Knife Review: Kizlyar Supreme – Sturm and Survivalist X

This review features two knives from Kizlyar Supreme, the Sturm and Survivalist X. I have a soft spot for hollow handle knives, and am always on the lookout for a properly made one that can be used without worrying it will come apart; this is what drew me to the Survivalist X hollow handle knife. To partner this we have the Sturm, a smaller general purpose blade, and for this review in a high hardness steel, PGK from German steel makers Lohmann.

As soon as I came across knife makers Kizlyar Supreme I was impressed with the range of great designs and was very keen to try out some of their knives. Kizlyar Supreme launched as a company in 2011 thanks to the enthusiasm and dedication of its founders, with the intention to provide great designs using high grade materials yet remain affordable.

A few more details:

What’s in the box?:

The boxed Sturm and Survivalist X.

A good look round the Sturm’s sheath – Things to look out for here are:

I’d go so far as to call the Sturm’s sheath a ‘technical mounting platform’ due to its mass of design features and practicality. As you will see in the photos, the sheath is indexed so the blade will only fit into it one way. Though not initially appearing ambidextrous, if the four bolts holding the sheath to the mount are removed, you can flip the sheath over to make it left-handed. While doing this you can also swap from vertical to horizontal carry by turning the mount 90 degrees.

A good look round the Sturm – Things to look out for here are:

The Sturm uses a handle Kizlyar Supreme use for several other models. The blade is a convenient size for most tasks and keeps thing simple with a full flat grind.

A good look round the Survivalist X’s sheath – Things to look out for here are:

Well, in terms of preparedness, even the Survivalist X’s sheath is ready for anything. Packed with features and utility it is certainly comprehensively equipped.

A good look round the Survivalist X – Things to look out for here are:

The survivalist X is a substantial knife, there is no missing its presence, and the hollow handle gives it a particular look and feel.

The Survivalist X’s hollow handle and capsule:

I’m sure we have all had those cheap and cheerful versions and found them not to live up to expectation, but be prepared for something entirely different.
Kizlyar Supreme have ensured there is the maximum amount of metal in the handle tube and blade tang to keep the strength very high. The view into the end of the handle shows the blade tang which comes right up to the base of the capsule, absolutely as far as possible.
Also shown are the capsule contents; fishing kit, wire, sewing kit with safety pin, matches and striker and plasters.

The Blade and Handle – Detailed Measurements:

For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The Sturm’s blade is made from Lohmann PGK steel, and the Survivalist X’s from D2.

On the day it was measured, the Sturm in PGK steel had the best SET test result I had yet measured. The lower the Series 2 degradation (S2) figure is, the more resistant the edge is to being rolled. The recovery strop process shows if the edge was permanently damaged or chipped, or can be fully recovered.
Here you can see the PGK outperforming the D2 steel by a good margin. This is not saying the D2 is bad, in fact the D2 is good, just that the PGK performs better in this test.

Being a new steel to me, I checked the composition which is listed as:
Name – Lohmann PGK
Base – Fe
C – 1.2
Cr – 8.5
Mo – 1.5
V – 2
W – 1.5
Si – 1

What is it like to use?

Picking up the Sturm was like finding an old pair of shoes that fit perfectly. No adjusting or finding my way with this knife, instead just getting on with whatever task. The size of the Sturm is ideal for most of the general cutting tasks you might want a fixed blade for.

The lips of the sheath had arrived with some rough edges from the moulding and these were becoming annoying. Once trimmed off, the feel was transformed as when unsheathing the knife you push onto the lips with your thumb. The retention is a bit strong to just pull the Sturm out without the thumb lever, but is possible when you really have to.

Hollow handles – are they a love or hate thing? If the knife is not well made and the blade comes off, then clearly hate, but if the handle and blade are well fixed and don’t come loose, what then? The Survivalist X has had a hard time from me, heavy chopping and into hard woods; I wanted to see if I could get the blade to shift in the handle – so far not a hint of movement.

So, the Survivalist X’s blade/handle construction is solid and doesn’t look like a weak point at all, then we have the fact it is a round handle. True, a round handle is not the best as it lacks indexing for the grip. You do have to keep an eye on the blade orientation, and in heavy chopping it can spin and twist a little. Nothing unexpected there. The knurling gives good grip without being too abrasive. It is actually not a bad thing that you have to pay attention to the knife and your grip, and I’ve not found this to be a problem.

The Survivalist X is a heavy hitter, and is heavy to carry, so take it when you want a big camp knife, or don’t want to carry a hatchet as well as a knife.

