Knife Review: Extrema Ratio Panthera

The Extrema Ratio Panthera is a further development of their T-Razor (that was based on the traditional straight razor) and maintains all the characteristics of the T-Razor, but with a new wharncliffe blade shape and curving claw-like appearance. In this Extrema Ratio Panthera review, I cover all the technical specifications, detailed galleries to show you all the details, a video overview and demonstration of the opening method.

Video Overview

This video is a detailed look at the Extrema Ratio Panthera, from handling to technical measurements. Hopefully something for everyone and you should have a better idea if you should also pick one up.


The packaging:


A good look round the Panthera – Enjoy all the details:


The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from N690 steel.


The Factory edge up close – NEW FOR 2022!:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.


What is it like to use?

One of the distinctive features of the Panthera (and its sibling the T-Razor) is the extended tang used as the blade opening lever. This is the same style as with a friction folder (which being of Roman design actually predates the straight razor by around 1600 years), and allows both opening of the blade, and holding it in the open position. The Panthera also has a liner lock, so the tang is not used to keep the blade open, only to open it in the first place.

Of course the other striking design feature is the curved claw-like blade used in the Panthera, which makes it stand out.

It’s a big knife. I take XL size gloves and the Panthera is a real handful, just take a look at this set of photos.


The opening method is shown a few times in the video at the start of this review, but here are a set of photos to step through opening the Panthera using the T-Razor speed style of opening.


Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

No pocket clip.
No case or holster (in lieu of a clip).
Tang opening doesn’t suit everyone.
Lock release is a bit sharp to push on.

_______________________________________________
Things I like
_______________________________________________

Striking and impressive knife.
Curved blade can increase cutting power for many tasks.
Very comfortable grip.
Blade opens quickly (once you are practiced).
Long handle allows for multiple grip positions.
Matte anodised handle finish feels great.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Knife Review: lionSTEEL Myto

The lionSTEEL Myto is a superb EDC knife designed by Mik Molletta, with Titanium handles, M390 blade and a removable flipper tab. The version on test has a black stonewashed finish on the handles and blade. Join me in this review of the lionSTEEL Myto for a really detailed look over the design and technical specifications of this excellent EDC knife.

Video Overview

This video is a detailed look at the Myto, from handling to technical measurements. Hopefully something for everyone and you should have a better idea how the knife handles.


A few more details:

What’s in the box?:
Arriving on lionSTEEL’s ‘recyclable’ packaging, this is how it arrives.


A good look round the Myto – Things to look out for here are:
Overall fit and finish is flawless, even with the unforgiving close up photos. As you go through the gallery you will see the details of form (such as round the lock bar spring, or pocket clip, or lanyard hole, or flipper tab etc.) One detail you have to look closely for is the hidden stop pin which is just visible in one of the images. This version in the stonewash finish gives it a nice soft look, ready to be put to use.


The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

The blade is made from M390 steel.


The Factory edge up close – NEW FOR 2022!:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

Though not the best BESS sharpness measurements, this close up of the edge shows the texturing in the edge that makes it really cut well.


What is it like to use?

Inobtrusive and easy to carry are a couple of first impressions which make a great EDC knife. One thing I wasn’t so sure about when I first picked up the Myto was the solid pocket clip; it seemed too stiff and like it would be difficult to use. I’ve been proven completely wrong on that as actually the clip eases over the edge of a pocket without a struggle, but then is a bit harder to take off, so making it secure.


With the blade on bearings, the flip open is super slick, as you can see in the video. It really doesn’t take any effort at all to flip to the locked position and you can develop a nice slow lazy flip with the blade reliably locking, or really snap it out. The detent if firm without being harsh so you never have to fight with it.

It’s not the first lionSTEEL with removable flipper tab, and you might question the benefits of such a feature. Consider the pros and cons for a flipper. As pros, you might have fast deployment, and built-in finger guard. As cons, one of the most frequent complaints it the messy tab sticking out and the action appearing like a flick knife and in many places or situations causing distress to non-knife people.
So if you want a sleeker looking knife, and one which requires a steady and inoffensive two-handed opening, you undo one screw and off comes the flipper tab. You can then change your mind, just want to mix it up again, or go fidget flipping and on goes the tab.
I did find the tab itself was not perfectly in line due to the removable system, and in trying to get it lined up better I over torqued the supplied tool and started to twist off the end of the torque driver, so beware of this when refitting the tab.
If you have the facility you will likely use it, giving you two slightly different knives in one. I have several folders I wish had the same feature.


In terms of size, the Myto fits in very well in the 3/3.5″ blade length category ideal for general purpose every day tasks. The strong lock and flipper tab/finger guard allow you to work hard with this knife.

I take an XL size glove, and in my hand I can take a full grip and the handle is large enough so that my hand doesn’t have the corners of the butt digging in, instead just extending slightly out of my hand. At the front, the flipper tab acting as a finger guard, keeps the position of the knife safely under control. Just right.


lionSTEEL’s superb engineering stands out the moment you pick up the Myto with absolutely nothing seeming out of place or ‘could be better’, instead everything just being right. Refined, easy to carry and strong blade with great slicing power.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

Flipper tab is slightly wonky due to removable system.
Easy to over-torque the supplied tool.
Solid clip feels very stiff.
Glass breaker is scratchy.

