Tag: folder

Knife Review: Mercury Luc

11 December, 2025

In this detailed review of the Mercury Luc, Tactical Reviews presents a close look at Mercury’s modern take on the slip joint folding knife. Join me in this Mercury Luc Review for all the details.

The Mercury Luc is inspired by the classic hunting pocket knives from the 1960s; a traditional design, but now fitted with an Elmax stainless steel clip point blade. The handle is made from 6061 aluminium with choices of black or green anodising, and optional micarta/G10 inlays.

Of course the slip joint knife dates back far earlier than the 1960s, generally considered to have emerged in the 17th Century with the introduction of a back spring that revolutionised the folding pocket knife to create a simple, reliable and practical tool; popularised as the ‘penknife’ for shaping quills. For good reason this traditional design of knife mechanism remains popular and useful today.

What’s in the box?:
For this section there is no box or packaging to include, as the specific knives featured were ‘show knives’ at IWA Outdoor Classics 2025 (and possibly other exhibitions). It also means that in the following galleries, any imperfections will be due to each knife being handled by a lot of people during the trade fair.

A good look round the folded Mercury Luc – Things to look out for here are:
Starting off with a lot of different views round the folded knife to see it from all directions. The lanyard hole is ingeniously incorporated into an exposed section of the backspring, making it very accessible and easy to tie into. One side of the pivot bolt has the Mercury logo engraved into it, the other side is a domed torx screw head with decorative fluting. Peeled G10 is used for the orange handle insert, held in place the two screws. In keeping with the simple reliable design we have phosphor-bronze pivot washers.
As another option, the insert can also be micarta, a much softer feeling material, but one which will take on a patina through use.

A good look round the open Mercury Luc – Things to look out for here are:
Swinging out the Luc’s clip-point blade shows the modern touches on this classic. Elmax as the blade steel, an angled milled slot as the nail nick, and high tolerance finishes with the H clearly displaying this precision. A flat grind, clip-point blade, with bevelled swedge and stonewashed finish showcase its modern construction.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from Elmax steel.

With the Mercury Luc being a slip-joint folder, the resistance to closing (and related stiffness of opening) is an important factor, so for this I carry out Torque measurements for opening and closing.

And the torque measurements for the Mercury Luc (for further reference values check the Technical Testing link):

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

What is it like to use?
Mercury’s Luc reinforces why the slip joint folder pocket knife has been so popular and successful since its inception around 400 years ago. It is a daily tool for all the smaller every day cutting tasks that don’t need a larger, stronger and heavier cutting tool. A type of knife that allows quick, intuitive opening and closing without a lock, but with a spring to provide enough resistance to make it safe to carry and use. Just quickly unfold and fold as needed without having to unlock.
There are those who take the view that non-locking slip joint knives no longer have a place due to being ‘unsafe’ to use, and liable to close unexpectedly on your fingers. However this ‘problem’ with slip joint folding knives is due only to incorrect cutting technique, or inappropriate use of the tool for a cutting job it is not suitable for, and nothing to do with the design at all. Used correctly and appropriately, the slip joint is absolutely relevant and the ideal tool for most smaller cutting tasks. As long as you ensure the cutting force is applied in the direction that pushes the blade open, it cannot close on you, and is perfectly safe to use.

Shown here in my XL glove sized hands, the Mercury Luc is not an insignificant knife, but also not overly large. Easy to handle and comfortable to use for appropriate jobs (those not requiring heavy cuts), the Luc is extremely practical. When taking on slightly heavier cuts the spine is comfortable to press on with your thumb for that extra control and pressure.

Modern urban life, and those directing how we live, seem intent on diminishing the importance of every day tools, but even the tear-open packaging is much better when cleanly cut open. Let’s make the pocket knife an even more common every day tool, and use it how it should be used, to give us back control and provide choice for how we shape our experience in life.

The Mercury Luc gives us a simple, reliable, tool that just does what you need of it; no more, no less.

Carrying both the G10 and micarta versions on me constantly, despite this only being a difference in handle insert, the experience is quite distinct. The G10 has a crisper, brighter look, not just as it is orange, but the G10 has a sharpness. Peeled G10 is very grippy, but also abrasive and this can be fatiguing. With the canvas micarta, this material feels softer (despite also being resin based), warmer and much less harsh to hold. Though not really natural, the micarta has a more natural feel, and like a natural material is more likely to change in appearance through use. Personal preference will dictate your choice.

Mercury Luc Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
The sharpening choil is too small to fully access the heel.
Peeled G10 can be a bit harsh and abrasive.

_______________________________________________
Things I like
_______________________________________________
Elmax steel provides excellent edge retention.
Firm backspring and open/close action.
Nail ‘nick’ slot gives really good grip.
Handle width is both comfortable and slim.
Reliable and strong phosphor-bronze washers.
Choice of G10, micarta, or plain handles.
Super accessible lanyard hole.
Clean, modern, clip-point blade design.

Mercury Luc Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

 
Discussing the Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.

Knife Review: MKM Jaques Slipjoint

19 October, 2025

In this detailed review of the MKM (Maniago Knife Makers) Jaques – a modern slip joint Folding Knife – find out if it could be your ideal EDC companion.

