panel. This has now been replaced by a larger utility pouch.

On the RUSH 24 a small utility pouch has been fitted to the front panel.

The best aspect of this feature is its flexibility. If one pouch configuration isn’t working for you, take them off and rearrange them until you find one that works.

What are they really like to use…

Since prehistoric times, the backpack has been the fundamental load carrier for most activities, and a good one can make all the difference.

Both the RUSH 12 and 24 have been improved on from their first versions, based on real user feedback, so are now a mature design, and this is obvious when you use them.

Of the two, the RUSH 12 is the one I grab for most frequently for general day trips. I’ve moved the small pouch from the side onto the left hand shoulder strap and a larger utility pouch onto the left side. The right hand strap has a polymer karabiner for hooking on a compact camera, and if it’s dark, a torch like the Sidewinder shown here is often added.

All the small touches, like the elastic keepers for tidying up all the strap ends, the well laid out pockets, and compartments, and the fully organised admin panel make it easy to locate all the bits and bobs that always seemed elude me and take ages to find when using standard backpacks. Everything is to hand and organised.

The side-release buckles in the shoulder straps now seem to me an essential feature. Why don’t all backpacks have them? With these, there is no more struggling to take a pack off, and instant release to get unloaded or escape the pack in an emergency is straight forward.

On a recent trip, the RUSH 24 was carefully packed to keep within the airline’s specified dimensions (56x45x25cm). If filled to capacity the 25cm limit could be exceeded, so the contents needed to be arranged neatly. This was made very easy thanks to its clamshell opening, and it then came with me as cabin baggage. In this instance the RUSH 24 was loaded with 10Kg of equipment which almost disappeared once on my back. All the pockets and compartments kept various documents and passes close at hand and perfectly organised.

Even going through security became a breeze as my pockets simply transferred to the various compartments around the RUSH 24. Onto the conveyor for scanning and the clamshell lets me take out the laptop and liquids in a flash, and back in again after the scan.

The only time I noticed the weight of the pack was when I had to use the grab handle or when putting it into the overhead lockers.

Once you’ve tried a RUSH backpack, you won’t want to go back to anything else. If you are in the market for a backpack, the RUSH might seem quite expensive, but just look back over the features crammed into each version. All those pockets, compartments, straps, buckles and PALS webbing don’t come for nothing and in the RUSH 12 and 24 (and presumably the 72 as well) have been put together in a robust package with quality materials. You certainly get what you pay for.

These RUSH backpacks will be trusted companions on many adventures to come, and many more mundane trips as well.

Test samples provided by 5.11 Tactical for review.

Light Review: ACEBEAM UC15 – EDC / Keychain

24 July, 2018

ACEBEAM’s UC15 is a new contender in the keychain light market. The UC15 has a range of capabilities that make it stand out, with white, red and UV beams, and the choice of AAA or 10440 for power. We are certainly spoilt for choice when it comes to keychain lights, in many cases with there being very little to distinguish between them, but the UC15 definitely gives you more. It is one of the larger keychain lights, being in the ‘car key size’ class, many of which have built-in batteries and though those have the convenience of USB charging, they are limited by the capacity of that battery. Not the UC15 as it takes 2x AAA or 2x 10440, but can run on only one cell if needed.

Taking a more detailed look:

The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and the wife won’t have one!

Modes and User Interface:

ACEBEAM helpfully provided a diagram to help you navigate the UC15’s UI. However, the current firmware version doesn’t quite follow this diagram once you have activated the ‘colour group’.
On one copy of the UI diagram I have made a couple of adjustments, and the reason for these is as follows…
Turning on to Moon mode does NOT ‘activate’ the white group when the current group is the colour group; it only temporarily enters the white group. So, if the colour group was the active group and you turn on to Moon mode, even if you then select another white output level, once you turn the UC15 off, it will revert to the colour group.
From OFF, with the colour group active, the only way to ‘activate’ the white group is via a double click.
If the colour group is active, and the UC15 is OFF, a double click does NOT turn Turbo on, instead it turns on the memorised white level; it then takes one more double click to enter Turbo.

Batteries and output:

The UC15 runs on 2x AAA or for maximum output 2x 10440. These are used in parallel, so you can actually use only a single cell if that is all you have.

To measure actual output, I built an integrating sphere. See here for more detail. The sensor registers visible light only (so Infra-Red and Ultra-Violet will not be measured).