_______________________________________________
Things I like
_______________________________________________

Quality engineering.
M390 blade steel performance.
Excellent EDC size of knife.
‘ReF’ Removable Flipper tab system.
Elegant and refined design.
Blade geometry makes for a great slicer.
Solid and slick blade action.
Clip can be fitted for left or right handed use.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Light Review: Fenix PD36 TAC

In this review of the Fenix PD36 TAC, I’m going to be taking a detailed look at the details, comparing its performance to the specifications, checking out the beam and how usable it is. The review includes video content as well as photo galleries and technical testing results.
Join me in this look over the Fenix PD36 TAC Flashlight / Torch, a light built around the increasingly common larger 21700 cell (compared to the typical 18650 previously used). This has a specialised tail-cap with physical lockout, dedicated ‘Tactical’ setting, and a normal ‘duty’ multi-mode setting.
Let’s get to really know the Fenix PD36 TAC!

Video Overview

Starting out with the video overview of the PD36 TAC.


What is in the box?:

Unpacking the PD36 TAC and its accessories.


Taking a more detailed look at the holster:

Before moving onto the PD36 TAC itself, this is a run round the supplied belt holster.


A good look round the PD36 TAC – Things to look out for here are:
In the gallery are details of the design, the clip, bezel, contacts, threads, battery, and more…


The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and my wife won’t have one!

Below are the indoor and outdoor beamshots giving you an idea of throw and spill. The PD36 TAC has a great balanced beam with great area lighting.


Batteries and output:

The PD36 TAC runs on the supplied 21700 USB-C rechargeable cell.

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

Measured output is a great match for the specifications.

For the runtime graphs, I have included runs for Turbo and Tactical, which have different starting outputs. Also included is a graph of the first six minutes to better show the difference between Turbo and Tactical modes.


The PD36 TAC in use
The general change towards using 21700 cells is great for two reasons; better runtime/output and a comfortable size to hold. If you were completely unaware of the reason the battery tube was larger than previous generations that run on 18650, you would just be thinking the PD36 TAC is nice and comfortable to hold. The fact that it now houses a 21700 cell with that 5000mAh capacity is a further bonus to the comfort in the hand. Win win at this point.

With that greater capacity of the 21700 cell, this compact tactical light can pump out a huge 3000lm. Go back and look at the runtime graphs to see how impressively the PD36 TAC keeps its output going. The output limitation is more down to thermal capacity for longer runs.

This is the first of this style of Fenix tactical tail-cap I have been able to try. It has three functional modes. One is a simple and solid physical lockout. Line the selector ring up with the padlock, and the button does not move.

The selector ring certainly feels secure enough in its positioning that you won’t be accidentally going between locked and unlocked by accident. You pre-select the type of use you want and leave it there. Bear in mind, you can also use this to lock the PD36 TAC on. If you first turn it on to a mode you want and then rotate the selector ring to the padlock, you can’t turn it off again.

Being designed as a ‘Tactical’ light, most users will likely keep it in ‘Tactical’ mode – instant 2000lm output with momentary or latched action. Half press the tail-switch for momentary output, complete the press to latch it on (or just go for the full press to start with). Holding the switch fully in for about 1s and you enter strobe mode.

Move the selector round to the ‘Duty’ mode and you have access to five different output levels. Starting on ‘eco’ the first time you use it, but after that the last used level is remembered. Changing modes requires a half press – this can either be a half press from off and then cycle through modes before latching on, or a half press after turning the PD36 TAC on with a full press, the half presses then cycling through modes. Personally I would have preferred an automatic reset to eco after a few seconds being off as after not using it for a period of time, you won’t know if you had eco or turbo set, and this could be quite a shock.

The Fenix PD36 TAC is a purposeful lighting tool, and can instantly be reconfigured as either a dedicated ‘Tactical’ light or into a multi-mode ‘Duty’ light to fit with your needs.


Review Summary
The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that covered in the review.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

‘Duty’ mode last used level remembered (so could be on eco or turbo).
Tail-switch has a relatively stiff action.
No grip ring provided.

_______________________________________________
Things I like
_______________________________________________

Great area lighting beam profile.
Nearly 3000lm from a compact light.
Three function tail-cap selector ring.
Dedicated ‘Tactical’ mode.
Proper physical lockout.
Uses a large capacity 21700 cell.
Supplied cell has built-in USB-C charging.
Very usable holster supplied.

Classic Knife Review: Spyderco Police and Military Models

We all know them, we might not all have them. These two Spyderco classics (Police and Military) have stood the test of time and use, and are still current models – for good reason.
I refer to them as ‘Classics’ and Spyderco calls the Police model a ‘Signature’ model and the Military a ‘USA Made’ and/or ‘Save and Serve’ model. Both really qualify as a classic in my opinion and are worthy of being in your pocket.

Video Overview

This video is a detailed look at the Police and Military Models, from handling to technical measurements. Hopefully something for everyone and you should have a better idea if you should also pick up one or both.


A good look round the Police Model – Things to look out for here are:
Being of full stainless steel construction, and having brushed steel handles, to ensure you get it in new condition, the handle scales come with protectors fitted that you need to peel off.
The Police model has drilled and tapped holes in all four possible clip positions, so you can decide the very best clip position for your needs (personally I changed this to tip-up and right handed).
Being a long standing model it unsurprisingly uses a back lock.
With a rivet type of blade pivot, there is no adjustment or user servicing possible. The pivot rivet finishing is excellent and completely invisible.
This example is the part serrated version, but it also comes in a fully serrated or full plain edge blade.


A good look round the Military Model – Things to look out for here are:
Immediately unmistakably Spyderco, with the G10 handle scales, pocket clip and opening hole, the Military is a good sized folder.
Unlike the Police model, the Military can be taken apart, with the G10 handle scales bolted together and a pivot bolt. Also unlike the Police model, the Military has only the one clip position (tip-down right handed).
Recessed into the G10 handles are minimal steel liners and the Military uses a liner lock. Just to drive home that point about ‘minimal’ steel liners, this is what allows for the light weight yet still strong construction. The liner on the non-lock side just goes from handle bolt to handle bolt to the pivot (supporting the stop pin as well). The other partial liner is larger as it includes the lock bar.