The MKM Jaques is a slip joint folding knife designed by Jesper Voxnaes. The Jaques has a satin finish CPM MagnaCut Wharncliffe blade, and the version in this review features Fat Carbon DARK MATTER BLACK handles.

“The Jaques design is my modern take on the folders I have seen used by European winegrowers in both Italy and France but mixed with details from some of my favourite American slip joint patterns. A nice sized utility folder, in high-end materials, with great feel in hand. A perfect for EDC for urban and outdoor settings.” Jesper

Read on in this MKM Jaques Review for all the details.

What’s in the box?:
For this section there is no box or packaging to include, as this specific knife was a ‘show knife’ at IWA Outdoor Classics 2025 (and possibly other exhibitions). It also means that in the following galleries, any imperfections will be due to the knife being handled by a lot of people during the trade fair.

A good look round the folded MKM Jaques – Things to look out for here are:
With this version, the DARK MATTER BLACK handles compliment the bronze titanium bolsters/liners perfectly. Each and every knife with this handle material is unique, and the handle scales are secured to the combined bolster and liner with three screws. A single position stainless steel wire pocket clip, can be removed if you prefer not to use it. Only one side of the pivot bolt has a torx screw head, with the other being blank. The back-spring spacer is beautifully polished giving the Jaques a very refined look. The pivot specification states ball bearings. No bearings can be seen when looking into the knife, so these covered bearings should be more dust resistant than when you can see the ball bearings themselves.

A good look round the open MKM Jaques – Things to look out for here are:
Snapping the Jaque’s blade initially out to the half-stop position, we get a good view of the wide Wharncliffe blade. With the blade open we can more clearly see the handle shaping with two finger grooves; first finger and third finger. It’s a powerful full-flat grind Wharncliffe blade with elegant swedge sweeping down to the point, which also has an inconspicuously incorporated nail nick. MKM’s logo sits above the engraving of the steel type; Magnacut. Though not strictly a sharpening choil, the heel of the cutting edge does stand proud of the tang, and just forward of the plunge line; this allows the entire cutting edge to be sharpened. On the opposite side of the blade, the designer’s (Jesper Voxnaes) logo is engraved and onto more views of the blade.
Thumb grip jimping has been included across the ‘H’, and you can also see the small clearance step cut around the pivot to ensure the blade rotates without contacting the liner. Looking inside the handle you can see the stop pin for the blade tang to rest on when folded.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from Magnacut steel.

With the Jaques being a slip-joint folder, the resistance to closing (and related stiffness of opening) is an important factor, so for this I carry out Torque measurements for opening and closing. The detailed video for this knife includes a section explaining this in more detail.

And the torque measurements for the Jaques (for further reference values check the Technical Testing link):

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

What is it like to use?

The MKM Jaques immediately strikes you as both traditional and cutting edge design (pun intended), with a fusion of classic lines and styles with the very latest materials in a really easy to carry tool. Remember that ease of carry is what makes a tool the best one you have, as the fact you have it on you means it is the best tool for the job.
However, it is not only easy of carry, but that you choose to carry it, that is the final determining factor for being the best tool. For me, a Wharncliffe blade has always been one of the most practical choices, with the blade tip presented for immediate use, and the straight cutting edge easy to control, plus it is also easy to maintain the straight edge.
I take an XL size glove, and some pocket knives can feel too small in the hand; the Jaques does not. Compact, yes, but a very useful size. With the first and third finger grip grooves, it is very stable in your hand. Bearing in mind this is a slip-joint, so you are not going to be working it very hard, there is plenty of grip and plenty of blade.

I would prefer a slightly deeper carry clip so that only the clip is visible in your pocket and none of the handle, but the clip, as it is, is very neat. That would just be a slight change I would make if I could.

The action is nicely crisp, with a good resistance to closing (as proven by the torque measurements). In a slip-joint, I remain unconvinced about the benefits of using ball bearings; this is a personal view relating to the fact there is significant slip-joint back-spring pressure, and considering that over the full lifetime of the knife solid washers would removing the possibility of dirt/grit affecting ball bearings. However, it is very smooth in action, even with the spring resistance making that action very firm, so whatever my personal preferences may be, the blade action is very slick and pleasing.

Looking back at this gallery, I realise that all the jobs I have been using the Jaques for have been those smaller, make a cut – fold and stow, type of jobs and I wasn’t getting a camera out to capture it. Round the garden, at the post office, DIY, at work, all those jobs you use the knife you have on you to do. All done with ease and comfort, while appreciating the fit, finish, action and really effective blade. I’ve only once substituted the Jaques for one job where I preferred to use a disposable utility knife for – no point in knowingly damaging a quality knife for the sake of it.

As I write I also realise the edge has not needed any touch up, even considering this was the original edge that has been to big exhibitions and been used, dropped, handled so many times, yet it is still going strong.

Sadly these days, a knife’s looks are also important for the wrong reasons. What I mean by this is that some knives look ‘dangerous’ (in the words of others), but the Jaques has a gentle, traditional, look and feel which has been well received universally. In fact, it has been often complimented by people that might otherwise be critical of a knife. This allows you to feel more relaxed using the knife when others might see. A rare thing to really be able to enjoy using a knife wherever you are (at least in the UK).

