EDC Gear Review: Nite Ize S-Biner with SlideLock, MicroLock plus GearLine

There are some things that are so useful you can’t really image life without them. Nite Ize’s S-Biners are one of those designs that have simply integrated themselves into so many of my every-day activities I’d be lost without them. For some these will need no introduction, but if you haven’t used them before it is very likely the S-Biner is going to find a way into your selection of gear.

 photo 01 NiteIze S-Biner Group boxed P1210803.jpg

A few more details:

In the introduction image are all the versions of the S-Biner featuring in this review, which include the S-Biner – #10, S-Biner – #8, S-Biner SlideLock, S-Biner MicroLock, S-Biner® MicroLock® – Polycarbonate, KeyRack Locker® – Polycarbonate S-Biner® MicroLocks® and GearLine Organization System 4FT.

Moving forward I’m breaking this down into three groups, the larger S-Biners, micro S-Biners and the Gearline system.

Starting with the BIG S-Biner – #10 and S-Biner – #8, plus the S-Biner SlideLock.
 photo 02 NiteIze S-Biner Group1 P1210807.jpg

Here are the first set of S-Biners
 photo 04 NiteIze S-Biner Group1 unboxed P1210814.jpg

The packs say ‘BIG’, and big they are. These are the two largest S-Biner models. They only come in plastic versions and give you the option of a super-sized clip.
 photo 05 NiteIze S-Biner large in hand P1210818.jpg

Of course the SlideLock S-Biners are much more normal in size for clipping keys and anything else to bags, belts etc.
 photo 06 NiteIze S-Biner small in hand P1210829.jpg

With the SlideLock, you can see the black plastic slider on each gate. Here the top one is locked and the other unlocked.
 photo 11 NiteIze S-Biner slide P1210855.jpg

The instructions for the SlideLock are very clear, but you don’t need these, it is obvious how simply and easily they work.
 photo 03 NiteIze S-Biner lock P1210813.jpg

Looking in closer at the slider, it is shaped so that it won’t easily fall off the gate bar.
 photo 12 NiteIze S-Biner slider P1210858.jpg

In the locked position the gate is positively held closed so the S-Biner won’t get twisted off and become lost.
 photo 13 NiteIze S-Biner slide locked P1210865.jpg

Next up are the real key-ring sized S-Biner models the Micro-versions. In this case these all feature the micro-lock design.
 photo 07 NiteIze S-Biner Group2 P1210830.jpg

We have the standard metal S-Biner MicroLock, then the ultra-light Polycarbonate S-Biner® MicroLock®, and lastly the KeyRack Locker® – Polycarbonate S-Biner® MicroLocks® where the keyrack is metal and the S-Biners are Polycarbonate.
 photo 08 NiteIze S-Biner Group2 unboxed P1210841.jpg

The MicroLock is a stroke of genius. With the smaller clips you are often carrying vital objects like keys. Previously the smallest S-Biners were pretty secure, but with the MicroLock you remove all doubt.
In the middle is a small plastic arm which rotates. When aligned lengthways, the gates are unlocked, but when turned cross-ways and clicked into the locked position, both gates are locked shut. Sitting on these or otherwise giving them a hard time won’t shift those gates – believe me, I’ve given them a run for their money and the lock has not let me down.
 photo 09 NiteIze S-Biner micro close P1210846.jpg

Same hand (I take an XL size glove by-the-way) and these are as small as they can be, but still easy to use.
 photo 10 NiteIze S-Biner Group2 in hand P1210852.jpg

Lastly in this review is a logical extension of the usefulness of the S-Biner, and that is the GearLine. This is the GearLine Organization System 4FT.
 photo 15 NiteIze S-Biner gearline P1210873.jpg

This system contains 5 x #2 and 5 x #4 Plastic S-Biners on a special webbing strap with 2 x 12″ Gear Ties, one on each end.
 photo 16 NiteIze S-Biner gearline unboxed P1210880.jpg

The Gear Tie fresh out of the box.
 photo 17 NiteIze S-Biner gearline end P1210883.jpg

Along the webbing strap are a series of loops formed by the double layer of webbing.
 photo 18 NiteIze S-Biner gearline loop P1210887.jpg

Two sizes of plastic S-Biners are used (#2 and #4).
 photo 19 NiteIze S-Biner gearline sizes P1210891.jpg

Quickly comparing the S-Biners in the GearLine system and the three sizes of SlideLock S-Biners.
 photo 20 NiteIze S-Biner gearline comparing P1210894.jpg

Those Gear Ties just untwist and are a stronger version of twisty-ties.
 photo 21 NiteIze S-Biner gearline twist P1210900.jpg

What it is like to use?