One questionable feature for me is the bone cracker wedge on the Survivalist X’s spine; it is like nothing I’ve seen before. A big knife like this is also good for batoning larger logs, but this wedge damages the baton more than a straight spine. How often do you need to crack bones instead of cutting at the joints? Not sure about that.

I must also mention that the factory edges on both knifes were superb, with good angles, and in hard steels – though not essential, it is very nice to have super sharp blades out of the box.

The Sturm has several different steel choices and the PGK steel has been a really interesting one. I thought I had an issue when cutting packing straps as the edge seemed to dull straight away when cutting some of these, yet as you have seen before, it’s structural edge testing results very very good. I decided to change the edge angle, and it was very slow to sharpen on a belt, showing how hard and wear resistant the PGK steel is. After this reprofile I haven’t had anything similar happen, so it appears to have been an anomaly.

I also can’t quite work it out as a steel, as when I examine the edge for defects, I see reflections that would normally indicate edge damage, yet the Sturm remains sharp and cuts well, defying the normal observations. The bottom line here is that despite what I think I see, the Sturm keeps cutting.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

I’m trying something slightly different and starting with what doesn’t work so well, so I can finish on a more positive note

What doesn’t work so well for me

Sturm – The sheath lips needed mould flashings to be trimmed.
Survivalist X – For a ‘Survival’ Knife I’d prefer a more stainless steel than D2.
Survivalist X – The exposed press-studs scratch the handle.

Things I like

Sturm – Excellent handle comfort and indexing.
Sturm – Blade geometry works well.
Sturm – Range of steels to choose from.
Sturm – Hugely versatile sheath and mounting options.
Sturm – Secure, strap-free knife retention.
Sturm – Great general purpose size.
Sturm – The PGK steel just seems to keep on cutting.
Survivalist X – Very strong construction.
Survivalist X – Big hollow-handled knife – what is not to like?
Survivalist X – Fantastic chopping performance.
Survivalist X – Feature-packed sheath with lots of options.
Both – Very good factory edges.


Discussing the Review:

The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

The BESS Exchange – A forum discussing technical aspects of sharpness and truly understanding your sharpening process.

Gear (Gun) Review: Chiappa Little Badger Pt.2 – Fully Loaded!

‘Fully Loaded’ – This is the second part of the Chiappa Firearms Little Badger Folding Survival Rifle Review, and follows on from Part 1 which introduced this handy little gun. In Part 2 I’ll be covering more details of the Little Badger accessories, how they fit and perform, and a nice modification that, for me, transformed this rifle.

The accessories in detail:

Keep an eye out for the comments on each image. Some of the key points to look out for are:

The effect add-on handles have on folding the rifle, and how easy they are to fit and remove.
A compact scope (from In Your Sights) really does make all the difference in sighting.
Subsonic .22LR plus a moderator really makes for a great combination.
The hammer extension, which seems such a great idea to improve ease of cocking the hammer, might not work as well as hoped.

This gallery will show how they all fit together.

Bringing it all together:

So far the photos have been from an initial studio shoot, but now we are moving onto areas which are being re-visited based on using the Little Badger, plus a game changing modification of one of the accessories.

That modification is of the pistol grip – check the gallery for more.

What it is like to use?

Taking the fully loaded (in terms of accessories) Little Badger for a few range sessions resulted in some unexpected troubleshooting (pun intended)!

Knowing how different guns seem to prefer different ammunition, sometimes not the ‘best’ quality ammo, I went with a selection of usually reliable options.

A Slight Issue – easily resolved:

Comfort and stability were all good, but I found myself struggling to get my test groups shot, as there were SO many misfires. Change ammunition, try again, check the firing pin and hammer, try again.

Normally after waiting for a potential hang-fire, I rotate a misfired round so the firing pin can strike a fresh part of the rim. In some cases I did this six times. With the external hammer, I could of course simply re-cock it and go again without opening the action. This turned out to be the way to get a reliable ignition on all misfires.

This second strike also led me to the misfire being due to a light-strike. Why though? After considering all the options it seemed that possibly the extra weight of the hammer extension might be slowing the hammer speed and reducing the inertia of the hammer striking the pin. OFF with that extension and ON with the shooting. Every strike was now a reliable ignition. A pity, but at least the Little Badger was not at fault.


With the open sights and their limited adjustment, the accuracy was limited too. It felt that the 25yd range would be the most I would take on a live target. With the (max 4x magnification) scope fitted, 50yd would be a comfortable rabbit range, but with the results of the paper target grouping, I would not be happy extending this out to 100yds.