MKM Jaques Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Pocket clip could be ‘deeper carry’.
Are ball bearings necessary for the pivot?

_______________________________________________
Things I like
_______________________________________________
Magnacut, Titanium and Carbon Fibre construction.
Traditional design styling.
Wide full-flat Wharncliffe blade.
Firm slip-joint action.
Integral bolster and liner.
Polished back spring detail.
Compact and easy to carry.
Excellent grip with first and third finger grooves.
Easy pinch-grip opening.

MKM Jaques Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

 
Discussing the MKM Jaques Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.

Knife Review: ANV A100 Ultem

3 September, 2025

In this detailed review of the ANV – ACTA NON VERBA Knives A100 Folding Knife, find out if this could be the perfect size for everyday tasks? Read on in this ANV A100 Ultem Review to see. The version of the A100 featured in this detailed review has Natural Ultem for the handles and a DLC coated Sleipner blade.

The ANV A100 has a sleek modern design and is made from the latest materials. The single sided (you choose the side to suit your handedness) thumb stud features a glowing Superluminova dot, as used in luxury watch faces.

The handle used for this A100 is made from Natural Ultem (polyetherimide) which is a semi-transparent high strength plastic material that can operate in high service temperature environments with excellent chemical resistance. It also has outstanding electrical properties, with one of the highest dielectric strengths of any thermoplastic material. Best known for its use in the aircraft industry, it has also been a popular material choice in the knife world.

ANV specify the A100 as using A-lock, more commonly known as an Axis Lock, and the A100 has an ambidextrous deep-carry wire pocket clip.

What’s in the box?:
The typical ANV presentation for a folder is a black cardboard box with precision cut foam liner perfectly securing the knife in place. Also included is an information card.

A good look round the folded A100 – Things to look out for here are:
And now onto a large gallery looking round the knife in the folded state. At first glance the apparent colour choice may seem unusual with its yellowy-orange colour, but remember this is a feature of Ultem in its Natural, or uncoloured, state. The A100 has other handle choices including dyed Ultem and a range of colours in GRN (depending on availability). The fact it is Ultem is to be celebrated.
The transparent natural Ultem also makes it easy to see what is going on inside. A deep carry wire pocket clip can be fitted to either side of the handle. As strong as Ultem is, the A100 uses small steel inserts for the a-lock and bearings, and the exposed edge of the liner has thumb-grip jimping. The pivot bolt is one sided, and is in fact secured with blue loctite. The handles are attached to a GRN back spacer with small screws.
For the A100, a single-sided thumb stud is used. This is an interesting design where the stud and treaded post are one piece, and it is not a screw going through the blade and into the stud. When removing it to swap sides, remember you actually screw it in with a T6 bit to remove it and then tighten it by unscrewing what appears to be the ‘screw head’.

Back to the gallery after the little thumb-stud aside…the floating GRN back spacer covers the entire length of the handle where the cutting edge might be seen.
Looking between the jimped steel liners the lock bar and stop pin can also be seen.

A good look round the open A100 – Things to look out for here are:
Swinging out the distinctive ANV blade allows us to further appreciate the clear natural Ultem handles by watching the lock mechanism’s function, and with the dark blade out of the handle the Ultem really lights up.
There is no mistaking the ANV blade shape, and the Sleipner steel used in this version has a DLC coating to protect the steel.
Going in close to show the plunge line and sharpening choil details, and with the blade open the size of the steel liners is easier to see.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from Sleipner steel.

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

What is it like to use?

Immediately the A100 feels slim, light and easy to carry, but not insubstantial. In fact its weight belies that the A100 is a good sized knife. The gallery below shows the A100 in my XL-glove sized hand.

Yes, it is slim in the hand, but this slim profile makes it so easy to carry. Combined with the deep carry pocket clip it virtually disappears and you are not aware it is there (which can give you the occasional ‘oh, no, have I lost my knife?!’ stress). Tip-up is my preferred clip position, and although this is considered more hazardous, remember the A100 uses an A-Lock (which I would identify as an Axis-Lock) so the lock spring also positively keeps the blade closed. With this positive spring pressure it massively reduces the likelihood of an unwanted pocket-open. It isn’t something I would be concerned about with this knife, so the layout works perfectly for me.

Putting it to use, and with the toughness of the Ultem to play with, I decided to give it a literal beating. A bit of batoning, but without the lock engaged. The smaller steel liners might not have been able to spread the shock I normally generate while striking, so I used the unlocked blade method. You will see the blade locked to then work the blade out of the cut, which you can’t do if it isn’t locked. That was enough of that, as I really don’t like unlocked-folder batoning.
Moving onto carving and shaving cuts, the A100’s blade really bites in and cuts aggressively but smoothly. The slim handle does feel harder work in heavy cuts; of course it would. The A100 doesn’t shy away from the hard work though, and has done its stint as my beater knife with whatever thrown at it. The DLC has taken everything in its stride and knowing Sleipner is only a semi-stainless, it has surprised me that the edge bevel is not showing any corrosion despite being left well covered in ‘garden goop’, various plant/tree sap, and whatever else was on what I was cutting.
I am always a bit surprised at the popularity of ball bearings in knife pivots, as exactly as I would expect on a user exposed to dust, the A100 has become gritty. The blade no longer moves under its own weight with the lock held open. It is not stiff in action, but is not smooth as it was out of the box.
ANV effectively sell the A100 as a sealed unit, and do not advise disassembling the pivot as the bearings can be very difficult to get right again (and it has blue loctite on the pivot bolt). This then leaves non-disassembly methods of cleaning. Air blasting, WD-40, and maybe even ultrasonic cleaning.