The Blade and Handle – Detailed Measurements:
For full details of the tests and measurements carried out and an explanation of the results, see the page – Knife Technical Testing – How It’s Done.

An extra detail not in this table is the edge angle of the serration on the Police Model. One of the reasons the Spyderco serrations cut so well is that they are chisel grind (so only one side is sharpened) making the edge angle very fine – in this case just 17 degrees total inclusive edge angle (0 degrees one side and 17 the other).


The Factory edge up close – NEW FOR 2022!:

Followers of Tactical Reviews will know my views on factory edges, but to recap:

Anyone using a knife will need to sharpen it. That first factory edge is just like the first tank of fuel that a new car comes with (or first charge of the battery).
A good factory edge is a ‘nice to have’ but not a ‘make or break’ for a good knife, as you will be putting your own edge onto it soon enough.
The factory edge does however indicate the care a knife maker has put into the final finish.
It is for this reason Tactical Reviews measures factory edge sharpness and specifications, and includes this information in the detailed technical testing.

As a further look at the factory edge, this section has been added to include some high magnification photos of the factory edges.

In this case the serrated part of the Police model (the plain edge part was sharpened before the imaging device was ready) and the edge of the Military model.

These two edges are outstanding and will the standard by which others are judged!


What is it like to use?

Before going further with using them, a quick side by side (and one on top of the other) size and form-factor comparison.


Moving onto the two knives in the hand, and despite being very similar in size, they do feel very different when you hold them. The G10 handles of the Military make for a different weight distribution plus fill the hand more. Of the two, the Military is definitely the more comfortable and easy to have a very secure grip of. Conversely though this makes it harder to carry, taking up more pocket space. The Police model is very slim and even at the size it is, slips into your pocket so easily.


In terms of carry, the Police model also gives you all four possible clip positions (or five if you count – ‘no clip’) so there isn’t any limitation of the clip position. Although that said, this current version is missing a lanyard hole if you wanted one of these.
For my own purposes, I have moved the clip from the factory position to tip-up and right handed.

Of course for edge maintenance, especially considering the serrated edge on the Police model, the Spyderco Tri-Angle Sharp Maker (also pictured above) is ideal and easy to use.

Both the Police and Military models do have a very pointy blade tip, the Police being the slightly pointier of the two. It makes them very aggressive at penetrating, and for anyone more used to a drop point or other less eager blade tip might find them unwieldy or difficult to control. You certainly need to use great care where depth of cut matters, and the long blade can make this control all the more difficult. You will get used to it, but it does need care and consideration when wielding these super capable blades.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

Military –
single clip position.
clip/G10 abrasive on pocket edge.

Police –
no lanyard hole.
slippery when wet.

_______________________________________________
Things I like
_______________________________________________

Military –
Very light for its size.
Very ‘eager’ blade (full flat grind and sharp point).
Liner lock makes for very smooth opening.
G10 handles have excellent grip.
Spyderco high quality fit and finish
One of the best factory edges I have ever seen!

Police –
Slim design makes it easy to carry.
Pocket clip has four possible positions.
Spyderco serrations incredibly sharp.
Three options for blade (plain, serrated, part-serrated).

Hope to see you at IWA 2022 soon!

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)

Light Review: Cyansky H3 and H5 (built-in Red/Green Filter)

Cyansky have come up with a novel way to solve the problem of having multiple colours of light in a single device without many of the compromises multi-LED or LED swapping lights might have. Most people will have come across, or used, colour filters to change the output of a white beam, but these are easily forgotten or lost. In the Cyansky H3 and H5 hunting models, glass filters are completely contained within the head of the light and the patented mechanism lets you drop a red or green filter in front of the XHP35 HI LED with a simple twist of the control ring – nothing else needed. The H3 and H5 use the increasingly popular 21700 cell to provide more power and runtime, but can run on an 18650 or 2 CR123s for added versatility.
Join me in the detailed examination of these two hunting lights and see how they perform.

Video Overview

Starting with a look over these light in a short video.

This is what arrived from Cyansky –

A good look round the H3 – Things to look out for here are:
As you may have already seen in the video, first up are the contents of the box. The H3 has a belt hanger (rather than full holster) providing a head-up belt carry option. Moving round the H3 and we get onto the mode switch and filter control ring at the base of the head. The tail-switch is semi-recessed, so allowing for tail standing, but with cutouts to ease access to the switch. The stainless bezel ring is wide and well finished. And then a first look at one of the filters.
The H3 comes with a 21700 with built-in USB-C charging. As it arrives there is a plastic insulator to prevent accidental discharge in the light.


A good look round the H5 – Things to look out for here are:
With the H5, the details are the same as for the H3, so I won’t repeat them, the difference is in the much larger head and reflector to give extra beam range.
One small observation which doesn’t affect function at all is that the mode switch has room to move about and twist, so might look a little ‘off’. This doesn’t affect function at all, and is only mentioned in case you see the button looking slightly twisted (this is the same for both models).


The Remote Switch and scope mount:
The supplied remote switch replaces the tail-cap of either the H3 or H5. The remote switches are in a rail-mount unit, and you have a momentary only switch, plus a forward clicky latching switch much like the original tail switch.
The scope mount is basic and easy to use, but I would not use it for heavy duty setups. For smaller calibers and for quick tool-less mounting it works well, and has enough stand off for the H3 or H5.


