Month: February 2022

Knife Review: Extrema Ratio SATRE – Special Report

26 February, 2022

The Extrema Ratio Satre is a pocket-sized, light and extremely tough fixed blade knife, designed in collaboration with Daniele Dal Canto, a Master Advanced F.I.S.S.S. instructor. In this special report review of the Extrema Ratio Satre, I am able to carry out a special set of tests to quantify the edge apex stability (resistance to rolling) in a direct comparison of the two steels the Satre is available in, N690 and S600, as I have all three versions of the Satre available to test, the standard Black and Satin (N690) and the S600 version at an super hard 64 HRC. This special report also include two videos, an overview and detailed measurement, plus one showing the steps of the edge stability testing (SET – Structural Edge Testing).

Video Overview

This video is a detailed look at the three SATRE Models, from handling to technical measurements, hopefully something for everyone.

A few more details:

The videos show all three versions, but as the dimensions, shape and function are all identical, the galleries here show the standard Black Satre.

What’s in the box?:

As well as the knife in a bag with desiccant, there is a QC certificate, care instructions and warranty information.

A good look round the Sheath – Things to look out for here are:

The small and neat Kydex sheath arrives with a neck lanyard, nicely laced through the eye rivets that hold the Kydex halves together. These eye rivets allow for other mounts to be fitted such as the ULTICLIP. The sliding adjustment toggle also serves as a safety break-away. There is a drainage hole at the blade tip on one side.

A good look round the Knife – Things to look out for here are:

The Satre knife consists of a single piece of steel with no other material attached to it (ignoring the small cord lanyard). Despite that simple construction, Extrema Ratio have managed to pack it full of character and clearly identify it as one of their designs. The distinctive first finger grip is shaped into the tang along with the small cut out for weight reduction. Plenty of jimping is provided for various grips.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

Structural Edge Testing:

Added in 2019 are results from the Edge On Up Structural Edge Tester (SET) to measure the resistance of a knife’s edge to rolling.

The key factors for the SET results are:
Series 1 Degradation – how much damage the edge suffers from one edge rolling cycle. The damage is represented by an increase in the BESS ‘C’ score. (Averages also shown for A and B)
Series 2 Degradation – how much damage the edge suffers from one further edge rolling cycle. (Averages also shown for A and B)
Degradation after strop – has the edge been permanently damaged/chipped or can it be recovered with stropping? A negative number means it actually improved from the starting figure, suggesting there may have already been some rolling of the edge before testing. (Averages also shown for A and B)

First a video of the testing process, then the table of results.

The following results do show a clear increased resistance to edge rolling for the S600 steel. In fact after two ‘series’ the edge has rolled only a similar amount to the N690 blades have after one ‘series’. This is a clearly stronger and more stable edge apex.
Often this extra resistance to edge rolling can be coupled with a more brittle edge, yet the S600 recovered better than the N690 after stropping. (If it was brittle the edge can chip when stropping and give a high BESS measurement.)
In this table, are the individual results for all three, plus a combined N690 set of totals at the bottom.
The figures in bold in the first column are averages for the single measurements.

The Factory edge up close – NEW FOR 2022!:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

In these galleries are each of the three versions with a before and after SET testing image. The edge rolling is just visible, but not easy to see.

Black N690

Satin N690

S600

What is it like to use?

It’s just one of those superbly useful knives. An easy size to carry and use, or keep as a backup. The size of the knife is similar to a medium sized folder, but being a fixed blade makes it super tough and a real working blade.
Here I’m showing it in an un-gloved hand (a hand which takes XL size gloves). It is compact, and doesn’t fill my hand, but the finger groove provides a really secure grip with the jimping (especially the thumb jimping) giving confidence.

With it being a compact blade and one without handle scales, the knife is capable of much harder work than you can comfortably manage with the bare blade tang in your hand. This design keeps it very low profile and really does make carrying and storing as a backup so much easier than a knife with wider handle.

Either in the pocket, or hanging around your neck the Satre is slim and unobtrusive. I can make this comment, not just based on one example but on all three – the Kydex action is spot on. The sloped shoulders of the sheath are just right to push on to release the knife, and the blade clicks out without a fight. This action is almost identical across all three and holds the blade securely without struggling to sheath or unsheathe it.