ANV aimed the A100 at EDC (when your local laws allow carrying a locker) which prioritises factors like size and weight, to make you want to EDC it. Not only have they hit the target on weight, slimness, and ease of carry, but at the same time included a good sized blade with an eager cutting blade profile, AND their signature ANV svedge grind (a faux harpoon, to my eye), making it a very efficient and useful tool to carry.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Bearings becoming gritty in dusty environments.
Slim handle can dig in for heavy cutting (as you would expect).

_______________________________________________
Things I like
_______________________________________________
Light and easy to EDC.
Deep carry clip makes the A100 almost disappear in/on your pocket.
A good size, despite being lightweight, so large enough for most tasks.
Smooth bearings (when kept clean).
Ambidextrous with movable thumb stud and clip.
Choice of blade steels.
ANV Svedge blade shape.
Resilient DLC blade coating.
Super tough Ultem handle.

Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

Thanks for joining me in this ANV A100 Ultem Review.

 
Discussing the Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.

Knife Review: MICROTECH SOCOM Elite

17 August, 2025

A time-tested classic, the Microtech SOCOM Elite Manual has set a standard for tactical and utility knives. In this detailed review of the Microtech SOCOM Elite Manual folding knife we look at the current 2025 incarnation of this classic.
The original SOCOM has remained a highly popular folding knife since its inception in 1996. Over the years improvements have been made, making the SOCOM more adaptable to different environments. The SOCOM Elite has a unique handle shape that molds to your hand and is offered with different blade shapes and finishes. This review model is the ‘Socom Elite T/E Blue Standard 161-1 BL’ – featuring the Tanto black cerakote blade.

What’s in the box?:

A very smart appearance in a black box with red metallic logo; inside the box is an information pack with sticker, and the knife in a plastic bag with warning label.

A good look round the (folded) SOCOM Elite – Things to look out for here are:
With many details to focus on, this gallery shows the features that can be seen with the knife folded. The SOCOM Elite’s handles are intricately machined to incorporate a multitude of features, recessed grip panels, back spacers, thumb stud easing, thumb ramp and reverse grip jimping, lanyard hole amongst many others. The single position pocket clip dog-legs around the pivot bolt. At the front of the handle are the recesses which the thumb studs rest against as the blade stop. This current version of the SOCOM Elite also has a glass breaker in the butt of the handle.

A good look round the open SOCOM Elite – Things to look out for here are:
As that wonderful two-tone blade swings out, we can start to pick out some other details like the internally recessed liner lock bar emerging into its engaged position. Lighting up the inside of the handle shows the lock bar with its two spring cuts, and how this fits into the internal recess fixed in place by two screws from the outside of the handle.
With the blade fully deployed, the shape and excellent ergonomics of the handle are clear. For the SOCOM model, the dual thumb studs are the blade stop. A relatively large stud diameter has been used, and this fits into matching grooves in the front of the handle to provide a very secure blade stop. This design also keeps the thumb studs more out of the way than designs that don’t use this blade stop method.
Current models use Cerakote for the blade coating, which gives a very matt finish and deep colour on the black/two-tone blade. With a gently curved plunge line, and choil shape ensuring the cutting edge is fully sharpened all the way to the heel, there is no compromise in strength or performance. The SOCOM even includes a section of jimping on the blade above the thumb studs for maximum grip security when moving your grip forwards. Marked on the blade as M390, the blade steel is actually the Microtech M390MK which is a subset of the M390 specification using tighter compositional tolerances – officially it is still M390 and is marked as such.

Explained by the Maker:
In this section I’m including words directly from the maker themselves.

The SOCOM Elite Manual sets the standard for tactical and utility cutlery. The original SOCOM has remained a highly popular folding knife since its inception in 1996. Over the years improvements have been made, making the SOCOM more adaptable to different environments. The manual SOCOM has a unique handle shape that molds to your hand.

Microtech Socom line takes its name from the United States Special Operations Command, SOCOM for short. SOCOM is the operational command of the United States Department of Defense responsible for special operations. Under its supervision are units such as the Navy SEALs, Air Force PJs, Army Rangers and others.

This knife was designed to meet the expectations of US Army special forces operators. Its design is the result of long-term research and testing aimed at creating a tool that is optimal in terms of functionality and durability. The blade is made of Microtech’s own version of Böhler M390 steel, designated M390MK, which has tighter specifications within the M390 standards, so ensures a greater consistency for the production processes and ultimately consistency of performance for Microtech knives. The knife’s handle is made of aluminium, which makes it lightweight and durable. Special 3M inlays ensure a secure grip even under the toughest conditions.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from M390MK steel – this is a subset of the M390 specification using tighter compositional tolerances – officially it is still M390.