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

         ACEBEAM UC15          |   I.S. measured    |  PWM frequency or    
     using specified cell      | ANSI output Lumens | Strobe frequency (Hz)
_______________________________|____________________|______________________
  Turbo  10440                 |      679           |                      
  High   10440                 |      441           |                      
  Medium 10440                 |      251           |                      
  Low    10440                 |      109           |                      
  Moon   10440                 |        5           |                      
  Red    10440                 |       93           |                      
                               |                    |                      
  Turbo  AAA NiMh              |      190           |                      
  High   AAA NiMh              |       93           |                      
  Medium AAA NiMh              |       51           |                      
  Low    AAA NiMh              |       25           |                      
  Moon   AAA NiMh              |        5           |                      
  Red    AAA NiMh              |       53           |

 

There is parasitic drain but is incredibly low. When using 10440, the drain was 3.6uA (22 years to drain the cells), and when using AAA, the drain was 1.1uA (165 years to drain the cells).

The runtime graph shows the UC15 running from Turbo to the ANSI cut-off for AAA NiMh and 10440. Also included are the manufacturer output specifications.

Troubleshooting

This section is included to mention any minor niggles I come across during testing, in case the information helps anyone else.

The only minor observation to report here was difference in the expected behaviour of the UI, as noted earlier.

As per the description of this section, this information is provided in case anyone else finds a similar ‘issue’ that might be fixed in the same way.

The UC15 in use

Compared to many keychain lights, the UC15 is a fairly large addition to your key-ring, but it is packed with features and performance. This high CRI Nichia LED version doesn’t quite have the same 1000lm output as the XP-L version, but at around 700lm when using 10440, is very impressive.
Personally I find the levels a bit too bright when using 10440, and I prefer to use AAA, which brings the levels down to a brightness that works better for an EDC light. You have the choice though, a true pocket-rocket, or a seriously useful EDC light. The level chosen for ‘Moon’ mode is more like a low level than a moon mode as at 5lm is too bright for dark adapted eyes.
When it comes to red light, typically this is used to help maintain dark adapted vision. In the case of the UC15’s red output, it is very bright, with nearly 100lms of red when using 10440; this is too much. If you were to go to an astronomy ‘star party’, and broke out the UC15’s red beam, you would be asked to leave – immediately. With the red beam being a specific wavelength (630nm) it is virtually invisible to many night time quarry if you are out hunting after dark, so in this regard is useful. Beyond that, the red could be useful for signaling considering its brightness.
Unlike many ‘UV lights’ the UC15 is a proper UV light using the 365nm wavelength. This has minimal blue light and appears very dim to the eye, until you shine it onto materials that fluoresce. This is particularly obvious with bank note security features. Only true UV brings out their colours and makes them glow brightly.
Rated as IP54, I am slightly surprised that ACEBEAM have left the tail-cap without any kind of seal. It might be slightly splash proof, but it is not waterproof. Perhaps a keychain light is not that likely to get soaked (a car key might not like that), but it seems strange not to have a seal.
Adding the clip makes it more of a pocket light than a keychain light, but gives you that extra flexibility. With the clip open at the tail-end of the UC15, you can slide it onto the baseball cap peak to use it as a head-lamp. Fitting the clip itself is fiddly. The small screws don’t fit through the holes in the clip, so have to be tickled into position underneath the clip, and then tightened.
Overall the 2x AAA side-by-side configuration makes for a very ergonomic light to use, and with three different beams to choose from, the UC15 is a serious contender for your EDC.

Review Summary

_______________________________________________
Things I like
_______________________________________________
High CRI ~700lm output.
Choice of AAA or 10440 power.
Choice of output levels (based on cell choice).
White, Red and UV outputs.
Good UI (despite minor issue).
Can run on only one cell (as the two are used in parallel).
Very low parasitic drain.
No Pulse Width Modulation.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
‘Moon’ mode is too bright.
Moon mode not memorised.
Red output very bright.
Not waterproof, only water resistant.

 

Discussing the Review:

The ideal place to discuss this reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in, or start, a discussion.

CandlePowerForums – Flashlight Reviews Section (Largest and Friendliest Flashlight Community Forum)

Showcase: Spyderco Shaman – The knife that nearly passed me by

20 July, 2018

While the latest ‘stand-out’ designs compete for our attention, often it is the quiet ones you need to look out for, and for me, this is what the Spyderco Shaman is. I very nearly passed this by while at IWA 2018 as it is a plain looking knife with stonewashed blade and matt handle – nothing exciting. Well thanks to Joyce at Spyderco, I didn’t miss out on this fantastic knife that nearly flew under the radar. This is not just a bigger ‘Native’, it is much more than that.

Gallery:

A quick note before you dive into the gallery; look out for the excellent ergonomics – with the Shaman, Spyderco have rounded all the handle edges of the matt finish G-10 handles, and this makes for a completely different feel for the knife, almost getting on for the feeling of a fixed blade. The compression lock keeps the lock out of the way of the grip nicely, and the finger choil and thumb jimping give a super secure grip. This one just feels right in the hand and pocket.

BESS Certified sharpness testing:

Before we get to the photos, also included in this showcase are the results of the factory edge sharpness testing. These are impressive results; see the gallery for the certificates.