The Cyansky special feature – built-in colour filters:
Now for a set of images to just show the built-in filter change. I’ve used the H3 here as with the smaller head it is easier to see the filter better than with the H5. First no filter – with the filter holder just having a little bit of extra reflector round the base of the LED. Then part of the way to dropping a filter in place (this is NOT how you use it, just showing the filter holder disk rotating). Finally with the red and green glass filters shown in place over the LED.


The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and my wife won’t have one!

Stepping through these beamshots we have the H3 white beam, then H5 white beam, and as you go through the gallery it is H3 then H5 to show a direct comparison on each colour indoors and out.


Batteries and output:

The two models runs on 21700 cells. Logging the built-in USB-C charging gives these traces for the cell provided with each light.

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

The Output table also includes the manufacturer specified lumens for comparison.

For the runtime trace, only the highest and lowest output colours were used (white and red) and all traces were run on maximum power.


The H3 and H5 in use

The first aspect to mention is how the H3 and H5 themselves compare. Actually this photo doesn’t show it accurately, but from the control ring to tail-cap, the H3 and H5 are identical. Not a surprise as they run on the same cell, have the some output specifications (apart from beam range), and have the same controls. So when holding them, they are the same for grip and controls.

With the larger head, and larger reflector, the H5 does have the edge in overall output, and it focuses the beam more for a longer reach. This gallery shows some longer distant photos on a golf course driving range. The H3 and H5 beams compared directly. The focus of the H5 is clearly visible at these longer ranges.


Using a zoom rifle scope this gallery has a set of images at the same exposure to show the gain in distance the H5 has over the H3. The magnification is set to 8x in this first gallery.
Important to note is that the distance markers the scope is aimed at are 250 yards, and that the H3 is still usable on white output, but struggles a bit at this range on the coloured output.
Also bear in mind that I am using a .22lr on this course, so 250 yards it beyond the limit I would take a shot.


Now taking the scope to 16x magnification. Although all the images here are the same exposure, I have had to use a longer exposure than for the 8x magnification. At this range and magnification the H3 was pushed too far. the H5 was still working well.
This was to test the limits for range and scope magnification. (At 32x magnification I could not get any photos to come out.)


All of the above proves the H3 and H5 work well on or off a rifle, and the coloured output filters, being built-in, are so convenient, allowing for changes of output colour with nothing but a turn of the control ring.
Although I normally use dedicated coloured lights (so the LED is red or green) due to being most efficient and having the best quality of beam, it means I need to carry entire replacement lights to change colour. There are also LED swapping lights on the market but these compromise the thermal path as the heat sink has to move. With the H3 and H5, the single LED has an optimal thermal path for heat sinking.
Using filters on any light does reduce efficiency as you are ‘wasting’ up to 93% of the actual output (in the case of the red 1306lm down to 94lm). This is the cost of the convenience of instant access to red green or white light.

As long as you have a suitable rail to mount the remote switch on, this switch works really well. By including both a dedicated momentary switch, and a latching forward-clicky switch that gives you momentary and permanent on options, you have all you might want. If you don’t have a rail in the right place, this switch won’t really work for you, so consider this before choosing.

If you normally use a dedicated coloured light, then do you switch to the H3 and H5? – if you ever have a need to change between red, white, and green, then the all-in-one solution these Cyansky lights give you allows you to stop carrying additional separate lights.
If you use, or would consider using colour filters, then the H3 and H5 are no-brainers. Why would you want external filters you can lose, that are often a plastic filter material, when you can have self-contained selectable glass filters?

Review Summary
The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that covered in the review.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

Using filters is not efficient compared to dedicated coloured lights.
The mode button can look a little twisted as it has a little too much room to move.
Basic belt hanger provided.

_______________________________________________
Things I like
_______________________________________________

Glass filters are used.
Simple turn of the control ring to change filter colour.
21700 power (plus can use 18650 or CR123 if needed).
Supplied 21700 is USB-C chargeable.
Good choice of beam pattern between the H3 and longer reaching H5.

You can find the Official Cyansky Store Here, if you would like to get hold of these lights. (I have no affiliation and get no reward for you buying from this link).

Tactical Briefcase Face-Off Part 4: The Results

Part 4 of the Tactical Briefcase Face-Off is all about the results! All three Tactical Briefcases in the Tactical Briefcase Face-Off series came from Military 1st who I’ve been buying from for many years.
This series of reviews was originally planned to be a single group review, but has evolved into something much larger as I used each of them for EDC, lived with them, got to know them well, and more and more needed to be shown. In parts 1-3, each of the three Tactical Briefcases (First Tactical Executive Briefcase, Hazard 4 Ditch Bail Out Bag and Condor Metropolis Briefcase) has been shown in detail, and now in Part 4, it all comes together to explain how I got on with each one and their strengths and weaknesses.

Part 1, featuring the First Tactical Executive Briefcase can be seen here.
Part 2, featuring the Hazard 4 Ditch Bail Out Bag can be seen here.
Part 3, featuring the Condor Metropolis Briefcase can be seen here.

The video tour of all three Tactical Briefcases:
In case you haven’t seen the video overview on Tactical Review’s youtube channel, here it is. This video covers all three of the bags.


Part 1 – The First Tactical Executive Briefcase:
The story of this Tactical Briefcase Face-Off series of tests starts with the bag in Part 1, the First Tactical Executive Briefcase.
These briefcases all have to follow in the footsteps of my established 20l EDC backpack. Over the years, this 20l class of backpack has fitted in nicely with my EDC needs, and the most recent of these being the Wisport Sparrow 20 (also reviewed here).