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges. Also included is an image at the same magnification of the laser engraving.

What is it like to use?

When you pick up a SOCOM Elite, you can immediately understand why it is still made nearly 30 years after being launched. Yes, it has a few tweaks to further refine it, but fundamentally it’s the original classic. As you can see in this gallery, in XL-glove sized hands, the SOCOM Elite is a large folder that allows multiple stable forward and reverse grip positions (with or without gloves). That handle length ensures the glass breaker isn’t an afterthought, but really effective striking point. Personally I have never had to use a glass breaker for breaking glass, but this could also be used defensively as a crushing point, or to more safely split open a hard container/shell.
Handling is excellent, ramps, jimping, curves, grip panels and contouring all combining to a knife that feels right in your hand, and ready to be put to use, so let’s do that now…

As a hard-use design, being intended to withstand military deployment, it’s first test was one I’d usually only put fixed blades through. Especially as I’ve just made a new, heavier, baton for the pallet cutting test, meaning it was going to be taking even more of a beating.

With a thick blade (for a folder) it needed quite the firm batoning to get this first cut. The top view of the cut show just how much the wood is being pushed apart for a full blade depth cut. Batoning a folder is not for the faint of heart, nor is it much good for even the toughest of folders, but if it can take some of this abuse it shows how strong the knife is. I’m not one for the ‘unlocked blade’ type of batoning, as you lose so much control, even if protecting the lock and pivot, so this was done with the blade locked. The pallet cut was completed in stages, taking out sections by cutting each end and popping out a chunk. The last strikes of the baton snapped the final part of the board instead of making a clean cut.

Immediately after this pallet cut test, the blade and lock were showing a bit of play, and the front of the handle where the blade stops contact it showed a slight indentation of the thumb studs/blade stops. Oddly while working the blade and lock to check what I might have damaged and if I could adjust it back, the lockup self-healed and without anything other than about 20-30 open and close cycles, it was back to a rock solid lockup. I suspect (but cannot prove) that this was the ball bearing pivot having been knocked out of position slightly, settling back after several opening/closing cycles, and might never have happened if solid washers had been used. Lesson 1, we already know, batoning with a folder is not good for it, but the other lesson is how much abuse the SOCOM Elite took in its stride and then sorted itself out.

Not the finest of ‘feather’ cutting, but with more practice and a re-profiled and re-sharpened edge I’m sure this will improve. The factory edge cuts well, especially considering it is a 58 degrees inclusive edge.

From heavy cutting to much lighter tasks (opening the next review knife package) the SOCOM Elite is a pleasure to use and efficient cutter. Of the available blade types, the Tanto blade does have a thicker wedge profile, so is one of the stronger blades for super heavy use, but you may want one of the other higher grind blade shapes for a more slicey action.

The final images in the gallery above show the Cerakote wear, almost all of which was from the pallet cut test. Typically a DLC coating will clean up without marks after this test, so the Cerakote is much less robust. Cerakote generally does have a more matt finish than DLC and this is a good fit for the two-tone blade finish, but will show wear.

Microtech’s SOCOM Elite definitely does deliver what it promises, an ergonomic and powerful folder, and you will want to use it.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Cerakote already showing wear.
Ball bearings instead of washers.
Single position pocket clip.

_______________________________________________
Things I like
_______________________________________________
Fantastic ergonomics.
M390MK Steel.
Super strong lockup.
Large comfortable thumb studs.
Excellent grip panel texture without being abrasive.
Plenty of Jimping and grip ramps.
Distinctive styling.
Glass breaker/striker pommel.
Built to take heavy use.

Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

 
Discussing the Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.

Knife Review: Viper TURN

11 February, 2025

Viper TURN a Detailed Review – The TURN is a folding knife designed by Fabrizio Silvestrelli, blending tradition, practicality and modern construction techniques. We’ll also be seeing how, in this Viper TURN Review how distinctively ‘Viper’ this knife is. The TURN’s blade is Böhler M390 steel and described by Viper as having ‘a bold counter-bevel’ on the satin finish blade. A double stepped-cone thumb-stud allows easy opening with either hand. Unusually for a back-lock, TURN uses ball bearings for the pivot to ensure a smooth and fluid rotation of the blade. This Viper TURN review features the Essential G10 version that includes a deep-carry titanium pocket clip.

What’s in the box?:
Or should that be ‘Where is the box?’. As mentioned in the video, this was a display knife at IWA 2024 so is being reviewed without any of the normal packaging. So here it is in a bag, and not in a bag!

A good look round the closed TURN – Things to look out for here are:

Being the ‘Essential’ model, there are no bolsters, instead the handle material covers the entire side of the knife. Around the pivot bolt is an extra washer detail. A singe position deep-carry titanium pocket clip is fitted in a tip-up right-handed location. The polished lock bar has grip grooves on the release ‘button’ and thumb grip jimping at the other end. Full length stainless steel liners provide the main structure. A pair of stepped-cone thumb-studs make the blade opening ambidextrous.

