Knife Review: Extrema Ratio Sethlans

Back when it was launched, I took a ‘first look’ at the Extrema Ratio Sethlans knife. Now, after being able to use the Sethlans for several months I can bring you this much more detailed look at the knife and its comprehensive equipped sheath.
The Sethlans is designed to be used for bushcraft, survival, and as a backup blade, so is also ideally suited for prepping, but I can tell you know, you are definitely going to want to use this knife.

The ‘First Look’ Video:
Taking you back to the initial impressions and overview of the Sethlans.


What’s in the box?:
Extrema Ratio knives always come in a nice robust presentation box.


A good look round the Sethlans Sheath – Things to look out for here are:

A good sheath can make or break a knife, as access to, and ease of carry, affect your experience of using the knife. The Sethlans has one of the most comprehensively equipped and well thought out sheaths of any knife I have used, and there are so many details to show, it is a major part of this review. The following gallery takes you through the construction, assembly methods and components of the sheath, including the sharpening stone pouch and fire-steel that come with the Sethlans.
This sheath can be fully disassembled and reassembled either as a left-handed setup (It comes as a right-handed setup), or stripped down to the very basics. You can run this sheath as just the Kydex sheath with no hanger, or the Kydex sheath with belt hanger/Molle mount. Super flexible design.


The Knife:
This gallery seems rather small after the sheath rundown. The Sethlans is a simple and elegant design that manages to incorporate the distinctive Extrema Ratio finger grip styling and take this feature yet further into the shaping of the actual tang within the grips where the metal is thinned down in the finger grip section of tang to mirror the grip shaping. Very nice touch.


The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.


What is it like to use?
Being an Extrema Ratio knife, the Sethlans seems to be both typically characteristic of the brand, yet at the same time completely different and surprising. It also has me in a dilemma about how to set it up thanks to the super flexible sheath design.
If I were packing in a ‘prepping’ style, I would leave the full Sethlans sheath setup with the sharpening stone and fire-steel, as like this you have all the bases covered. However as I am enjoying using this knife, and with the sheath pared down to the minimum, for me it is a much nicer every day carry. In this setup, I remove the pouch with sharpening stone, the fire-steel, and the handle retaining strap. This leaves the knife securely in the Kydex holder on a belt loop hanger.
The knife immediately feels at ease in the hand, comfortable, well balanced and agile. The grip is relatively slim for an Extrema Ratio knife, and this adds to the mobility and control for fine work.
Thanks to the thick full tang, the weight feels like it is in your hand, and the knife will just sit balanced on your first two fingers without trying to fall forwards.


The way the edge sweeps up towards the tip, gives you something similar to a chisel that you can use for nice controlled cuts by pushing down into whatever you are cutting. This same shape also works well as a skinner.
Areas of deep, wide and grippy jimping make for a very stable hold, and there is also the Extrema Ratio distinctive finger groove I have always loved.

Between the thumb jimping and swedge is a section of the blade spine that has been given a nice crisp edge, just right for scraping sparks off the big fire-steel. It does this very nicely indeed…


Fire-steels always make a mess that looks much worse than it is. The Sethlans cleans up perfectly after a fire lighting session, and the photo below, after a clean, left a knife looking as good a new. Use it!

Despite the significantly thick blade tang, the blade itself has a thickness of 3.9mm combined with a depth of 37.5mm, and this makes for a 5 degree primary bevel angle. The figures might be a bit of a yawn, but what it means is a blade that slices really well thanks to the small bevel angle – yet at a maximum thickness at the spine of nearly 4mm, is still a good strong blade without feeling heavy.

Extrema Ratio have put a lot of effort into the complex shaping of the blade, tang and handle fittings, and it shows. These design details make the Sethlans one of those knives you pick up and virtually forget about while using it, as the tool becomes an extension of your hand. You focus on the job, not the tool.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

The Kydex sheath has a bit of side to side play due to the strap layout.
Reconfiguring for left-handed use requires full disassembly of straps and sheath bolts.