Taking this as my optimum starting point, all the Tactical Briefcases would need to measure up in terms of capacity, storage and function.
We all carry a variety of gear, and I just went with what I actually do EDC rather then contriving a test. Laying it all out ready to move over to the First Tactical bag, this is what I currently carry, and I’m not even going into the contents of the two organiser pouches in there.

So it’s all moved over, and there is room to spare, an easy and straightforward bag move; immediately feeling comfortable and reassured the bag will stand up to use.

Then I EDCed this bag for two weeks before considering a swap to the next.
At this stage where I didn’t have any comparison of using the other bags, I could only consider the first impressions of this one on its own. Sturdy and comfortable would be the words that come to mind. The well padded strap made carrying it very easy despite now having only a single strap compared to a backpack with two. The strap is also super stable, and doesn’t slip off the shoulder thanks to the rubberised grip-strips on the strap pad. On the floor it is nice and stable in the upright position, and the double-zipped top flap makes for very easy access to the main compartment, just make sure you put the most needed items near the front of the compartment.
The well made handles also add to the sturdy feel of the bag and when carrying with the handles they feel very strong. I keep a 10″ tablet in the laptop section rather than a laptop, and this only needs one side of the padded section, easily accessible with the twin zip.
With all the compartments using zip closures, noise levels are low when getting bits and pieces out, although when carrying it is prone to a bit of strap buckle squeaking from the swivels.
A strong start to the face-off series.

Part 2 – The Hazard 4 Ditch Bail Out Bag:
Hazard 4, oh Hazard 4, I do like Hazard 4 quality, so wanted this to be my favourite. I always try not to allow any bias into my assessment of gear, so had to have strong words with myself on how I was going to view this one.
Of the three, the Hazard 4 was the only one not to come with a shoulder strap. I understand why, but actually don’t think it is right that it doesn’t, considering the price point. There isn’t much choice in matching shoulder straps, really only two, the one on test, and a version with additional stabilisation strap that clips onto another loop on the bag. As a separate item, the strap is however of a quality that justifies it being an item itself, and not something made to fit within the overall pricing.
The use of a different fabric on the bottom that is waterproof and wipeable is a great touch and gives the impression this bag will definitely go on and on.

On swap-over day; laying out everything ready to move it over.

Slightly surprisingly, it was a bit more of a challenge to fit everything in, with the bag developing a bulge on the admin panel side. This, combined with the padded laptop compartment on the opposite side being quite rigid and stiff, gave the bag an imbalance and it seems to want to topple over rather than sit upright. This tendency continued throughout the fortnight it was in the EDC rotation, and was somewhat annoying. It was as if the laptop section was a bit too big for the side of the bag, which also impacts on the carrying capacity.

Reliability was never in question, and the strap made it comfortable to carry. Both because the contents seemed to fill it more, and the lack of capacity to take any top-up EDC items, made it appear smaller than the First Tactical bag. This was also noticeable while carrying it; I did not knock into door frames or walls with it (as much), so carry was easier, and more streamlined.
With the admin panel being the whole side, instead of a couple of smaller pockets, it was not as easy or convenient taking out a few bits a pieces. It would be more suited to a kit of items where you need to see them all at once to pick the one you want.
The main compartment however was very usable, with the internal end pockets, pockets on one side and a versatile webbing panel on the other. Access is quick and easy with the lightweight double-zip flap top.

Part 3 – The Condor Metropolis Briefcase:
And the transfer day for the last bag in this series after two weeks with the Hazard 4 – the Condor Metropolis Briefcase. A quick pre-transfer comparison, with the Condor looking like it might be quite similar in capacity to the Hazard 4.

Ready to start packing everything away to get it to all fit in the right way for my regular needs. By this stage I was finding that it is quite a challenge to keep reorganising gear you use all the time after having just got more or less used to where it was in the previous bag. The different pouches, pockets, sections make you rethink where things need to go.

The Condor had no issues accommodating everything without bulges or struggling at all and it is sits upright happily on the floor. The sharp eyed might have spotted in the bag contents there is a large admin pouch in coyote, and this is a Condor too.
In this bag, more Velcro closures are used than the previous two. When in the workplace, ripping these open does make quite a bit of noise and attracts attention. Velcro also has the tendency that once you take one thing out, if the flap falls closed by itself, you then have to rip it open yet again to get item two out. One of the front pockets does have a zip for part of its compartment, but then Velcro for the other part, and the second front pocket is fully Velcro.
Access to the main compartment in this bag is via a single zip requiring you to ‘dig’ a bit more to find things as the compartment is not as openly presented as those with a double-zip flap opening.
The main compartment having only two mesh pockets is simple in structure. Mesh pockets don’t provide much protection for what is in them, or what is on the main compartment, but the mesh does mean it is really easy to see what is in which pocket without a rummage. It really depends on what you carry for how well they suit your needs. In my case I have several items that partially poke through the mesh if I’m not careful.
For the first time in this series, I noticed some discomfort with the shoulder strap, but remember I do have this loaded up and the pouches I carry contain many tools, so can be pushing 10kg. With a slightly lighter load this would not be an issue.

And I was wrong:

After using all three bags, I was convinced that there was a big difference in their empty weight. I was clearly wrong, with this quick gallery of using luggage scales to weigh all of them. So it was purely an impression based on structure, build and materials. (These are in the same order as the previous parts, so it is the Condor that is a touch lighter.)