The BESS ‘C’ scale of sharpness, was developed by Mike Brubacher (Brubacher Edge Sharpness Scale).


 
The Shaman’s factory edge has an average BESS ‘C’ sharpness of 211. At this sharpness it easily and cleanly slices 80gsm copier paper, and will shave hair from your arm. Spyderco reliably supply very sharp factory edges, and this, though not the best, is at the sharpness I would aim to re-sharpen a knife to, so more than adequate.

Don’t let the Spyderco Shaman pass you by, it is much more knife than its unassuming looks might indicate.

 

Discussing the Showcase:

The ideal place to freely discuss these reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in, or start, a discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Performance Review: Emisar D4 – Quad Nichia 219C LED Light

12 July, 2018

The Emisar D4, made by Hank Wang of Intl-Outdoor, is one of those lights that has created such a stir with its stunning output levels, that if you haven’t come across it yet, you will do. Hank has created a light by which others will be judged and at an amazingly low price. Coming in several flavours of LED, with varying maximum output levels, the light on test here is the Neutral White 90CRI Nichia 219CT LED version. Also included with this review sample is the 18350 tube allowing it to be used with 18350 and 16340 cells.

Taking a more detailed look:

The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and the wife won’t have one!
 


 

Modes and User Interface:

From OFF:
1 Click – Turn ON to memorised level.
Press and Hold – Turn ON to minimum and Ramp up.
2 Clicks – Turn ON to Max output.
3 Clicks – Enter Voltage Battery Check (longer flash indicates a 1, short flash indicates a 0. Whole Volts first, then tenths).
From Voltage Battery Check 2 Clicks to enter Temperature Check (longer flash indicates a 1, short flash indicates a 0. Tens of Degrees C first, then Ones)
4 Clicks – Set to use Tactical (Max output) Momentary mode. 4 Clicks to cancel this mode.
6 Clicks – Lockout. 6 Clicks to cancel.
8 Clicks – Beacon Mode
10+ Clicks and hold – Thermal configuration. Hold the button until the D4 is as hot as you want it to get.
When ON press and hold to ramp up or down in output.

Batteries and output:

The Emisar D4 runs on several cell types depending on the battery tube you buy. In this case there is the 18650 tube and the 18350 which also allows a 16340 to be used. Only IMR cells should be used in this high performance light and a 20A output should be considered a minimum.

To measure actual output, I built an integrating sphere. See here for more detail. The sensor registers visible light only (so Infra-Red and Ultra-Violet will not be measured).

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

         Emisar D4             |   I.S. measured    |  PWM frequency or    
     using specified cell      | ANSI output Lumens | Strobe frequency (Hz)
_______________________________|____________________|______________________
18650 Max @ switch on NOT ANSI |     3082           |      16100           
18650 IMR Max                  |     1918           |      16100           
18350 Max @ switch on NOT ANSI |     2259           |      16100           
18350 IMR Max                  |     1700           |      16100           
16340 Max @ switch on NOT ANSI |     2029           |      16100           
16340 IMR Max                  |     1714           |      16100           
Moonlight                      |     <0.1           |

 

There is parasitic drain. When using 18650, the drain was 22.6uA (15.65 years to drain the cells). On Lockout, the drain was 25uA (14.15 years to drain the cells).

Below is the combined runtime graph for all the types of test carried out. It includes the D4 being run in its factory thermal configuration (45°C), and then the thermal configuration taken to the max. To set the thermal configuration as high as possible, it was set while wearing kelvar gloves (the bezel reached 80°C when setting this). Tests were carried out with fan cooling.
 

This gallery contains the other versions of the runtime graphs.

Review Summary

_______________________________________________
Things I like
_______________________________________________
3000lm+ Max Output.
Flexible UI.
Excellent Thermal regulation.

_______________________________________________
What doesn't work so well for me
_______________________________________________
Gets hot very fast due to lightweight construction.
Maximum output drops very quickly.

 

Discussing the Review:

The ideal place to discuss this reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in, or start, a discussion.

CandlePowerForums - Flashlight Reviews Section (Largest and Friendliest Flashlight Community Forum)

News: Sharpest Knife Competition at Knives UK 2018 – The Results

4 July, 2018

It Happened! The first ‘Sharpest Knife’ competition of its kind in a public access show in the Northern Hemisphere. Eyes were opened, hopes dashed, legends toppled, shock results revealed, and a winner who could not believe it! Drama and enlightenment added to a day of excitement at Knives UK 2018, with the vast array of beautifully hand crafted knives and tools, what more could you ask for?

Let the contest begin:

The Winner.

I was so busy I didn’t have time to get round all the Knives UK exhibitors, so this is a whistle-stop tour that does not do the show justice, merely giving a brief glimpse of it.

 
See Announcement: The ‘Sharpest Knife’ Competition at KnivesUK 2018 for more details.