A good look round the open TURN – Things to look out for here are:

Swinging open that gloriously wide blade, and as we open it you see the lock bar action in operation. Thumb grip jimping spans the lock / blade contact point forming the clean ‘H’. Very stylish contouring of the G10 handles creates a grip shaping your fingers will settle into. That ‘bold counter-bevel’ is something I would describe as an elongated harpoon style swedge, and bold it certainly is.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from M390 steel.

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

What is it like to use?

Viper describe the blade as having ‘high bevels’, and indeed it does, in fact verging on the full-flat grind apart from that bold swedge. It is an excellent blade geometry for eager slicing and the TURN is indeed a very efficient cutter.
I’d classify it as a mid-sized folder, large enough for most ever day jobs, and small enough to be easy to carry.
Viper’s stepped-cone thumb-stud has drawn blood on previous occasions on other knives, and could easily do so again. They are a bit on the sharp side and it is when I’ve had hardened skin on my thumb (from too much knife opening) that the cone shape has punctured/cracked this skin and I’ve ended up bleeding over the knife. Grippy these thumb-studs are, but also high pressure.

This might be the ‘Essential’ version of the TURN, but it is still lovely to look at. The blend of a traditional back-lock folder layout with a modern, efficient, cutting blade profile, using high performance materials and features that increase its usability is spot-on.
Viper’s signature polished spacer and lock bar contrast with the bead blast liners and black G10, giving the TURN a distinctive and stand-out look.
If I had to pick one position for the pocket clip, it is exactly where Viper have positioned it. Tip-up, right-handed; it is going to be best for the majority, and for the left-handed it only needs one small adjustment before opening.
The near-full-flat grind makes the TURN a fantastic slicer, and with great control too. The relatively wide blade adds to stability during cutting, so it is a real pleasure to use.

Review Summary – Viper TURN Review

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Thumb-stud a bit ‘sharp’.
Single position clip.
Potential hot-spots on the grip.

_______________________________________________
Things I like
_______________________________________________
Excellent fit and finish.
M390 blade steel.
Classic Back-Lock.
Super-smooth blade action.
Ambidextrous opening.
Powerful slicing geometry.
Deep-carry pocket clip.
Premium satin blade finish.
Refined style.

Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

 
Discussing the Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.

Knife Review: Spyderco Military 2

6 February, 2025

Spyderco’s Military 2 – The 2024 Update of a Classic. The original Spyderco Military Model was designed in 1996, and is a tried and tested knife, proven to be a robust and reliable tool. Building on the strengths of the original design, the Military 2 is refined and updated, bringing in improvements where they make a real difference. Larger stainless steel liners give the knife increased structural strength and also allow the addition of four pocket clip fixing positions. A major switch has been made away from a liner lock and to the signature Spyderco Compression Lock improving safety and handling. Join me in this detailed review of the Spyderco Military 2.

Is the ‘New and Improved’ Spyderco Military 2 actually an improvement? Read on to find out.

What’s in the box?:
This Military 2 comes in the familiar Spyderco box. Included with the knife is a sticker and a leaflet about the exact model of knife.

A good look round the closed Military 2 – Things to look out for here are:

Some of the more obvious updates are easy to spot straight away. The extra pocket clip fitting positions, and compression lock on the back of the handle. Notably missing is the liner lock handle cut-out that normally affects the grip, as the Military 2 now uses a different lock. There is no longer a hole in the clip mount to access the pivot bolt; should you continue to use the clip in a tip-down position, you may need to take it off to adjust the pivot. Next to the compression lock lever, the liners include some thumb grip jimping. Having a choice of all four pocket clip positions is a massive improvement, as clip position is quite a personal choice, and depending if you pocket carry or put onto webbing, you might want to swap this around from time to time. Phosphor-bronze washers; my favourite for stability and reliability.

A good look round the open Military 2 – Things to look out for here are:

Opening up the blade to reveal that long, eager edge. This is a Large folder, no mistaking that. Now we have the blade open you can see the compression lock engaged in the locked position. Thanks to the change of lock, the handle shape can be optimised for grip instead of incorporating the liner lock cut out, so we have improved first-finger grip shaping. Large blade – Large opening hole.

Explained by the Maker:
Spyderco describe the Military 2 as follows.

Designed by Spyderco co-founder Sal Glesser as the perfect knife for forward-deployed military personnel, the original Military Model is one of the cutlery industry’s most iconic designs. More than 25 years after its original release, the eagerly anticipated Military 2 builds on that hard-earned reputation while incorporating several significant design improvements. Instead of a LinerLock, the Military 2’s full-flat ground CPM® S30V® blade is supported by Spyderco’s signature Compression Lock® mechanism, which offers greater strength and even safer one-handed operation. The stainless steel liners that form the foundation of the lock are larger, giving the knife increased structural strength and anchoring its four-position pocket clip, which is configurable for left or right-side, tip-up or tip-down carry. The skeletonized liners are nested within peel-ply-textured G-10 scales to maintain a slim profile and complement its open-backed construction to reduce the knife’s overall weight. A proud successor to a legendary design, the Military 2 is ready to serve.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from S30V steel.