Review Summary
And here we are now, where having used each of these three bags for a minimum of two weeks EDC, and looked at them in detail, I can come to a conclusion. The conclusion I can come to is only for my own EDC, as our choice of EDC is entirely personal.
On the way to reaching this point I hope to have given you enough information to find one that would suit your needs, with the video tour, individual detailed feature reviews, and the comments and impressions I’ve described earlier in this part of the face-off.

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that covered in the review.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

First Tactical – Can seem a bit big.
First Tactical – Strap squeaks a little when walking if heavily loaded.
Hazard 4 – A bit unbalanced and tending to topple over on the floor.
Hazard 4 – Strap needs to be purchased separately.
Condor – Main compartment access restricted by single zip opening.
Condor – Strap has less padding so is not as comfortable with heavy load.

_______________________________________________
Things I like
_______________________________________________

First Tactical – Easily has room for additional top-up items.
First Tactical – The most comfortable and stable strap.
First Tactical – Comprehensive pockets, pouches, all with easy access.
Hazard 4 – Super build quality (the others are great, but I’d put this ahead on build).
Hazard 4 – Lots of versatile webbing.
Hazard 4 – Large admin panel packed with features.
Condor – Great all-rounder with simplified main compartment.
Condor – Concealed compartment (easily accessed by pulling the front D-loop).
Condor – Drainage holes in elasticated end pockets in case of leaks.

In short, all of these Tactical Briefcases stand on their own merits. If I had purchased any one of them on its own, it would have done the job, and I would have been happy. You won’t go wrong with any of them, but if you have any specific requirements, take a look back over the details to see which would be the better fit.

For my uses, and the gear I EDC, one of them was a better fit, and is currently serving as my EDC bag…

Tactical Briefcase Face-Off Part 3: Condor

Part 3 of the Tactical Briefcase Face-Off features the Condor Metropolis Briefcase (see it here) and takes a detailed look round this contender. All three Tactical Briefcases in the Tactical Briefcase Face-Off series came from Military 1st who I’ve been buying from for many years.
This series of reviews was originally planned to be a single group review, but has evolved into something much larger as I used each of them for EDC, lived with them, got to know them well, and more and more detail needed to be shown. Each of the three Tactical Briefcases (First Tactical Executive Briefcase, Hazard 4 Ditch Bail Out Bag and Condor Metropolis Briefcase) will have a dedicated article before the final article, Part 4, brings it all together to explain how I got on with each one and their strengths and weaknesses.

Tactical Briefcase Face-Off Part 1, featuring the First Tactical Executive Briefcase can be seen here.
Tactical Briefcase Face-Off Part 2, featuring the Hazard 4 Ditch Bail Out Bag can be seen here.

Part 3 – The Condor Metropolis Briefcase:

All round the outside:
We’ll start with a run round the outside. – The Condor Metropolis Briefcase includes a shoulder strap which is tucked into the main compartment when it arrives. The front panel has two main pockets with a patch panel / MOLLE panel on one and an extra clear ID holder pocket on the other, and there is a handy D-loop in the middle for clipping keys etc to. The back panel has a large zip up pocket and a trolley bag handle loop strap for sitting the Metropolis Briefcase onto a larger wheeled bag with telescopic handle. Each end panel has an elasticated pocket with webbing for MOLLE pouches.


Pockets, Pouches, and Padding – Things to look out for here are:
Starting off with one of the end panel stretch pockets, here I’m using a pocket knife to prop it open so you can see the construction. Of the two front pockets, one has a Velcro flap, and the clear ID pocket on the other also has a Velcro flap closure. Inside that first pocket there are a couple of elastic organiser loops. The other pocket with ID holder, uses a zip to close it. Inside it has a set of organiser pockets of different sizes and a key hanger. Behind those front panel pockets is a full width pocket with internal Velcro mounting panel.
On the rear of the bag is a thin zip-up plain pocket. Behind this is the padded laptop storage compartment with a full double zip opening. Inside the laptop compartment are two pockets, the larger of which has a retaining strap to keep the laptop in place.
Accessed via a double-zip opening (but not using a flap like the other two bags), the main compartment has a Velcro-loop panel on one side, and two zip-up mesh pockets on the other side.


Strap and Handles:
There are two simply constructed carry handles, and one has a Velcro grip-wrap to hold them together. The shoulder strap has a removable sliding pad, and each end attaches to the bag with a side-release buckle. On one end of the strap there is the female buckle, and the other end has the male buckle – this means that you will always put it onto the bag the same way, and that strap can be made into a loop by clicking the ends together and used in other ways.


The video tour of all three Tactical Briefcases:
In case you haven’t seen the video overview on Tactical Review’s youtube channel, here it is. This video covers all three of the bags.


Review Summary
As in Parts 1 & 2 there is a lot to absorb, so this is where we will leave the Condor Metropolis Briefcase for now.
Please follow the series of articles to see all the insights, and it will be in part four that the real-use feedback will be included.

Tactical Briefcase Face-Off Part 2: Hazard 4

Part 2 of the Tactical Briefcase Face-Off features the Hazard 4 Ditch Bail Out Bag (see it here) and takes a detailed look round this contender. All three Tactical Briefcases in the Tactical Briefcase Face-Off series came from Military 1st who I’ve been buying from for many years.
This series of reviews was originally planned to be a single group review, but has evolved into something much larger as I used each of them for EDC, lived with them, got to know them well, and more and more detail needed to be shown. Each of the three Tactical Briefcases (First Tactical Executive Briefcase, Hazard 4 Ditch Bail Out Bag and Condor Metropolis Briefcase) will have a dedicated article before the final article Part 4 brings it all together to explain how I got on with each one and their strengths and weaknesses.