Trigger pull was very good considering the price of this gun. Not quite a glass rod breaking, but smooth, consistent and a good weight. Taking an average and carefully measuring using a force gauge and custom trigger hook, this trigger is breaking at 2.3 lb.

One of the complete joys with this rifle is how easy it is to carry. There are definitely days when I’m not really on serious vermin duty, so might not want to bother taking my usual semi-auto, but the Little Badger comes along without any stress.

Using this excellent little gun also proved to me that if that ‘prepping’ type scenario were to come about, this is the gun I would grab. It is not weighing me down much and the ammo goes a long way. Easy to carry, compact, simple and reliable (without that hammer extension).

The Transformative Modification:

Of the two options, the serious pistol grip is actually a grip made for the Chiappa MFour Semi-Auto rifle. This is the reason it gets in the way of the folding action, it was not actually designed for the Little Badger, but is simply a tried and tested grip that certainly improves the handling.
Making this existing MFour part into a grip specifically designed for use with the Little Badger and allows the full folding action is that transformative modification.
By cutting a slot into the pistol grip I have allowed the rifle to still fold fully. WHAT a DIFFERENCE that pistol grip makes to the handling of the gun. It adds so much stability and control over the bare rifle I would not think twice about having it fitted. If you can make the same modification I highly recommend doing it.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that covered in the review.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

Things I like

Super folding action.
Very compact.
Plenty of rails to add extras on.
Light weight.
Simple, reliable mechanism.
Good trigger pull.
Everyone on the range loved this.

What doesn’t work so well for me

The hammer extension causes light-strikes.
The two pistol grip options interfere with the folding.
Plastic ejector – I’d prefer this to be metal.


Discussing the Review:

The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

Showcase: BUCK 110 Hunter and Hunter Pro

Buck’s 110 Folding Hunter has been a firm favourite since its release in 1963, and is probably the most copied folding knife design in existence. Its traditional mixture of brass and wood (Macassar Ebony Dymondwood), along with the elegant lines and simple lock-back mechanism, has made it a classic with enduring appeal. Now brought up to date in terms of materials with the 110 Folding Hunter Pro using S30V blade steel and Nickel Silver with G10 handle inserts, you can now keep the traditional style but not compromise on blade performance if you need the extra edge retention the S30V will give you.

BESS Certified sharpness testing:

Before we get to the photos, also included in this showcase are the results of the factory edge sharpness testing. These are impressive results; see the gallery for the certificates.

The BESS ‘C’ scale of sharpness, was developed by Mike Brubacher (Brubacher Edge Sharpness Scale).

The 110 Folding Hunter’s factory edge has an average BESS ‘C’ sharpness of 206. At this sharpness it easily and cleanly slices 80gsm copier paper, and will shave the hair from your arm. The 110 Folding Hunter Pro’s factory edge has an even more impressive average BESS ‘C’ sharpness of 195.


Now for the tour around the two versions of this classic knife design; enjoy! (Click on any image to enter the gallery viewer)


Discussing the Showcase:

The ideal place to freely discuss these reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Knife Review: Morakniv Garberg with Leather Sheath and Multi-Mount

Morakniv have released their first (long awaited) full tang knife, the Garberg. Dedicated Morakniv users have been asking for a full tang knife, as they want a hard-use version of the much loved Companion.

 photo 29 Garberg comparing P1240819.jpg

The Blade and Handle Geometry:

Most knife specifications have a basic description of the blade geometry, but in this section I will be taking a more detailed look at geometry and balance.
 photo 32 Garberg grind P1250050.jpg

Using a set of gauges and precision measuring equipment including a Vernier protractor, callipers, fixed radius gauges and the unique Arc Master adjustable radius gauge (the one that looks like a crossbow).
 photo Knife measuring P1180483.jpg

These measurements have been tabulated and are presented along with a few reference blades (8″ Chef’s Knife, 5.5″ Santoku and the popular Fällkniven F1).

Key aspects such as the primary bevel angle, grind type, blade depth, blade thickness, length, weight are detailed, along with balance information.
 photo 31 Garberg angle P1250046.jpg

The ‘Balance relative to the front of the handle’ tells you if the knife will feel front heavy, or if the weight is in your hand (a positive value means the weight is forward of the front of the handle). The ‘Balance relative to the centre of the handle’ indicates how close to a ‘neutral balance’ the knife has in the hand.
 photo 30 Garberg balance P1250042.jpg

In the case of full convex grinds the approximate centre of the grind is used for the primary bevel angle estimate.

 photo Garberg parameters.jpg

The blade is made from Swedish Stainless Steel (14C28N) steel.