Anyone leading an active life and who uses a variety of gear will need and use clips and karabiners of various types. The biggest revelation of the S-Biner design over karabiners is the double-gate. This keeps the item you are carrying secured separately to whatever you are attaching it to. A simple thing, but it means that when you open one gate or the other, you are either releasing the item, or taking the S-Biner off from the attachment point.
With a standard karabiner when you open the gate both the item carried and the fixing point can be released; not always what you want. Intended as true load-bearing devices, the karabiner is usually larger and heavier than you might want. Not only does the S-Biner take a karabiner to a more useful layout, but it is also not as big and heavy, as it is not intended to carry the weight of a person.

When preparing this review I wondered how I would show the extent to which I use these, but while standing there in my photo studio, I just patted myself down and pulled all these out of my pockets/belt. We’ll take these one at a time in a moment, but you see how integrated these are.
 photo 24 NiteIze S-Biner in use P1250369.jpg

So the biggest here is a torch/flashlight pouch which is clipped onto my belt or belt loop, or onto my backpack.
 photo 25 NiteIze S-Biner pouch P1250374.jpg

Mainly a marker, this Glo-Toob is left to flap about (normally on my backpack) so needs the extra security of a locking S-Biner.
 photo 26 NiteIze S-Biner glo-toob P1250377.jpg

A couple of work related items which need to go from one bag to another and the KeyRack holds a SecurID tag and a USB flash drive. There is normally another flash drive on here but it has been lent at this time.
 photo 27 NiteIze S-Biner serureid P1250381.jpg

On this kevlar cord retracting key ring is a MicroLock S-Biner that has been particularly heavily tested. Sat on, caught in doors and accidentally hooked onto this and that, the door entry tag has never come loose.
 photo 28 NiteIze S-Biner door tag P1250386.jpg

Then my keys. Pretty heavily loaded with more non-key items in the wrap, but outside the widgy pry-bar and a TUBE light are held securely with the plastic MicroLocks.
 photo 29 NiteIze S-Biner widgy P1250389.jpg

So that GearLine, where is it? When I go camping I do use this inside the tent, but it also has an every-day use, which for me is in the boot (trunk) of the car. Fixed between two headrest posts, the GearLine gives me lots of fixing points to stop various items moving round. Most often I use this to keep shopping bags from rolling around and emptying themselves, but other things go on and off the S-Biners.
 photo 23 NiteIze S-Biner gearline car P1250346.jpg

The only aspect of the S-Biner that occasionally causes a problem is that there is a groove in each hook where the gate bar sits when it is closed, and when taking the S-Biner out of a tight-fitting loop, sometimes this groove catches and makes it difficult to remove. Other clip designs also have this but the S-Biners somehow seem to catch more than most. I certainly forgive the design this minor flaw as overall the S-Biner makes the karabiner a practical true ever-day carry item and I would not be without them.

The BIG S-Biners also bring this practicality to a much larger scale. I carry the #10 S-Biner as a backpack hook and use it to hang the bag on tree limbs, rails and any other suitable hanging point up to the thickness of your wrist.

You have a choice of size, weights (plastic or metal), materials which are either stronger or anti-scratch as well as two types of lock.

Review Summary

The views expressed in this summary table are from the point of view of the reviewer’s personal use. I am not a member of the armed forces and cannot comment on its use beyond a cutting tool or field/hunting knife.

Something that might be a ‘pro’ for one user can be a ‘con’ for another, so the comments are categorised based on my requirements. You should consider all points and if they could be beneficial to you.

_______________________________________________ _______________________________________________
Things I like What doesn’t work so well for me
_______________________________________________ _______________________________________________
Double-Gate karabiner design. Sometimes catch when removing from tight loops.
Choice of Sizes. (seriously can’t think of anything else)
Choice of Materials.
Choice of two types of lock.
GearLine extends functionality.

 photo 14 NiteIze S-Biner group 1 2 P1210871.jpg

 

Discussing the Review:

Please feel free to add comments to the review, but the ideal place to freely discuss these reviews is on a forum. If you started reading the shorter forum version of the review, but followed the link this full exclusive review, please return to that forum to discuss the review there.
If you read the review entirely on Tactical Reviews, please consider one of the following to join in any discussion.

EdgeMatters – Sponsored Reviews (UK based Forum for Knife Makers and Collectors)

BladeForums – Knife Reviews (US based Forum for Knife Discussion)

CandlePowerForums – Knife Reviews Section (Largest and Friendliest Flashlight Community Forum)