Tactical Briefcase Face-Off Part 1, featuring the First Tactical Executive Briefcase can be seen here.

Part 2 – The Hazard 4 Ditch Bail Out Bag:

All round the outside:
The Hazard 4 bag differs from the others on test in that it doesn’t come with a shoulder strap. The introduction image shows the bag and strap separately as they must be purchased separately. However, the consideration for this is that Hazard 4 do have a few strap options, so this does allow you to either not bother at all, or choose one to best suit your needs.
We’ll start with a run round the outside. – The front panel is a large MOLLE platform limited only by your imagination. The back panel has a trolley bag handle loop strap for sitting the Ditch Bail Out Bag onto a larger wheeled bag with telescopic handle. There are also wide webbing buckles allowing you to add extra straps to hold larger items onto the bag. Even the top flap is equipped with webbing attachment loops.
The base of the bag is a different nonabsorbent material which should be better at shrugging off wear and dirt from being on the floor. Each end of the bag has a small elasticated pocket and more webbing.


Pockets, Pouches, and Padding – Things to look out for here are:
Opening up the full size front section reveals a big admin panel crammed with organisation features; a clear document wallet, zip-up pocket, full width pocket, then various size organiser pockets, with two straps to stop the front section opening further than shown in the gallery.
To the rear of the bag is the single section, well padded, laptop pouch with double zips so you can open it either end or either way. This laptop pocket is lined with a soft quilted fabric.
The top flap has lots of details that make it very usable. At the end there is a small grab handle so you can pull it open in one motion. There is a zip either side of the flap and these can be joined with a small loop strap, or one end unhooked to allow them to move independently. So that the flap doesn’t end up on the floor, there are Velcro panels so the front of the flap can be folded in half and attached to the other end of the flap when fully open. This keeps it neat prevents it from getting under foot.
Comparatively, the main compartment has less going on; four pockets and a MOLLE platform on one side.


Strap and Handles:
As a completely separate item, the shoulder strap here is the one Hazard 4 recommended for the bag. It is a general purpose 2″ shoulder strap which has swivel clips and a removable pad.
The two carry handles on the bag are simple and comfortable, and have a Velcro grip-wrap to hold them together.


The video tour of all three Tactical Briefcases:
In case you haven’t seen the video overview on Tactical Review’s youtube channel, here it is. This video covers all three of the bags.


Review Summary
As in Part 1 there is a lot to absorb, so this is where we will leave the Hazard 4 Ditch Bail Out Bag for now.
Please follow the series of articles to see all the insights, and it will be in part four that the real-use feedback will be included.

Tactical Briefcase Face-Off Part 1: First Tactical

Part 1 of the Tactical Briefcase Face-Off features the First Tactical Executive Briefcase and takes a detailed look round this contender. All three Tactical Briefcases in the Tactical Briefcase Face-Off series came from Military 1st who I’ve been buying from for many years.
This series of reviews was originally planned to be a single group review, but has evolved into something much larger as I used each of them for EDC, lived with them, got to know them well, and more and more detail needed to be shown. Each of the three Tactical Briefcases (First Tactical Executive Briefcase, Hazard 4 Ditch Bail Out Bag and Condor Metropolis Briefcase) will have a dedicated article before the final article Part 4 brings it all together to explain how I got on with each one and their strengths and weaknesses.

Part 1 – The First Tactical Executive Briefcase:

All round the outside:
Starting with a run round the outside. This is how it arrived, so the shoulder strap is tucked away inside the bag. Already you see how well equipped this tactical briefcase is going to be.


Pockets, Pouches, and Padding – Things to look out for here are:
As well as fixed storage, the First Tactical bag has an expandable pocket at each end with mesh sides. These are perfect for water bottles or other larger items you don’t carry all the time. There is so much storage in these bags it is easy to lose track of where you are looking.
Working through the gallery, after the end pockets, then we have the rear compartment. This is on the side of the bag with the trolley bag handle loop (so you can sit it onto a trolley bag with the loop holding it in place when slid over the handle). This double-zip rear compartment has two sections in it one of which has a panel of ‘Velcro loop’ for fixing items to.
The front of this bag has two separate zip-up pockets with internal organisers. (Not shown here, but is in the video – just behind the front pockets is a Velcro-closed full width pocket.)
In the middle of the main compartment flap is a pocket which might be used for storing glasses. The end of this flap has a Velcro closer that can be folded back on itself to keep it out of the way.
Onto the laptop section, which is to the rear of the bag, but on the inner side of the carry handle. It has multiple compartments as shown, and a strap to secure the laptop when fitted.
For the main compartment, the main flap has twin zips that can be disconnected to allow each side of the flap to be opened separately. One side of the main compartment has a full width pocket, and the other side has three smaller pockets.


Strap and Handles:
Should you wish to use this bag without a shoulder strap at all, the mounting system allows for one of the neatest and lowest profile residual fittings I’ve seen. As delivered, one end of the strap has been disconnected, so you need to fit the loose end or remove the already fitted end if you don’t want the shoulder strap. First Tactical have use a very slim karabiner style clip which has a sprung gate to both keep the clip in place and carry some of the load if the bag is heavy.
Also of note on the shoulder strap there are two rubberised patches to help prevent any shoulder slippage.
The two carry handles are simple and comfortable and don’t have one of those wraps to hold them together.


The video tour of all three Tactical Briefcases:
In case you haven’t seen the video overview on Tactical Review’s youtube channel, here it is. This video covers all three of the bags.