As seen in the SET testing section and video, the S600 steel is noticeably tougher. As with any higher hardness and higher wear resistance steel, you will notice the S600 is much more difficult to sharpen, and will need a suitable sharpener. This always makes for a dilemma for field use for me. As much as I love a longer lasting edge, if I might need to rely on one knife and might need to sharpen it in the field I would want to be able to sharpen it more easily and if required with natural stones rather than specialist sharpening equipment. This is just a consideration, as for many the longevity of the edge it already has may be more important than being able to sharpen in the field.

With a blade this thick (compared to its length) it doesn’t slice as well as a finer pocket knife blade would, but this blade is one you know won’t let you down if you need to work it hard. If you put one aside as an emergency backup blade, you know it is going to serve you well.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Pocket clip not supplied as standard.
Blade is relatively thick which affects slicing ability.
S600 steel much harder to sharpen (the cost of its higher hardness and wear resistance).

_______________________________________________
Things I like
_______________________________________________
Choice of blade steels.
S600 steel edge is measurably more stable.
Kydex sheath ‘action’ excellent.
Slim and low profile making carry easy.
Pocket or lanyard carry options.
Very secure grip.
Super strong design.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Knife Review: Pohl Force Tactical Eight and Nine

19 February, 2022

Based on the Pohl Force Mk-8 and Mk-9 knives designed by Dietmar Pohl for the movie Rambo Last Blood, Dietmar has now modified the designs of these two hero knives to create the Tactical Eight and Tactical Nine knives. With slightly reduced dimensions and using D2 steel, the Tactical Eight and Tactical Nine have been tweaked and optimised by Dietmar Pohl to make them more real-world usable. Join me in this review of the Tactical Eight and Nine for a detailed look at these ‘practical’ versions of the Rambo Last Blood movie knives.

Video Overview

This video is a detailed look at the Tactical Eight and Tactical Nine Models, from handling to technical measurements. Hopefully something for everyone and you should have a better idea if you should also pick up one or both.

The Tactical Eight’s Sheath:

The models on test here both use the kydex sheath option (a leather sheath version is available). For the Tactical Eight, a leg cord is provided. The sheath is constructed using eye rivets, and these allow for the belt holder to be attached with four screw bolts that you can remove and flip the sheath round for right/left handed use. A drainage hole is included at the tip of the knife on one side of the sheath. The belt hanger/loop is a very heavy webbing, heavy enough to be semi-rigid. The moulded lips of the sheath fully cover the front of the handle and guard.

A good look round the Tactical Eight – Things to look out for here are:

The Tactical Eight retains all of the identity of the Mk-8 it was based on. The handle scales extend over the sides of the finger guard making it wider and more comfortable to bear into. There is a hidden lanyard hole; the lanyard hole in the blade tang is concealed under the handle scales and a milled channel allows the cord to run under the G-10 and neatly to the rear. Large hollow bolts hold the handle scales in place and would also allow further locations to fit cords.
A large choil and thumb jimping allow for various grip options.

The Tactical Nine’s Sheath:

For the Tactical Nine, a leg strap with plastic clip buckle is provided. The leg strap also includes an elasticated section to provide better comfort. The elastic is added on the inside of the strap in such a way that should it fail, the strap itself is not compromised and would not break. The sheath is constructed using eye rivets, and these allow for the belt holder to be attached with four screw bolts that you can remove and flip the sheath round for right/left handed use. A drainage hole is included at the tip of the knife on one side of the sheath. The belt hanger/loop is a very heavy webbing, heavy enough to be semi-rigid. The moulded lips of the sheath fully cover the front of the handle and double guard.

A good look round the Tactical Nine – Things to look out for here are:

The Tactical Nine also retains all of the identity of the Mk-9 it was based on with highly distinctive curving blade (although without the sub-hilt). The handle scales extend over the sides of the double finger guard making it wider and more comfortable to bear into. There is a hidden lanyard hole; the lanyard hole in the blade tang is concealed under the handle scales and a milled channel allows the cord to run under the G-10 and neatly to the rear. Large hollow bolts hold the handle scales in place and would also allow further locations to fit cords. Handle scale texture is very pronounced on the Tactical Nine with a series of interlocking grooves giving a lot of grip.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from D2 steel.

The Factory edge up close – NEW FOR 2022!:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

Tactical Eight

Tactical Nine

What is it like to use?