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

Spyderco’s factory edges are reliably excellent.

What is it like to use?

We all know what ‘New and Improved’ typically means for our favourite products…it normally means ‘cheaper to manufacture and worse’. Typically.

What about the Military 2, what have Spyderco done to our beloved Military? Well, they have, in fact, made it better. This is not to say the original Military, if Spyderco continue to make the classic, no longer has a place; it is still the classic liner lock it always was. If you pick up the Military and swap to the Military 2 and back, fundamentally they are the same with a long pointy blade, long handle, and powerful cutting ability. Instead it is in the more subtle refinements that the Military 2 shows it improvements, those small differences in regular actions and handling that start to shine through.

General handling makes a couple of those updates all the more apparent. The forward choked-up position now has the proper first finger shaping and grip; it just fits and sits better. Open and close, open and close, and the ease the Compression lock brings also shines through. One-handed closing becoming a breeze with the lock released, and the blade falling closed under its own weight, made safer as you do not need to put your hand in the blade’s path to unlock it.

I absolutely love a big folder, and the Military 2 just wanted to get to work, so who am I to stand in the way! The blade reach is excellent, making all the jobs I deployed it for quick and easy. Over and over those two biggest changes, the lock and improved grip shape making the knife itself almost disappear and the jobs complete themselves. For me the Tip-Up clip position and right-handed side means that as I draw the knife out of my pocket, the handle is already in the right orientation and my thumb finds the opening hole immediately, so I have swapped the clip over to this location from the factory position.
Though it is a heavy duty knife, the fineness of the blade has always made me wonder a little. Personally I’ve never had a Spyderco full-flat blade (or any other) fail on me in use, but it is just with the Military 2, the blade is very long. For part of the testing I decided to baton it through pallet wood cross-grain, cutting not splitting. That slicey blade shape just falls through the boards, and comes back out as easily. No gentle tap here, I was full swing pounding on it, and no concerns at all. Obviously it is easy to actually abuse a blade, and I was not trying to do this, but instead just work it hard. It took all this in its stride.

Is the Military 2 true to the original Military model? – Yes.
Is the Military 2 an improvement over the original Military model? – I certainly say Yes.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
No sharpening choil.
The peeled G10 is very abrasive to your pocket.
It makes me want all the different versions of the Military 2.

_______________________________________________
Things I like
_______________________________________________
Compression lock.
It is a Large folder.
Very slicey and pointy blade.
Improved grip shaping over its predecessor.
Phosphor-bronze pivot washers.
Four-position pocket clip.
Full length steel liners.
Excellent factory edge.
‘New and Improved’ – Yes it is.

Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

 
Discussing the Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.

Knife Review: Viper Twin

4 January, 2025

In this Viper Twin review we will be taking a detailed look at this new knife. The Twin is a small and elegant slipjoint gentleman’s pocket knife, especially suitable for every day use. It was designed by Fabrizio Silvestrelli who has been collaborating with Viper for years in the development of new knives.

Each of the Twin’s handles are made from one piece of titanium formed into the body, liner and bolsters, making it very strong, and it is offered with a choice of different colours of scale inserts. You can choose from Dark Matter Gold carbon fiber and the ivory G10 or as shown here, the green Canvas micarta. The Twin also comes with a leather slip case.

The blade is made from M390 stainless steel, an excellent combination of edge retention and corrosion resistance. It is non-locking slipjoint design, and the cutting edge is under three inches long making the knife friendly carry in many places.

What’s in the box?:
This is more of a ‘what would have been in the box’ as I don’t have the box. This knife was a display piece at IWA 2024, so you may see a few marks that would not be there on a new knife, and I have only the slip case and knife.

A good look round the Twin – Things to look out for here are:

This gallery is quite a large one, covering all the main aspects of the Twin. Starting with a detail of the pivot bolt in the integral bolster, moving to the other end of the handle with rear integral bolster and lanyard hole. The spacer/back-spring of the Twin is polished making for a stand out feature next to the matt titanium. The fit of the handle scale, and the one-piece construction of each titanium handle can be seen. My personal preference of phosphor-bronze washers are used for the blade pivot.
Swinging out the blade, initially to the half stop. A drop-point with long swedge gives this a powerful look. Focusing in on a few smaller details on the M390 blade, and into the handle. The final image is of the blade tip with factory edge.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from M390 steel.

Being a slipjoint, the blade’s resistance to opening and closing is a key feature. One of the Tactical Review’s tests is to measure the torque required to open and close the blade, and in here including the half stop. This is done using a force meter and applying it to the blade at a set distance from the pivot.

The final measurements are as follows. A crucial factor you can see in these results is that the closing force is significantly higher than the opening force, making the blade stable during use even though it is non-locking.

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

There are a few more images than I normally include as I found this knife, despite being a show knife, still had some burrs from the factory sharpening. A quick strop would remove them quickly and this edge was very good, so this is out of interest more than anything else.

What is it like to use?