Explained by the Maker:

The reasons for certain design choices may not be clear when simply looking at an object, so this section is intended to give an insight into the thinking behind a design by speaking to the designer themselves.

Unfortunately I can’t always get time with the designer so will use this section to include relevant information about the knife and its designer.

This is an interview with ‘Head of Production’ at Morakniv, Thomas Eriksson, from IWA 2017.
The discussion includes how the factory edge is created, maintained and also includes micro-bevels and zero-grinds. It is 16 minutes long, so you might want to come back to this after reading the rest of the review.

Video Edited with – Cyberlink Director Suite 5 (PowerDirector 15 and AudioDirector 7)
Camera – Panasonic HC-V770    Microphone – Tonor TN120308BL and/or Takstar SGC-598

A few more details:

Morakniv did not stop at just making the Garberg full-tang. There are two versions of the Garberg available; one with a full flap leather sheath, and the other with Morakniv’s Mulit-Mount sheath system. The first to arrive at Tactical Reviews was the leather sheath.
The image on the front of the box for the leather sheath version just shows the knife. The Multi-Mount’s box shows the sheathed knife.
 photo 01 Garberg boxed P1220689.jpg

Straight out of the box the knife is hidden by the premium quality leather flap sheath. It is obvious straight away this is a very good quality sheath.
 photo 02 Garberg unboxed P1220692.jpg

A close-up look at the press stud shows the attention to detail with the Morakniv logo embossed around the edges.
 photo 03 Garberg press-stud P1220695.jpg

The stitching uses a heavy duty 1mm thread, cleanly punched though the 3mm leather and the welt.
 photo 04 Garberg stitching P1220698.jpg

On the back, the belt loop is made of the same thick leather as the rest of the sheath.
 photo 06 Garberg belt loop P1220706.jpg

The top of the belt loop is fixed with two rivets, and the bottom with a single rivet.
 photo 07 Garberg sheath back P1220709.jpg

Lifting the flap shows that the main sheath is a deep/full sheath.
 photo 08 Garberg sheath open P1220711.jpg

At the top of the sheath opening, the stitching is complemented with a rivet to prevent the stitching at the top from being cut and unravelling the sheath.
 photo 09 Garberg sheath open P1220715.jpg

And here we are, the Garberg.
 photo 10 Garberg knife P1220718.jpg

Moving in close to the tip you can see the Scandi-grind and the polished cutting edge’s micro-bevel (see the video with Thomas Eriksson, from IWA 2017).
 photo 11 Garberg tip P1220722.jpg

Unlike most of the Morakniv knives, the Garberg has a ricasso, and a nicely radiused Scandi-plunge-line.
 photo 12 Garberg plunge P1220726.jpg

With the Garberg being intended as a hard-use knife, the handle material is not just any plastic, it is a specially chosen extra-rugged Polyamide.
 photo 13 Garberg handle P1220728.jpg

The full tang is exposed at the butt allowing for maximum strength and hammering without damaging the handle.
 photo 14 Garberg butt P1220733.jpg

To make it ideal for use with ferrocerium rods, the spine has been ground to have sharp corners. The logo is laser engraved onto one of the blade flats.
 photo 15 Garberg spine1 P1220737.jpg

This sharp edged spine extends the entire length to the tip.
 photo 16 Garberg spine2 P1220741.jpg

Not long after, the multi-mount version arrived. Note the picture on the box shows the knife sheathed in the multi-mount instead of the knife on its own.
 photo 20 Garberg multi P1240783.jpg

This time there are many more parts in the box. Included are the plastic holster, a basic belt loop, a locking strap, three hook and loop straps and the multi-mount itself.
 photo 21 Garberg multi contents P1240786.jpg

Taking the most basic components, the knife and plastic sheath.
 photo 23 Garberg multi sheath P1240796.jpg

Your first mounting option is the belt loop. This loop is fixed to a plastic ring that slides up the sheath and clicks into place.
 photo 24 Garberg multi loop P1240799.jpg

Next up is the locking-strap used to ensure the Garberg can’t come out of the sheath whatever angle it is mounted. This strap can be used with the multi-mount for the highest security (but not with the belt loop).
 photo 25 Garberg multi flap P1240802.jpg

The locking strap is made of leather for maximum performance and durability.
 photo 26 Garberg multi flap back P1240805.jpg

The multi-mount has many holes and slots to give you a great many fixing options, from screw holes to MOLLE/PALS.
 photo 22 Garberg multi base P1240791.jpg

A hook and loop strap is used to hold the sheath in the multi-mount. The locking strap also threads through part of the multi-mount so will keep the sheath securely in the multi-mount even if the hook and loop strap fails. You can also use cable ties in place of the hook and loop straps for a more permanent fixing.
 photo 27 Garberg in mount P1240808.jpg

What it is like to use?