Starting this section with a couple of side-by-side comparisons of the Tactical Eight and Nine. In this first photo, the knives are unsheathed and their different scale and ‘weight’ (both visually and in amount of steel). The Tactical Eight being the much slimmer and more compact blade, and the Nine having a bigger presence and striking power.

Once encased in kydex the difference in size is much less apparent; yes the Nine is a larger overall package, but not as much as you might think.

Onto some observations about the handling; with its single guard, the Tactical Eight allows the thumb-forward type of grip and has a thumb ramp with deep jimping for excellent grip. The large choil allows for a choked grip to be used for fine control. However, when tightening this type of grip the heel of the edge can easily cut into your finger, so beware of this.
The handle scales are smooth and shaped well. The spine of the handle is wide and allows a lot of pressure to be applied comfortably, combined with the well shaped finger groove that gives excellent stability.

For the Tactical Nine the grip is quite a different prospect to the Eight. To start with the double guard blocks the use of a forward thumb grip, but being a bigger knife and more of a chopper, this doesn’t feel out of place.
With the ‘practical’ version not having the sub-hilt of the Mk-9, it makes the knife more general purpose and the pronounced finger groove still provides a very stable hold.
With a larger choil than the Eight, the Nine’s choked grip is safer, although you always need to be careful with this type of hold. The double guard also pulls back the choked grip slightly keeping your finger away from the cutting edge.

I do need to mention something I’ve noted for both the Tactical Eight and Nine when it comes to re-sheathing the knives that can catch you out, and you find the striker digging into you hand.

With the use of kydex for the sheaths on test here, the mouth of the kydex sheath envelops the front of the handle and finger guard. To be able to push the knife fully into the sheath you need to grip the handle up and away from the guard. What then happens is that you end up with the striker pressing into your hand as you push the knife home; not very comfortable. The kydex is also quite a firm fit, so requires a reasonable amount of force to click the knife into place, force which translates into the striker digging into your hand sometimes pretty hard.
The leather sheath versions would not have this issue.

In just some of the cutting tests, I was using completely dry and seasoned wood, so not softer green wood. With the Tactical Nine having a serious chopping ability I took it to some fully dry pallet wood, which it destroyed with ease. In dry wood there is a tendency to bind as the depth of cut it is capable of grips the blade. Once you have a few clearance cuts the chips just fly.

The Tactical Eight is not really a chopper, you would need to baton with it for wood processing. It is a great utility knife and very happy at general purpose tasks with the point a good angle for piercing.

If you like the style of the Rambo Last Blood knives and want a hard use, practical, version then Tactical Eight and Nine are the knives that deliver on this. Unmistakably related to the Mk-8 and Mk-9, these practical versions are more usable and made to be put to work.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Striker has a tendency to dig into the hand when sheathing the knives.
D2 steel – for a working knife I prefer higher stain resistance.
Noisy kydex click on re-sheathing.
Having to take the handle scales off to fit/remove the lanyard.

_______________________________________________
Things I like
_______________________________________________
Distinct and iconic design.
Sizing optimised for real use.
High quality fit and finish.
Complimentary designs with different strengths.
Choice of kydex or leather sheaths.
Ambidextrous sheath (remove/refit belt hanger).
Built for hard use.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Knife Review: Extrema Ratio Panthera

12 February, 2022

The Extrema Ratio Panthera is a further development of their T-Razor (that was based on the traditional straight razor) and maintains all the characteristics of the T-Razor, but with a new wharncliffe blade shape and curving claw-like appearance. In this Extrema Ratio Panthera review, I cover all the technical specifications, detailed galleries to show you all the details, a video overview and demonstration of the opening method.

Video Overview

This video is a detailed look at the Extrema Ratio Panthera, from handling to technical measurements. Hopefully something for everyone and you should have a better idea if you should also pick one up.

The packaging:

A good look round the Panthera – Enjoy all the details:

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from N690 steel.

The Factory edge up close – NEW FOR 2022!:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

What is it like to use?

One of the distinctive features of the Panthera (and its sibling the T-Razor) is the extended tang used as the blade opening lever. This is the same style as with a friction folder (which being of Roman design actually predates the straight razor by around 1600 years), and allows both opening of the blade, and holding it in the open position. The Panthera also has a liner lock, so the tang is not used to keep the blade open, only to open it in the first place.