As a non-locking knife I’m able to properly EDC it, and have been carried this knife for a considerable time. My nails don’t like nail nicks, and I always pinch-open the blade of the Twin, which is reassuringly firm in its action. The size is both easy to carry but also substantial enough you don’t feel it is lacking, certainly not for typical EDC use. The wide flat ground blade makes light work of various jobs and slices well.
This gallery shows it in my XL glove-size hands.
In the last two images in this gallery (one of which is included full size at the end of the review) you can just make out the modification I have made, which for me completes the Twin, and that is adding a sharpening choil. I find that small point detail incredibly useful when I’m doing certain cuts so I’ll often add this feature if it isn’t there.

You might have noticed the review ‘feature image’ makes the blade appear very dark, and then in the review introduction, another similar image with the blade full of light. And just below here is another version somewhere between. Of course the blade is very reflective and the changing light gives very different character to the blade. Though the feature image is absolutely real, it is not really representative of how you see the Twin most of the time, it was however striking and interesting looking, so I put it as the headline feature image for that reason.

With the minor modification I made (adding the sharpening choil), the Twin is a firm favourite of mine and will be difficult to displace from my daily EDC.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
No sharpening choil (but I added one).

_______________________________________________
Things I like
_______________________________________________
Reassuringly firm blade retention torque.
Stable construction.
Polished back-spring detail stands out.
M390 steel giving excellent edge retention.
Slim and easy to carry.
Strong wide blade.
Leather slip case included.

Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

 
Discussing the Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.

Knife Review: Extrema Ratio FRAME ROCK XXV Anniversarium

31 March, 2024

Extrema Ratio have been celebrating their 25th Anniversary in style with a number of limited runs of new and old models.

In this review we are looking at the XXV Anniversarium Limited Edition of the overbuilt folder, the FRAME ROCK. If you do miss out on the limited edition, most of the content here is perfectly valid for the standard FRAME ROCK, so limited or standard, you can get one of these ROCK solid folders.

This review of the Extrema Ratio FRAME ROCK includes an in depth video with overview and detailed measurements, plus image galleries and more.

Review Videos

Starting with a short format sixty second review:

Onto a full video review covering many more details:

What’s in the box?:
Included with the Anniversarium Limited Edition, is a special numbered presentation case and Anniversarium challenge coin. In this section, instead of unboxing we are looking at that special presentation case.

The Anniversary Coin:
Before we move on, here are both sides of the Anniversarium challenge coin.

A REALLY good look round the FRAME ROCK – Things to look out for here are:
Unprecedented in size, this gallery contains more photos of details than ever before, to take in as much of this special edition as possible.
Folded or not, the FRAME ROCK is unmistakably Extrema Ratio with its grip pattern. The FRAME ROCK has presence even though it is relatively compact. On the plain head of the pivot bolt there is an engraving of the anniversary logo with a further XXV Anniversarium engraving just above this. Immediately you can see the 6mm thick blade stock with heavy jimping. An integral lock, the FRAME ROCK has a steel insert on the end of the lock bar to increase lock life and it can be replaced if needed.
Extrema Ratio folders use a pivot bolt with locking screw that prevents loosening. Unusually, the deep carry clip wraps completely over the end of the handle, fixed onto the opposite side’s handle. As it wraps over it has a slot to allow the glass breaker to protrude through the clip (this can be fitted on the opposite side).
Waisted spacers hold the handles in place, and give the FRAME ROCK its open back layout.
As the glass breaker is fixed in the solid handle (not the lock bar side), to accommodate this, should you swap the clip side, there is an extra slot in the clip.
Looking right into the pivot, what is visible are the ball bearing cups for the pivot bearings that give the blade a smooth action.

The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from N690 steel.

The Factory edge up close:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

What is it like to use?

A compact, heavyweight, overbuilt knife, it almost seems a contradiction, but the compact size actually allows for a relatively light weight for such a robust knife.
Featuring a beautiful spearpoint blade with fuller, using the same blade shape as the Contact and Contact C fixed blade models. The blade shape adds to the unique look the FRAME ROCK brings.
The more you handle it, the more you understand the allure of the unusual robustness for a knife of this size. Typically, overbuilt folders are much larger, but the FRAME ROCK fits within the hand, while having an incredible solidity – hugely satisfying.
Somehow it also belies belief that such a wide spearpoint could fit into the handle, looking all the more impressive as you swing it open.

For larger hands, the compact handle does mean the clip tends to dig in if you are working the FRAME ROCK hard, and in the left hand, the glass breaker can dig into your hand when taking a tight grip. But trade this off against the overbuilt strength you are carrying, a blade that will take on heavy tasks and not break a sweat.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________
Glass breaker digs into hand when used left-handed.
Thick blade reduces slicing ability.

_______________________________________________
Things I like
_______________________________________________
Incredible robustness for its size.
Stunning spearpoint blade with fuller.
Deep-carry ambidextrous clip.
Replaceable steel lock bar insert.
Pivot-bolt locking-screw to prevent loosening.
Smooth ball-bearing blade pivot.
Thick Titanium frame.
Special numbered presentation case.
Anniversarium challenge coin.

 
Discussing the Review:
Something new – will it work? A Tactical Reviews Subreddit.
TacticalReviewsChat on Reddit
Please visit there and start/join the conversation.