_______________________________________________
Things I like
_______________________________________________

Excellent balance of the knife.
Comprehensively equipped sheath.
Sheath can be reconfigured for left-handed use.
Modular sheath allows user to choose favourite setup.
Very good handling and grip.
Strong but slicey blade profile.
Easily strikes showers of sparks from a fire-steel.
Compact package.
Secure blade retention, yet easy to remove using thumb pressure.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Knife Review: Fällkniven U1c slip-joint

For me, Fällkniven‘s U1 pocket knife has been flying under the radar. You might think it is not the most exciting knife, a small slip-joint with simple build, but then again perhaps it is….
Now that I’ve been living with and using this knife for an extended period, I have found it is one of those no-nonsense practical every-day-use knives that just does the job without any fuss.
Also seen in this review is the super handy FS3 Flipstone with combined ceramic and diamond sharpening stones.

The Video about the Fällkniven U1 I wasn’t going to make:
Originally I wasn’t going to include a video in this review, but after living with the U1c for several months, I felt compelled to add one. Before getting to the detailed galleries and the rest of the review, here it is:

A few more details:

What’s in the box?:
I also got the Fällkniven flipstone at the same time, so you can see it’s packaging here. An unfortunate reality, but the Fällkniven box also has the special authentication label to allow you to confirm it is a genuine Fällkniven. The U1c come in its own dedicated belt pouch.


The Belt Pouch:
As with any knife, the sheath or pouch is hugely important for how easy it is to carry and use. The U1 comes with a perfectly matched small fabric belt pouch with velcro closing. The belt loop design allows for vertical or horizontal carry.


A good look round the Fällkniven U1c – Things to look out for here are:
The construction is kept very simple, and is in fact a 100 year old slip-joint design. The blade pivot sits directly onto the handle liners (perhaps not really even ‘liners’ as they are exposed). The wooden grips of the U1c cover around 3/4 of the handle. Fällkniven are steel laminating experts, and the U1c is no exception, with the 3G-steel visibly laminated into the blade core.


The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.



What is it like to use?

It’s a small slip-joint. I say it that way on purpose, as that is the reality – it sounds a bit boring and not worth taking much notice. Yes, it is a Fällkniven, so that does make it more interesting, and it has a 3G laminated blade, so more interesting again.

But, wait, this does not do it justice in the slightest!

Fällkniven say it is a 100 year old design. Designs that don’t work, don’t stick around, and this has been proven to me again and again while carrying this knife. This is not just and EDC knife, it is an EDU knife (Every Day Use – coining a phrase). Carry it and you will use it over and over, every day.

In my hand, it is a three-finger size knife (I cannot get four fingers to fit on the handle). Remember that your first three fingers are where the majority of your hand strength is, so it is not a handicap at all. The size of the knife makes it all the more easy to carry, and this is massively helped by the dedicated belt pouch, which is itself small and easy to forget about on your belt.

Although there is a double nail-nick (one either side of the blade), I find it easy to open with a pinch-grip on the blade. The action is positive and the blade perfectly secure for every day tasks.

The slight full convex grind on the relatively thin blade allows it to slide through what you are cutting with ease. And that brings me to the 3G steel and the factory edge. Normally in the course of the review testing I will need to re-sharpen an edge, or improve/re-profile it to my liking; over the couple of months I have been using the U1c, it still has a hair popping original factory edge, and I don’t want to re-sharpen it until it really needs it. No noticeable loss in its eagerness to cut from day one – seriously impressed.

Popping on a small lanyard makes getting it out of the pouch much easier and is well worth doing.


There was something that stopped me loving the U1c straight away, and that was the sharp corner on the blade stop and back-spring. These sharp corners give the ‘H’ it’s precision and clean look, but every time I handled the U1c i kept feeling the catch of these sharp edges and it put me off.
Taking a diamond stone to these corners and just easing them slightly transformed the experience of handling this knife. Only a small thing, but suddenly no catching on these sharp corners, instead just appreciating the size, feel, handling and cutting ability. Such an easy fix, if this little detail did bother you, it is easily resolved and worth doing.


As you have already seen, I ended up making a video I hadn’t intended to, simply because this little EDU knife fell into the U1c-shaped hole we all have in our lives.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

Slight sense of being unfinished with some sharp edges.
Nothing else.

_______________________________________________
Things I like
_______________________________________________

Superb cutting from the thin convexed blade.
3G steel just keeps holding its edge.
Compact three-finger size disappears on your belt.
Comes with excellent belt pouch.
Simple, classic, time-proven design.
Blade can be opened with a pinch-grip.
Firm spring and good resistance to closing.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

The BESS Exchange – A forum discussing technical aspects of sharpness and truly understanding your sharpening process.