Of course the other striking design feature is the curved claw-like blade used in the Panthera, which makes it stand out.

It’s a big knife. I take XL size gloves and the Panthera is a real handful, just take a look at this set of photos.

The opening method is shown a few times in the video at the start of this review, but here are a set of photos to step through opening the Panthera using the T-Razor speed style of opening.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
No pocket clip.
No case or holster (in lieu of a clip).
Tang opening doesn’t suit everyone.
Lock release is a bit sharp to push on.

_______________________________________________
Things I like
_______________________________________________
Striking and impressive knife.
Curved blade can increase cutting power for many tasks.
Very comfortable grip.
Blade opens quickly (once you are practiced).
Long handle allows for multiple grip positions.
Matte anodised handle finish feels great.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Knife Review: lionSTEEL Myto

12 February, 2022

The lionSTEEL Myto is a superb EDC knife designed by Mik Molletta, with Titanium handles, M390 blade and a removable flipper tab. The version on test has a black stonewashed finish on the handles and blade. Join me in this review of the lionSTEEL Myto for a really detailed look over the design and technical specifications of this excellent EDC knife.

Video Overview

This video is a detailed look at the Myto, from handling to technical measurements. Hopefully something for everyone and you should have a better idea how the knife handles.

A few more details:

What’s in the box?:
Arriving on lionSTEEL’s ‘recyclable’ packaging, this is how it arrives.

A good look round the Myto – Things to look out for here are:
Overall fit and finish is flawless, even with the unforgiving close up photos. As you go through the gallery you will see the details of form (such as round the lock bar spring, or pocket clip, or lanyard hole, or flipper tab etc.) One detail you have to look closely for is the hidden stop pin which is just visible in one of the images. This version in the stonewash finish gives it a nice soft look, ready to be put to use.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from M390 steel.

The Factory edge up close – NEW FOR 2022!:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

Though not the best BESS sharpness measurements, this close up of the edge shows the texturing in the edge that makes it really cut well.

What is it like to use?

Inobtrusive and easy to carry are a couple of first impressions which make a great EDC knife. One thing I wasn’t so sure about when I first picked up the Myto was the solid pocket clip; it seemed too stiff and like it would be difficult to use. I’ve been proven completely wrong on that as actually the clip eases over the edge of a pocket without a struggle, but then is a bit harder to take off, so making it secure.

With the blade on bearings, the flip open is super slick, as you can see in the video. It really doesn’t take any effort at all to flip to the locked position and you can develop a nice slow lazy flip with the blade reliably locking, or really snap it out. The detent if firm without being harsh so you never have to fight with it.

It’s not the first lionSTEEL with removable flipper tab, and you might question the benefits of such a feature. Consider the pros and cons for a flipper. As pros, you might have fast deployment, and built-in finger guard. As cons, one of the most frequent complaints it the messy tab sticking out and the action appearing like a flick knife and in many places or situations causing distress to non-knife people.
So if you want a sleeker looking knife, and one which requires a steady and inoffensive two-handed opening, you undo one screw and off comes the flipper tab. You can then change your mind, just want to mix it up again, or go fidget flipping and on goes the tab.
I did find the tab itself was not perfectly in line due to the removable system, and in trying to get it lined up better I over torqued the supplied tool and started to twist off the end of the torque driver, so beware of this when refitting the tab.
If you have the facility you will likely use it, giving you two slightly different knives in one. I have several folders I wish had the same feature.

In terms of size, the Myto fits in very well in the 3/3.5″ blade length category ideal for general purpose every day tasks. The strong lock and flipper tab/finger guard allow you to work hard with this knife.

I take an XL size glove, and in my hand I can take a full grip and the handle is large enough so that my hand doesn’t have the corners of the butt digging in, instead just extending slightly out of my hand. At the front, the flipper tab acting as a finger guard, keeps the position of the knife safely under control. Just right.

lionSTEEL’s superb engineering stands out the moment you pick up the Myto with absolutely nothing seeming out of place or ‘could be better’, instead everything just being right. Refined, easy to carry and strong blade with great slicing power.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Flipper tab is slightly wonky due to removable system.
Easy to over-torque the supplied tool.
Solid clip feels very stiff.
Glass breaker is scratchy.