To start to understand where the Garberg fits in, in terms of how it feels to use, let’s start by looking at in alongside the Companion and Bushcraft Black.
 photo 17 Garberg compared P1220761.jpg

Immediately obvious is the Garberg’s symmetrical handle. This is not an accident, the Garberg’s handle has been specifically designed to allow it to be held in a forward or reverse grip for greater versatility. Overall it is no bigger than the Bushcraft model, but does feel much more solid. The extra weight of the full tang gives the knife a very different feel, even though the blade stock is the same at 3.2mm.
The line of the spine is very similar to the Bushcraft, but the blade of the Garberg has more belly which adds a little more forward weight and reduces the tip angle. We’ll get onto more of it ‘in use’ a little later.
 photo 18 Garberg compared2 P1220765.jpg

Just looking at the two versions of the Garberg, how do you choose between them?
 photo 28 Garberg comparing P1240812.jpg

Clearly the knives are identical, so it all comes down to the way you want to carry it. For belt carry it has to be the leather sheath every time. This is a hard wearing and comfortable sheath and simply won’t let you down. Traditional materials that have proven themselves ideal for the task have been used, and Morakniv have not scrimped on this, using only premium 3mm thick leather.
The multi-mount covers just about any other carry option and even has a belt loop suitable for occasional use.
 photo 29 Garberg comparing P1240816.jpg

Following the huge success of the Companion and other Morakniv knives, the Garberg is an ideal all-round size. A comfortable size and weight which is up to as much work as you would ever really want to put a knife to. Any more blade length starts to bring you into chopping territory and reduced agility for finer tasks, any less and you start to lose wood processing ability.
 photo 19 Garberg in hand P1220770.jpg

Out into its natural habitat.
 photo 33 Garberg outdoor P1250152.jpg

Batoning can be carried out with no concerns at all thanks to the full tang. The sharp edged blade spine gives good grip on the baton, but it does mean the baton gets chewed up faster. The only reason this strike did not go all the way through in one hit, is that I didn’t want to cut into the limb I was resting it on.
 photo 34 Garberg baton P1250202.jpg

You would barely notice that I had been batoning away with this for nearly an hour, apart from a slight smear of sap there is not a mark on it.
 photo 35 Garberg cut P1250211.jpg

Possible mounting locations for the Multi-Mount are so numerous, I’ll just leave you to think of a few yourself, but here is where the Multi-Mount Garberg is currently residing.
In this photo I’ve pushed the rear seats of my car forward slightly to make it easier to photograph. Amongst a few other bits of kit the Multi-Mount is held onto the seat back with the hook part of the large hook and loop straps. Make sure you leave room to lift the knife out of the sheath.
 photo 37 Garberg car P1250356.jpg

In this instance mounting it horizontally resulted in the mount gradually working its way downward due to bumps in the road slowly splitting the hook fastner away from the seat back. Mounted vertically this doesn’t happen. The main downside I see to the Multi-Mount is that it is mainly suited to permanent or semi-permanent mounting and may be slow to move to another location or bag.
 photo 38 Garberg car P1250360.jpg

Throughout the heavy workout I gave the Garberg, there was no evidence of edge chipping or rolling, so it looks like Morakniv have got the hardness and toughness just right. I’m happy to give this a hard time, much more so than the half tang models.
 photo 40 Garberg shelter P1060923.jpg

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________ _______________________________________________
Things I like What doesn’t work so well for me
_______________________________________________ _______________________________________________
Knife – Full tang making this the most robust Morakniv knife. Knife – Thick blade less suited to fine work and food preparation.
Knife – 3.2mm blade stock gives very high strength.
Knife – Scandi grind well suited to wood processing.
Knife – Symmetrical handle allows for a variety of grip options.
Leather sheath – High quality construction. Leather sheath – Flap can slow down re-sheathing.
Leather sheath – Hard wearing 3mm leather used throughout.
Multi-Mount – Incredibly versatile mounting solution. Multi-Mount – Mainly suited to permanent mounting and can be slow to relocate.
Multi-Mount – The system also includes a standard belt hanger.

 photo 39 Garberg forest P1060909.jpg


Discussing the Review:

The ideal place to discuss this reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in any discussion.

EdgeMatters – Sponsored Reviews (UK based Forum for Knife Makers and Collectors)

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)