Review Summary
As you can see the design is so feature packed it needs time to absorb all the details, so to avoid overload, this is where we will leave the First Tactical Executive Briefcase for now.
Please follow the series of articles to see all the insights, and it will be in part four that the real-use feedback will be included.

Light Review: Fenix WT16R and WT20R

I’ve always liked functional lights, those lights that not only give you light, but give you various options for positioning and types of light. Typically they are not the mega-lumen monsters, instead with more modest outputs, but with a focus on utility. One of the latest releases from Fenix is the WT16R which compliments the existing WT20R model, and this detailed review is of the Fenix WT16R and WT20R from the ‘WT’ Work Light series.

A ‘First Look’ Video of the WT16R and WT20R:


A good look round the WT16R – Things to look out for here are:
The WT16R on test is actually a pre-production model (but of the final construction), so did not have any packaging. It has a fully fixed body where nothing moves or opens, and has a non-removable built-in USB-C rechargeable cell. The WT16R has a main spot beam at the front and a large side panel to provide area flood lighting (and a flashing amber option). A clip and two magnets allow for various mounting options, and the design allows for free-standing use as well, plus it definitely won’t roll away.


A good look round the WT20R – Things to look out for here are:
An articulated head, how I love an articulated head. The WT20R has me straight away on that one alone. But then it much more; look out for the illuminated side switch, metal bezel, twin beam types and dual-fuel ability with the supplied li-ion and you can also fit it with AAs (not provided).


The beam

Please be careful not to judge tint based on images you see on a computer screen. Unless properly calibrated, the screen itself will change the perceived tint.

The indoor beamshot is intended to give an idea of the beam shape/quality rather than tint. All beamshots are taken using daylight white balance. The woodwork (stairs and skirting) are painted Farrow & Ball “Off-White”, and the walls are a light sandy colour called ‘String’ again by Farrow & Ball. I don’t actually have a ‘white wall’ in the house to use for this, and my wife won’t have one!

For each of the following galleries the exposure was set to the same to directly compare the two beam types from each light.

WT16R Beamshots
(The WT16R’s flashing amber mode is not represented here.)


WT20R Beamshots


Batteries and output:

The WT16R runs on a non-removable built-in USB-C rechargeable cell, and the WT20R is supplied with a USB rechargeable li-ion cell but can also use AAs.

Please note, all quoted lumen figures are from a DIY integrating sphere, and according to ANSI standards. Although every effort is made to give as accurate a result as possible, they should be taken as an estimate only. The results can be used to compare outputs in this review and others I have published.

Note the Parasitic drain of the WT16R cannot be measured, and for the WT20R the li-ion and AA values differ slightly. Also note that when using AAs, the WT20R cannot output on High.

The following gallery has the lumen output graph and USB recharging trace for the WT16R first, then the WT20R. For the WT16R the two traces are the spot and flood beam outputs, and for the WT20R the two traces are for the (higher output) flood beam, but powered with the supplied li-ion cell and then AA Eneloop cells.


The WT16R and WT20R in use:
This gallery actually says without words most of what I want to say, so let’s start with that…


The first of those images shows the WT16R using its tail magnet to give downward facing hands-free lighting from the side panel flood light, along with the WT20R aiming at another area. Then the WT16R on the front of a boiler lighting up the control panel. Remember there is also a second magnet on the clip, so if you needed to tuck the WT16R up under something you can do this as well. Similarly you can use the spot beam if you need the light concentrated in a smaller area.

Onto the WT20R and its articulated head. The gallery has a photo showing the extreme angle range the head can be moved to, it is not just 90 degrees of motion, but 105 degrees of motion from fully straight to a slight downward angle when tail-standing it. Combined with the magnetic tail, the WT20R is a superbly ‘aim-able’ light. You can mount/stand it and then angle the head to put the light exactly where you want it, easily and quickly. You even have a choice of flood or spot beams as well.

These are true ‘working lights’. They are illumination tools, and designed such that you can use them hands-free and put them into difficult locations which you might not be able to with a headlamp.

Using side switches makes the controls very natural to use, the only minor comment I would have on this is that the side the power switch is on is better suited to right-handed use. When using the WT20R with head angled, or the WT16R’s side panel light, for left-handed use this means either using a finger curled round underneath, or a slightly switch on and twist round action. This minor point is unavoidable really, so is not a criticism, more of a consideration.

If you have one or both of these you will wonder why you struggled on with a normal light for so long, when these make mobile task-lighting a breeze.

Review Summary
The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond that covered in the review.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________
What doesn’t work so well for me
_______________________________________________

WT16R – has a non-removable cell, so no on-the-go battery changes.
WT20R – the battery door clip can be a bit awkward to release.

_______________________________________________
Things I like
_______________________________________________

WT16R – Side panel flood and Front spot output.
WT16R – Side panel flood also has flashing amber mode.
WT16R – USB-C charging.
WT16R – Ergonomic Side switch.
WT16R – Wide, strong clip.
WT16R – Two different magnetic mounting points.
WT16R – Power level gauge.
WT20R – Beam can be switched from flood to spot.
WT20R – 105 degrees of head articulation.
WT20R – Duel-fuel option of supplied li-ion or AA.
WT20R – Supplied li-ion cell is USB rechargeable.
WT20R – Wide, strong clip.
WT20R – Magnetic base.
WT20R – Ergonomic Side switch.
WT20R – Power level gauge.

 
Discussing the Review:
The ideal place to discuss this review is on the Tactical Reviews Facebook Page
Please visit there and start/join the conversation.

As well as the Tactical Reviews Facebook Page, please consider visiting one of the following to start/join in any discussion.

CandlePowerForums

BudgetLightForum