_______________________________________________
Things I like
_______________________________________________
Quality engineering.
M390 blade steel performance.
Excellent EDC size of knife.
‘ReF’ Removable Flipper tab system.
Elegant and refined design.
Blade geometry makes for a great slicer.
Solid and slick blade action.
Clip can be fitted for left or right handed use.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Light Review: Fenix PD36 TAC

6 February, 2022

In this review of the Fenix PD36 TAC, I’m going to be taking a detailed look at the details, comparing its performance to the specifications, checking out the beam and how usable it is. The review includes video content as well as photo galleries and technical testing results.
Join me in this look over the Fenix PD36 TAC Flashlight / Torch, a light built around the increasingly common larger 21700 cell (compared to the typical 18650 previously used). This has a specialised tail-cap with physical lockout, dedicated ‘Tactical’ setting, and a normal ‘duty’ multi-mode setting.
Let’s get to really know the Fenix PD36 TAC!

Video Overview

Starting out with the video overview of the PD36 TAC.

What is in the box?:

Unpacking the PD36 TAC and its accessories.

Taking a more detailed look at the holster:

Before moving onto the PD36 TAC itself, this is a run round the supplied belt holster.

A good look round the PD36 TAC – Things to look out for here are:
In the gallery are details of the design, the clip, bezel, contacts, threads, battery, and more…

The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and my wife won’t have one!

Below are the indoor and outdoor beamshots giving you an idea of throw and spill. The PD36 TAC has a great balanced beam with great area lighting.

Batteries and output:

The PD36 TAC runs on the supplied 21700 USB-C rechargeable cell.

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

Measured output is a great match for the specifications.

For the runtime graphs, I have included runs for Turbo and Tactical, which have different starting outputs. Also included is a graph of the first six minutes to better show the difference between Turbo and Tactical modes.

The PD36 TAC in use
The general change towards using 21700 cells is great for two reasons; better runtime/output and a comfortable size to hold. If you were completely unaware of the reason the battery tube was larger than previous generations that run on 18650, you would just be thinking the PD36 TAC is nice and comfortable to hold. The fact that it now houses a 21700 cell with that 5000mAh capacity is a further bonus to the comfort in the hand. Win win at this point.

With that greater capacity of the 21700 cell, this compact tactical light can pump out a huge 3000lm. Go back and look at the runtime graphs to see how impressively the PD36 TAC keeps its output going. The output limitation is more down to thermal capacity for longer runs.

This is the first of this style of Fenix tactical tail-cap I have been able to try. It has three functional modes. One is a simple and solid physical lockout. Line the selector ring up with the padlock, and the button does not move.

The selector ring certainly feels secure enough in its positioning that you won’t be accidentally going between locked and unlocked by accident. You pre-select the type of use you want and leave it there. Bear in mind, you can also use this to lock the PD36 TAC on. If you first turn it on to a mode you want and then rotate the selector ring to the padlock, you can’t turn it off again.

Being designed as a ‘Tactical’ light, most users will likely keep it in ‘Tactical’ mode – instant 2000lm output with momentary or latched action. Half press the tail-switch for momentary output, complete the press to latch it on (or just go for the full press to start with). Holding the switch fully in for about 1s and you enter strobe mode.

Move the selector round to the ‘Duty’ mode and you have access to five different output levels. Starting on ‘eco’ the first time you use it, but after that the last used level is remembered. Changing modes requires a half press – this can either be a half press from off and then cycle through modes before latching on, or a half press after turning the PD36 TAC on with a full press, the half presses then cycling through modes. Personally I would have preferred an automatic reset to eco after a few seconds being off as after not using it for a period of time, you won’t know if you had eco or turbo set, and this could be quite a shock.

The Fenix PD36 TAC is a purposeful lighting tool, and can instantly be reconfigured as either a dedicated ‘Tactical’ light or into a multi-mode ‘Duty’ light to fit with your needs.

Review Summary
The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that covered in the review.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
‘Duty’ mode last used level remembered (so could be on eco or turbo).
Tail-switch has a relatively stiff action.
No grip ring provided.

_______________________________________________
Things I like
_______________________________________________
Great area lighting beam profile.
Nearly 3000lm from a compact light.
Three function tail-cap selector ring.
Dedicated ‘Tactical’ mode.
Proper physical lockout.
Uses a large capacity 21700 cell.
Supplied cell has built-in USB-C charging.
Very usable holster supplied.